Home Battery management ICs Battery fuel gauges
Home
Battery management ICs
Battery fuel gauges

BQ27411-G1

ACTIVE

Pack-side Impedance Track™ fuel gauge | battery gas gauge

Order now
Data sheet

A newer version of this product is available

open-in-new Compare alternates
Same functionality with different pin-out to the compared device
BQ27220 ACTIVE Single cell pack/system-side CEDV battery fuel (gas) gauge w/pre-programmed chemistry profiles Low power consumption, battery state-of-health (aging) estimates, internal temperature sensor

BQ27411-G1

ACTIVE
Data sheet Order now

Product details

Cell chemistry Li-Ion/Li-Polymer Number of series cells Single Cell Communication interface I2C Battery capacity (min) (mAh) 200 Battery capacity (max) (mAh) 8000 Implementation Pack External capacity indication None Features Impedance Track™ algorithm Operating temperature range (°C) -40 to 85 Rating Catalog
Cell chemistry Li-Ion/Li-Polymer Number of series cells Single Cell Communication interface I2C Battery capacity (min) (mAh) 200 Battery capacity (max) (mAh) 8000 Implementation Pack External capacity indication None Features Impedance Track™ algorithm Operating temperature range (°C) -40 to 85 Rating Catalog
VSON (DRZ) 12 10 mm² 4 x 2.5
  • Single-Cell Li-Ion Battery Fuel Gauge
    • Resides in Battery Pack
    • Low-Value External Sense Resistor
      (10 mΩ Typical)
    • One Time Programmable (OTP) Configuration Non-Volatile Memory (NVM)
    • Powered Directly from Battery with Integrated LDO
    • 400-kHz I2C™ Serial Interface
    • Internal Temperature Sensor or
      Host-reported Temperature
  • Battery Fuel Gauging Based on Patented Impedance Track™ Technology
    • Reports Remaining Capacity and State of Charge (SOC) with Smoothing Filter
    • Automatically Adjusts for Battery Aging, Self-discharge, Temperature, and Rate Changes
    • Battery State of Health (Aging) Estimation
  • Single-Cell Li-Ion Battery Fuel Gauge
    • Resides in Battery Pack
    • Low-Value External Sense Resistor
      (10 mΩ Typical)
    • One Time Programmable (OTP) Configuration Non-Volatile Memory (NVM)
    • Powered Directly from Battery with Integrated LDO
    • 400-kHz I2C™ Serial Interface
    • Internal Temperature Sensor or
      Host-reported Temperature
  • Battery Fuel Gauging Based on Patented Impedance Track™ Technology
    • Reports Remaining Capacity and State of Charge (SOC) with Smoothing Filter
    • Automatically Adjusts for Battery Aging, Self-discharge, Temperature, and Rate Changes
    • Battery State of Health (Aging) Estimation

The Texas Instruments bq27411-G1 device is a battery fuel gauging solution for single-cell Li-Ion battery packs. The device requires minimal configuration and uses One Time Programmable (OTP) Non-Volatile Memory (NVM) to avoid an initialization download by the system processor.

The fuel gauge uses the patented Impedance Track™ algorithm for fuel gauging, and provides information such as remaining battery capacity (mAh), state-of-charge (%), and battery voltage (mV).

The small, 12-pin, 2.50 mm × 4.00 mm, Small Outline No-Lead (SON) package is ideal for space-constrained applications.

The Texas Instruments bq27411-G1 device is a battery fuel gauging solution for single-cell Li-Ion battery packs. The device requires minimal configuration and uses One Time Programmable (OTP) Non-Volatile Memory (NVM) to avoid an initialization download by the system processor.

The fuel gauge uses the patented Impedance Track™ algorithm for fuel gauging, and provides information such as remaining battery capacity (mAh), state-of-charge (%), and battery voltage (mV).

The small, 12-pin, 2.50 mm × 4.00 mm, Small Outline No-Lead (SON) package is ideal for space-constrained applications.

filter Find other Battery fuel gauges
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 5
Type Title Date
* Data sheet bq27411-G1 Single-Cell Li-Ion Battery Fuel Gauge for Battery Pack Integration datasheet (Rev. D) PDF | HTML 02 Jan 2016
Application note Method for TI Gauge to Avoid SOC Jump on Smart Phone Application 25 Feb 2022
Application note Enhanced Resolution Gauging for Low Current Applications Using Scaling 26 Oct 2016
User guide bq27411EVM System-Side Impedance Track Fuel Gauge (Rev. A) 31 Jul 2016
User guide bq27411-G1 Technical Reference Manual (Rev. B) 05 Jun 2015

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

BQ27411EVM-G1C — BQ27411EVM-G1C Pack-Side Impedance Track™ Fuel (Gas) Gauge Evaluation Module

The BQ27411EVM-G1C Pack-Side Impedance Track™ Fuel (Gas) Gauge evaluation module is a complete evaluation system for the bq27411-G1C. The EVM includes one bq27411-G1C circuit module with external current-sense resistor.  The bq27411-G1C should be used with batteries that have a 4.35 V (...)

