Home Data converters Analog-to-digital converters (ADCs) Precision ADCs
Home
Data converters
Analog-to-digital converters (ADCs)
Precision ADCs

ADS1259-Q1

ACTIVE

Automotive, 24-bit, 14.4kSPS, 1-ch delta-sigma ADC w/ low-drift Vref for high-dynamic range systems

Order now
Data sheet

ADS1259-Q1

ACTIVE
Data sheet Order now

Product details

Resolution (Bits) 24 Sample rate (max) (ksps) 14.4 Number of input channels 1 Interface type SPI Architecture Delta-Sigma Input type Differential, Single-ended Rating Automotive Reference mode External, Internal Input voltage range (max) (V) 2.75, 5.35 Input voltage range (min) (V) -2.7, 0 Features 50/60 Hz Rejection, Oscillator Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 13 Analog supply (min) (V) 4.75 Analog supply voltage (max) (V) 5.25 Digital supply (min) (V) 2.7 Digital supply (max) (V) 5.25
Resolution (Bits) 24 Sample rate (max) (ksps) 14.4 Number of input channels 1 Interface type SPI Architecture Delta-Sigma Input type Differential, Single-ended Rating Automotive Reference mode External, Internal Input voltage range (max) (V) 2.75, 5.35 Input voltage range (min) (V) -2.7, 0 Features 50/60 Hz Rejection, Oscillator Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 13 Analog supply (min) (V) 4.75 Analog supply voltage (max) (V) 5.25 Digital supply (min) (V) 2.7 Digital supply (max) (V) 5.25
TSSOP (PW) 20 41.6 mm² 6.5 x 6.4
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Results:
    • Temperature Grade 1: –40°C to 125°C
    • HBM ESD Classification 2
    • CDM ESD Classification C4B
  • Programmable Data Rates: 10 SPS to 14.4 kSPS
  • Single-Cycle Settling Digital Filter
  • High Performance:
    • 21.3 ENOB at 1.2 kSPS
    • INL: 3 ppm
    • Offset Drift: 0.05 µV/°C
    • Gain Drift: 0.5 ppm/°C
  • Internal Reference: 2.5 V, 10 ppm/°C Drift
  • Internal 2% Accurate Oscillator
  • Input Signal Out-of-Range Detection
  • Optional Checksum and Redundant Data-Read Capability
    to Augment Data Integrity
  • SPI-Compatible Interface, Mode 1
  • Analog Supply: 5 V or ±2.5 V
  • Digital Supply: 2.7 V to 5 V
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Results:
    • Temperature Grade 1: –40°C to 125°C
    • HBM ESD Classification 2
    • CDM ESD Classification C4B
  • Programmable Data Rates: 10 SPS to 14.4 kSPS
  • Single-Cycle Settling Digital Filter
  • High Performance:
    • 21.3 ENOB at 1.2 kSPS
    • INL: 3 ppm
    • Offset Drift: 0.05 µV/°C
    • Gain Drift: 0.5 ppm/°C
  • Internal Reference: 2.5 V, 10 ppm/°C Drift
  • Internal 2% Accurate Oscillator
  • Input Signal Out-of-Range Detection
  • Optional Checksum and Redundant Data-Read Capability
    to Augment Data Integrity
  • SPI-Compatible Interface, Mode 1
  • Analog Supply: 5 V or ±2.5 V
  • Digital Supply: 2.7 V to 5 V

The ADS1259-Q1 is a precision, low-drift, 24-bit, analog-to-digital converter (ADC). The device can perform conversions at data rates up to 14.4 kSPS with high resolution and is therefore ideally suited to measure rapidly changing signals that have a wide dynamic range. An integrated low-noise, low-drift 2.5-V reference eliminates the need for an external voltage reference, thus reducing system cost and component count.

The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise performance and linearity. The device can use the integrated oscillator, an external crystal, or an external clock as the ADC clock source.

A fast-responding input overrange detector flags the conversion data if an input overrange event occurs. To augment data integrity in noisy automotive environments the ADS1259-Q1 offers an optional checksum byte and a redundant conversion data-read capability.

The ADS1259-Q1 consumes 13 mW during operation and less than 25 µW when powered down. TI offers the ADS1259-Q1 device in a TSSOP-20 package with full specification from –40°C to 125°C.

The ADS1259-Q1 is a precision, low-drift, 24-bit, analog-to-digital converter (ADC). The device can perform conversions at data rates up to 14.4 kSPS with high resolution and is therefore ideally suited to measure rapidly changing signals that have a wide dynamic range. An integrated low-noise, low-drift 2.5-V reference eliminates the need for an external voltage reference, thus reducing system cost and component count.

The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise performance and linearity. The device can use the integrated oscillator, an external crystal, or an external clock as the ADC clock source.

A fast-responding input overrange detector flags the conversion data if an input overrange event occurs. To augment data integrity in noisy automotive environments the ADS1259-Q1 offers an optional checksum byte and a redundant conversion data-read capability.

The ADS1259-Q1 consumes 13 mW during operation and less than 25 µW when powered down. TI offers the ADS1259-Q1 device in a TSSOP-20 package with full specification from –40°C to 125°C.
filter Find other Precision ADCs
Download

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 1
Type Title Date
* Data sheet Automotive, 14.4-kSPS, 24-Bit ADC with Integrated Low-Drift Reference datasheet 19 Mar 2014

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​