Home Audio, haptics & piezo Haptics & piezo drivers Haptics drivers
Home
Audio, haptics & piezo
Haptics & piezo drivers
Haptics drivers

DRV2511-Q1

ACTIVE

Automotive 8A haptic driver for solenoids with integrated fault-protection

Order now
Data sheet

DRV2511-Q1

ACTIVE
Data sheet Order now

Product details

Features Enable Haptic actuator type Solenoid Input signal Analog Output voltage (max) (V) 50 Shutdown current (ISD) (µA) 35 Startup time (ms) 10 Vs (max) (V) 26 Vs (min) (V) 4.5 Operating temperature range (°C) -40 to 125 Rating Automotive
Features Enable Haptic actuator type Solenoid Input signal Analog Output voltage (max) (V) 50 Shutdown current (ISD) (µA) 35 Startup time (ms) 10 Vs (max) (V) 26 Vs (min) (V) 4.5 Operating temperature range (°C) -40 to 125 Rating Automotive
HTSSOP (DAP) 32 89.1 mm² 11 x 8.1
  • AEC-Q100 Qualified for automotive applications:
    • Temperature grade 1: –40°C to 125°C, TA
    • Device HBM ESD classification level H2
    • Device CDM ESD classification level C3
  • Wide operating voltage (4.5 V - 18 V)
  • Capable of handling voltage of 30 V
  • High current drive (8-A Peak)
  • Low RDS(on), full H-bridge output
  • Integrated fault protection
    • Short-circuit protection
    • Over-temperature protection
    • Over-voltage and under-voltage protection
  • Analog input
  • Dedicated interrupt pin
  • AEC-Q100 Qualified for automotive applications:
    • Temperature grade 1: –40°C to 125°C, TA
    • Device HBM ESD classification level H2
    • Device CDM ESD classification level C3
  • Wide operating voltage (4.5 V - 18 V)
  • Capable of handling voltage of 30 V
  • High current drive (8-A Peak)
  • Low RDS(on), full H-bridge output
  • Integrated fault protection
    • Short-circuit protection
    • Over-temperature protection
    • Over-voltage and under-voltage protection
  • Analog input
  • Dedicated interrupt pin

The DRV2511-Q1 device is a high current haptic driver specifically designed for inductive loads, such as solenoids and voice coils.

The output stage of the DRV2511-Q1 device consists of a full H-bridge capable of delivering 8 A of peak current.

The DRV2511-Q1 device provides protection functions such as undervoltage lockout, over-current protection and over-temperature protection.

The DRV2511-Q1 device is automotive qualified.

The DRV2511-Q1 device is a high current haptic driver specifically designed for inductive loads, such as solenoids and voice coils.

The output stage of the DRV2511-Q1 device consists of a full H-bridge capable of delivering 8 A of peak current.

The DRV2511-Q1 device provides protection functions such as undervoltage lockout, over-current protection and over-temperature protection.

The DRV2511-Q1 device is automotive qualified.

filter Find other Haptics drivers
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* Data sheet DRV2511-Q1 8-A Automotive Haptic Drivers for Solenoid and Voice Coils datasheet (Rev. B) PDF | HTML 11 Sep 2018
User guide Haptic Control Console GUI (Rev. B) 14 Oct 2021
Technical article Four tech trends that improve the driver experience PDF | HTML 06 Jan 2017

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

DRV2511Q1EVM — DRV2511-Q1 Automotive Haptic Driver for Solenoids Evaluation Module

The DRV52511-Q1 evaluation module (EVM) allows a designer to driver to assess the device alone or connected to target actuators such as a solenoid to easily and quickly evaluate performance of the driver or the actuator in use conditions.
User guide: PDF
Not available on TI.com
GUI for evaluation module (EVM)

HAPTICS-CONSOLE — Haptic Control Console v1.6.0.2

The Haptic Control Console software is an evaluation and development suite for TI's haptic drivers. The Haptic Control Console software supports the evaluation of our haptic drivers and third-party haptic actuators to develop advanced tactile feedback.

To get started, simply connect an evaluation (...)

Supported products & hardware

Supported products & hardware

Products
Haptics drivers
  • DRV2510-Q1 — Automotive 3A haptic driver for solenoids with integrated diagnostics and load-dump protection
  • DRV2511-Q1 — Automotive 8A haptic driver for solenoids with integrated fault-protection
  • DRV2604 — Haptic driver for ERM/LRA with waveform memory & auto-resonance tracking
  • DRV2604L — Haptic driver for ERM/LRA with 2-V operation, waveform memory & auto-resonance tracking
  • DRV2605 — Haptic driver for ERM/LRA with waveform library & auto-resonance tracking
  • DRV2605L — Haptic driver for ERM/LRA with 2-V operation, waveform library & auto-resonance tracking
  • DRV2624 — Haptic driver for ERM/LRA with waveform memory, auto-resonance tracking, & low power consumption
  • DRV2625 — Haptic driver for ERM/LRA with waveform library, auto-resonance tracking, & low power consumption
Piezo drivers
  • DRV2667 — Haptic driver for piezo with integrated 105-V boost converter, waveform memory & DAC
Hardware development
Evaluation board
  • DRV-ACC16-EVM — Haptic accelerometer measurement tool
  • DRV2510Q1EVM — DRV2510-Q1 Automotive Haptic Driver for Solenoids with Integrated Diagnostics Evaluation Module
  • DRV2511Q1EVM — DRV2511-Q1 Automotive Haptic Driver for Solenoids Evaluation Module
  • DRV2604EVM-CT — DRV2604EVM-CT eval for Haptic Driver for ERM/LRA with Waveform Memory and Smart Loop Architecture
  • DRV2604LDGSEVM-M — DRV2604L Haptics Smart Loop Algorithm and Integrated RAM for Customized Waveform Breakout Board
  • DRV2604LEVM-CT — DRV2604L ERM and LRA Haptics Evaluation Kit
  • DRV2605EVM-CT — DRV2605EVM-CT ERM/LRA Haptic Driver Evaluation
  • DRV2605LDGSEVM-M — DRV2605L Breakout Board with Haptics Smart Loop Algorithm and TouchSense 2200™ Effects Library
  • DRV2605LEVM-CT — DRV2605L ERM and LRA Haptics Evaluation Kit
  • DRV2605LEVM-MD — DRV2605L Multi-Driver Board for ERM and LRA Haptic Feedback
  • DRV2624EVM-CT — DRV2624 evaluation board with capacitive touch
  • DRV2624EVM-MINI — DRV2624 Breakout Board for ERM / LRA Haptics
  • DRV2625EVM-CT — DRV2625 Evaluation Board with Bluetooth and Capacitive Touch
  • DRV2625EVM-MINI — DRV2625 Breakout Board for ERM / LRA Haptics
  • DRV2667EVM-CT — DRV2667 evaluation module with boost, digital front end and internal waveform memory
  • LM48560TLEVAL — High Voltage Class H Ceramic Speaker Driver with Automatic Level Control
Software
Application software & framework
Download
Simulation model

DRV2511Q1 TINA-TI Reference Design

SLOM423.TSC (39 KB) - TINA-TI Reference Design
Download
Simulation model

DRV2511Q1 TINA-TI Spice Model

SLOM424.ZIP (39 KB) - TINA-TI Spice Model
Download
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Package Pins CAD symbols, footprints & 3D models
HTSSOP (DAP) 32 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos