DRV5053 Analog-Bipolar Hall Effect Sensor

1 Features

Linear output hall sensor
Superior temperature stability
- Sensitivity ±10% over temperature
High sensitivity options:
- –11 mV/mT (OA, see Figure 17)
- –23 mV/mT (PA)
- –45 mV/mT (RA)
- –90 mV/mT (VA)
- +23 mV/mT (CA)
- +45 mV/mT (EA)
Supports a wide voltage range
- 2.5 V to 38 V
- No external regulator required
Wide operating temperature range
- T_A = –40 to 125°C (Q, see Figure 17)
Amplified output stage
- 2.3-mA sink, 300-µA source
Output voltage: 0.2 V to approximately 1.8 V
- B = 0 mT, OUT = 1 V
Fast power-on: 35 µs
Small package and footprint
- Surface mount 3-pin SOT-23 (DBZ)
  - 2.92 mm × 2.37 mm
- Through-hole 3-pin TO-92 (LPG)
  - 4.00 mm × 3.15 mm
Protection features:
- Reverse supply protection (up to –22 V)
- Supports up to 40-V load dump
- Output short-circuit protection
- Output current limitation