
                                PLANES PROCESSOR
                                ----------------

                         05:42 PM Tuesday, June 17, 2014
Job Name: C:\TempLayouts\PCM5242-TPA6120A2_QFN-REF2\PCB\PCM5242-TPA6120A2_QFN-REF2.pcb




    POSITIVE PLANE LAYER : 1

        Plane Shapes Found On This Layer : 3
        Plane Holes  Found On This Layer : 13


        PLANE NET : GND

            Total Plane Shapes For This Net   : 1
            Use Route Border As Plane Shape   : NO
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 0.2500mm
            Plane To Other Metal Clearance    : 0.0000mm
            Mounting Hole / Contour Clearance : 0.1520mm
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : YES
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Tie Leg Width                 : 0.5000mm
                Thermal Clearance             : 0.3000mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default Thru Tie Properties
                Tie Leg Width                 : 0.7500mm
                Thermal Clearance             : 0.3000mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default SMD Tie Properties
                Tie Leg Width                 : 0.5000mm
                Thermal Clearance             : 0.3000mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Eliminate Untied Areas            : YES
            Eliminate Single Tied Areas       : NO
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : NO
            Default Hatch Width               : 0.2500mm
            Default Hatch Distance            : 0.2500mm
            Default Hatch Pattern             : (|) Vertical
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 152
            Total Thru Pads Of This Net       : 45
            Total SMD  Pads Of This Net       : 26

            Plane Created : Layer 1 - Net GND

                Via Pads In This Plane           : 152
                Thru Pads In This Plane          : 45
                SMD Pads In This Plane           : 26
                     
                Pads To Be Buried In Plane       : 204
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0
                Pads With 4/4 Tie Connections    : 18
                Pads With 3/4 Tie Connections    : 1

                    Pads With 3 Tie Legs : 1
                        Coordinates (mm) :
                                1) X=47.0000     Y=11.7700       Pin: ADR1/MISO/FMT-2  


    POSITIVE PLANE LAYER : 2

        Plane Shapes Found On This Layer : 1
        Plane Holes  Found On This Layer : 0


        PLANE NET : GND

            Total Plane Shapes For This Net   : 1
            Use Route Border As Plane Shape   : NO
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 0.2500mm
            Plane To Other Metal Clearance    : 0.0000mm
            Mounting Hole / Contour Clearance : 0.1520mm
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : YES
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Tie Leg Width                 : 0.5000mm
                Thermal Clearance             : 0.3000mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default Thru Tie Properties
                Tie Leg Width                 : 0.7500mm
                Thermal Clearance             : 0.3000mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default SMD Tie Properties
                Tie Leg Width                 : 0.5000mm
                Thermal Clearance             : 0.3000mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Eliminate Untied Areas            : YES
            Eliminate Single Tied Areas       : NO
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : NO
            Default Hatch Width               : 0.2500mm
            Default Hatch Distance            : 0.2500mm
            Default Hatch Pattern             : (|) Vertical
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 152
            Total Thru Pads Of This Net       : 45
            Total SMD  Pads Of This Net       : 0

            Plane Created : Layer 2 - Net GND

                Via Pads In This Plane           : 152
                Thru Pads In This Plane          : 45
                SMD Pads In This Plane           : 0
                     
                Pads To Be Buried In Plane       : 181
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0
                Pads With 4/4 Tie Connections    : 16


    POSITIVE PLANE LAYER : 3

        Plane Shapes Found On This Layer : 5
        Plane Holes  Found On This Layer : 0


        PLANE NET : +3.3V

            Total Plane Shapes For This Net   : 1
            Use Route Border As Plane Shape   : NO
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 0.2500mm
            Plane To Other Metal Clearance    : 0.0000mm
            Mounting Hole / Contour Clearance : 0.1524mm
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : NO
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Tie Leg Width                 : 0.2500mm
                Thermal Clearance             : 0.2500mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default Thru Tie Properties
                Tie Leg Width                 : 0.2500mm
                Thermal Clearance             : 0.2000mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default SMD Tie Properties
                Tie Leg Width                 : 0.2500mm
                Thermal Clearance             : 0.2000mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Eliminate Untied Areas            : NO
            Eliminate Single Tied Areas       : NO
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : NO
            Default Hatch Width               : 0.2500mm
            Default Hatch Distance            : 0.2500mm
            Default Hatch Pattern             : (|) Vertical
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 22
            Total Thru Pads Of This Net       : 1
            Total SMD  Pads Of This Net       : 0

