DAC8805
14-Bit, Dual Channel, Parallel Interface, Multiplying Digital-to-Analog Converter
DAC8805
- ±0.5LSB DNL
- ±0.5LSB INL
- Low Noise: 12nV/Hz
- Low Power: IDD = 1µA per channel at 2.7V
- 2mA Full-Scale Current, with VREF = 10V
- Settling Time: 0.5µs
- 14-Bit Monotonic
- 4-Quadrant Multiplying Reference Inputs
- Reference Bandwidth: 10MHz
- Reference Input: ±18V
- Reference Dynamics: -105 THD
- Midscale or Zero Scale Reset
- Analog Power Supply: +2.7V to +5.5V
- TSSOP-38 Package
- Industry-Standard Pin Configuration
- Pin Compatible with the 16-Bit DAC8822
- Temperature Range: -40°C to +125°C
- APPLICATIONS
- Automatic Test Equipment
- Instrumentation
- Digitally Controlled Calibration
- Industrial Control PLCs
All trademarks are the property of their respective owners
The DAC8805 dual, multiplying digital-to-analog converter (DAC) is designed to operate from a single 2.7V to 5.5V supply.
The applied external reference input voltage VREF determines the full-scale output current. An internal feedback resistor (RFB) provides temperature tracking for the full-scale output when combined with an external, current-to-voltage (I/V) precision amplifier.
A RSTSEL pin allows system reset assertion (RS) to force all registers to zero code when RSTSEL = '0', or to mid-scale code when RSTSEL = '1'. Additionally, an internal power-on reset forces all registers to zero or mid-scale code at power-up, depending on the state of the RSTSEL pin.
A parallel interface offers high-speed communications. The DAC8805 is packaged in a space-saving TSSOP-38 package and has an industry-standard pinout. The device is specified from -40°C to +125°C.
For a 16-bit, pin-compatible version, see the DAC8822.
Technical documentation
Type | Title | Date | ||
---|---|---|---|---|
* | Data sheet | 14-Bit, Dual, Parallel Input, Multiplying Digital-to-Analog Converter datasheet (Rev. A) | 30 Mar 2007 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
ANALOG-ENGINEER-CALC — Analog engineer's calculator
PSPICE-FOR-TI — PSpice® for TI design and simulation tool
TINA-TI — SPICE-based analog simulation program
Package | Pins | CAD symbols, footprints & 3D models |
---|---|---|
TSSOP (DBT) | 38 | Ultra Librarian |
Ordering & quality
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
- Fab location
- Assembly location
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.