User guide: PDF
Not available on TI.com
Evaluation board

BQ27441EVM-G1A — BQ27441 evaluation board 

The BQ27441EVM-G1A evaluation module is a complete evaluation system for the bq27441-G1A. The EVM includes one bq27441-G1A circuit module with external current-sense resistor. The bq27441-G1A should be used with batteries that have a 4.2 V charge voltage. A separate orderable EV2300 or EV2400 PC (...)
User guide: PDF
Not available on TI.com
Evaluation board

BQ27441EVM-G1B — BQ27441 evaluation board 

The BQ27441EVM-G1B evaluation module is a complete evaluation system for the bq27441-G1B. The EVM includes one bq27441-G1B circuit module with an external current-sense resistor. The bq27441-G1B should be used with batteries that have a 4.3 or 4.35 V charge voltage. A separate orderable EV2400 PC (...)
User guide: PDF
Not available on TI.com
Application software & framework

BQSTUDIO — Battery Management Studio (bqStudio) Software

Battery Management Studio (bqStudio) offers a full suite of robust tools to assist with the process of evaluating, designing with, configuring, testing, or otherwise utilizing TI Battery management products. This includes features that provide full access to registers and data memory including (...)
View Options
Support software

BQEVSW-MKST-UPDATE — Software Update to enable BQEVSW to use MKST-3P-ALT-EV2300

BQ-BATTERY-PROGRAMMER-SW software development kit (SDK) is a collection of robust software command line tools that assist with the process of programming, testing, or assembling packs that use TI Battery management products. The executables in this software work with the MKST-3P-ALT-EV2300 MKS (...)