            Plane Created : Layer 3 - Net +3.3V

                Via Pads In This Plane           : 20
                Thru Pads In This Plane          : 0
                SMD Pads In This Plane           : 0
                     
                Pads To Be Buried In Plane       : 20
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0


        PLANE NET : GND

            Total Plane Shapes For This Net   : 1
            Use Route Border As Plane Shape   : NO
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 0.2500mm
            Plane To Other Metal Clearance    : 0.0000mm
            Mounting Hole / Contour Clearance : 0.1520mm
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : YES
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Tie Leg Width                 : 0.5000mm
                Thermal Clearance             : 0.3000mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default Thru Tie Properties
                Tie Leg Width                 : 0.7500mm
                Thermal Clearance             : 0.3000mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default SMD Tie Properties
                Tie Leg Width                 : 0.5000mm
                Thermal Clearance             : 0.3000mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Eliminate Untied Areas            : YES
            Eliminate Single Tied Areas       : NO
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : NO
            Default Hatch Width               : 0.2500mm
            Default Hatch Distance            : 0.2500mm
            Default Hatch Pattern             : (|) Vertical
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 152
            Total Thru Pads Of This Net       : 45
            Total SMD  Pads Of This Net       : 0

            Plane Created : Layer 3 - Net GND

                Via Pads In This Plane           : 100
                Thru Pads In This Plane          : 45
                SMD Pads In This Plane           : 0
                     
                Pads To Be Buried In Plane       : 129
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0
                Pads With 4/4 Tie Connections    : 15
                Pads With 3/4 Tie Connections    : 1

                    Pads With 3 Tie Legs : 1
                        Coordinates (mm) :
                                1) X=19.5000     Y=60.5000       Pin: SPDIF-2  


        PLANE NET : +1.8V

            Total Plane Shapes For This Net   : 1
            Use Route Border As Plane Shape   : NO
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 0.2500mm
            Plane To Other Metal Clearance    : 0.0000mm
            Mounting Hole / Contour Clearance : 0.1520mm
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : NO
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Tie Leg Width                 : 0.2500mm
                Thermal Clearance             : 0.2500mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default Thru Tie Properties
                Tie Leg Width                 : 0.2500mm
                Thermal Clearance             : 0.2000mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default SMD Tie Properties
                Tie Leg Width                 : 0.2500mm
                Thermal Clearance             : 0.2000mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Eliminate Untied Areas            : YES
            Eliminate Single Tied Areas       : NO
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : NO
            Default Hatch Width               : 0.2500mm
            Default Hatch Distance            : 0.2500mm
            Default Hatch Pattern             : (|) Vertical
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 10
            Total Thru Pads Of This Net       : 0
            Total SMD  Pads Of This Net       : 0

            Plane Created : Layer 3 - Net +1.8V

                Via Pads In This Plane           : 8
                Thru Pads In This Plane          : 0
                SMD Pads In This Plane           : 0
                     
                Pads To Be Buried In Plane       : 8
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0


    POSITIVE PLANE LAYER : 4

        Plane Shapes Found On This Layer : 5
        Plane Holes  Found On This Layer : 0


        PLANE NET : GND

            Total Plane Shapes For This Net   : 1
            Use Route Border As Plane Shape   : NO
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 0.2500mm
            Plane To Other Metal Clearance    : 0.0000mm
            Mounting Hole / Contour Clearance : 0.3000mm
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : YES
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Tie Leg Width                 : 0.5000mm
                Thermal Clearance             : 0.3000mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default Thru Tie Properties
                Tie Leg Width                 : 0.7500mm
                Thermal Clearance             : 0.3000mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default SMD Tie Properties
                Tie Leg Width                 : 0.5000mm
                Thermal Clearance             : 0.3000mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Eliminate Untied Areas            : YES
            Eliminate Single Tied Areas       : NO
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : NO
            Default Hatch Width               : 0.2500mm
            Default Hatch Distance            : 0.2500mm
            Default Hatch Pattern             : (|) Vertical
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 152
            Total Thru Pads Of This Net       : 45
            Total SMD  Pads Of This Net       : 74

            Plane Created : Layer 4 - Net GND

                Via Pads In This Plane           : 152
                Thru Pads In This Plane          : 45
                SMD Pads In This Plane           : 74
                     
                Pads To Be Buried In Plane       : 254
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0
                Pads With 4/4 Tie Connections    : 16
                Pads With 2/4 Tie Connections    : 1

                    Pads With 2 Tie Legs : 1
                        Coordinates (mm) :
                                1) X=25.7256     Y=13.0000       Pin: BUF5-4  



                        05:42 PM Tuesday, June 17, 2014