Supported products & hardware

Supported products & hardware

Products
Battery fuel gauges
  • BQ2083-V1P3 — SBS-compliant gas gauge for use with bq29311
  • BQ20Z40 — SBS Compliant Gas Gauge with Impedance Track Technology for use with BQ29330
  • BQ20Z40-R1 — SBS 1.1 compliant Gas Gauge with Impedance Track™ Technology
  • BQ20Z45 — SBS 1.1 compliant Gas Gauge with Impedance Track Technology and Advanced Charging Algorithm
  • BQ20Z70-V150 — SBS 1.1-compliant gas gauge enabled with Impedance Track™ technology
  • BQ20Z70-V160 — SBS 1.1-compliant gas gauge enabled with Impedance Track™ technology for use with the bq29330
  • BQ20Z80 — SBS 1.1-compliant gas gauge enabled with Impedance Track™; technology for use with the bq29312
  • BQ20Z80-V102 — SBS 1.1-compliant gas gauge enabled w/Impedance Track™ technology
  • BQ20Z80-V110 — SBS 1.1-compliant gas gauge enabled w/Impedance Track™ technology with FW v1.10
  • BQ20Z80A-V110 — SBS 1.1 compliant gas gauge enabled with Impedance Track™; technology for use with the bq29312A
  • BQ27411-G1 — Pack-side Impedance Track™ fuel gauge | battery gas gauge
  • BQ27421-G1 — System-side(tm) fuel gauge with integrated Sense Resistor | battery gas gauge
  • BQ27425-G1 — System-side Impedance Track™; fuel gauge with direct battery connection | gas gauge battery
  • BQ27425-G2A — System-side Impedance Track™; fuel gauge for LiCoO2 battery
  • BQ27425-G2B — System-side Impedance Track™; fuel gauge LiMn2O4 battery
  • BQ27426 — Single cell System-side battery fuel (gas) gauge w/Pre-programmed chemistry Profile
  • BQ27427 — Single-cell battery fuel gauge with pre-programmed chemistry and integrated sense resistor
  • BQ27441-G1 — System-side Impedance Track™ battery fuel (gas) gauge
  • BQ27505-J2 — System-side Impedance Track™; fuel gauge with FW v2.15
  • BQ27505-J3 — System-side Impedance Track™; fuel gauge with FW v2.20
  • BQ27505-J4 — System-side Impedance Track™; fuel gauge with FW v2.24
  • BQ27505-J5 — System-side Impedance Track™; fuel gauge with FW v2.29
  • BQ27520-G4 — System side Impedance Track™ fuel gauge with integrated LDO.
  • BQ27530-G1 — System-side Impedance-Track fuel (gas) gauge with direct battery connection
  • BQ27531-G1 — Battery management unit Impedance Track™ fuel (gas) gauge for bq2419x charger controller
  • BQ27532-G1 — Battery management unit Impedance Track™ fuel gauge for bq2425x charger
  • BQ27545-G1 — Single cell, pack side, Impedance Track™ fuel gauge
  • BQ27546-G1 — Single cell Impedance Track™ pack side fuel gauge with DSBGA package
  • BQ27621-G1 — System-side fuel gauge with Dynamic Voltage Correlation, battery gas gauge
  • BQ27741-G1 — Pack-side Impedance Track™(tm) fuel (gas) gauge with integrated protector
  • BQ27742-G1 — Single cell Li-ion battery fuel gauge with integrated protection | battery gas gauge
  • BQ3050 — SBS 1.1-compliant 2-s to 4-s battery gas gauge & protection
  • BQ3055 — 2-series, 3-series, and 4-series Li-ion battery pack manager
  • BQ3060 — SBS 1.1-compliant gas gauge and protector
  • BQ30Z554-R1 — 2 series, 3 series, and 4 series Li-ion battery pack manager
  • BQ34110 — Multi-chemistry high-cell Count battery fuel gauge with integrated rarely discharged module
  • BQ34Z100 — 1-s to 16-s Impedance Track™ fuel gauge | battery gas gauge
  • BQ34Z100-G1 — Multi-chemistry Impedance Track™ standalone fuel gauge | battery gas gauge
  • BQ34Z100-R2 — Multichemistry Impedance Track™ stand-alone fuel gauge
  • BQ34Z110 — Wide range fuel gauge with Impedance Track™; for lead acid batteries | battery gas gauge
Hardware development
Evaluation board
  • BQ2000EVM — Evaluation Module for Battery Charge Management IC
  • BQ2022AEVM-001 — BQ2022A Evaluation Module
  • BQ27411EVM-G1A — Pack-Side Impedance Track™ Fuel (Gas) Gauge Evaluation Module
  • BQ27411EVM-G1C — BQ27411EVM-G1C Pack-Side Impedance Track™ Fuel (Gas) Gauge Evaluation Module
  • BQ27421EVM-G1A — BQ27421EVM-G1A System-Side Battery Fuel (Gas) Gauge Evaluation Module Board
  • BQ27421EVM-G1B — BQ27421EVM-G1B System-Side Battery Fuel (Gas) Gauge Evaluation Module
  • BQ27425EVM-G2A — BQ27425EVM-G2A System-Side Impedance Track™ Fuel (Gas) Gauge Evaluation Module
  • BQ27426EVM-738 — BQ27426 EVM for Impedance Track Fuel Gauge w/Easy to Use Pre-programmed Chemistry Profiles
  • BQ27427EVM — BQ27427 evaluation module for Impedance Track™ battery gas gauge with integrated sense resistor
  • BQ27441EVM-G1A — BQ27441 evaluation board 
  • BQ27441EVM-G1B — BQ27441 evaluation board 
  • BQ27510EVM — System-Side Single-Cell Impedance Track™ Technology Evaluation Module  | Battery Fuel Gauge
  • BQ27520EVM — System-Side Impedance Track™ Battery Fuel Gauge Evaluation Module | Gas Gauge
  • BQ27530EVM — BQ27530EVM System-Side Impedance-Track Fuel (Gas) Gauge Direct Battery Connection Evaluation Module
  • BQ27531EVM — Battery Management Unit Impedance Track Fuel (Gas) Gauge Charger Controller Evaluation Module
  • BQ27532EVM-656 — Battery Charging Solution Evaluation Module
  • BQ27542EVM — Li-ion Battery Fuel Gauge Evaluation Module
  • BQ27546EVM-702 — bq27546 Gas Gauge with Impedance Track™ Technology
  • BQ27621EVM-G1 — System-Side Fuel (Gas) Gauge Dynamic Voltage Correlation Evaluation Module
  • BQ27741EVM — BQ27741EVM Pack-Side Impedance Track Fuel (Gas) Gauge Integrated Protector Evaluation Module
  • BQ27742EVM — bq27742-G1 Single Cell Li-ion Battery Fuel (Gas) Gauge Programmable Evaluation Module
  • BQ27750EVM-837 — BQ27750 1-Cell Programmable Battery Manager Evaluation Module
  • BQ3050EVM-001 — bq3050EVM SBS 1.1 Compliant Advanced Gas Gauge EVM
  • BQ34110EVM-796 — bq34110 Multi-Chemistry CEDV Battery Gas Gauge for Rarely Discharged Applications Evaluation Module
  • BQ34210IQ1EVM-826 — bq34210-Q1 Evaluation Module for System Side CEDV Fuel Gauge
  • BQ34Z100EVM — Bq34z100EVM 1s to 16s Impedance Track Fuel Gauge Battery Evaluation Module | Gas Gauge Battery
  • MKST-3P-ALT-EV2300 — MKS Technology alternative for EV2300 communications transceiver
Software
Support software
Application software & framework
  • BQEVSW — BQ evaluation software (BQEVSW) v0.0.92 for BQ30Z554-R1
Download options
Support software

SLUC561 — BQ27411-G1 Smart Flash Files

Supported products & hardware

Supported products & hardware

Products
Battery fuel gauges
  • BQ27411-G1 — Pack-side Impedance Track™ fuel gauge | battery gas gauge
Download
Reference designs

TIDA-00241 — Pack-Side Impedance Track Fuel Gauge

The Texas Instruments bq27411-G1 reference design is an easy to configure fuel gauging solution for single series cell Li-Ion battery packs. The device requires minimal configuration and uses One Time Programmable (OTP) Non-Volatile Memory (NVM) to avoid an initialization download by the system (...)
Test report: PDF
Schematic: PDF
Package Pins CAD symbols, footprints & 3D models
VSON (DRZ) 12 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos