Home Audio, haptics & piezo Audio converters Audio ADCs
Home
Audio, haptics & piezo
Audio converters
Audio ADCs

PCM5140-Q1

ACTIVE

Automotive, quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 120-dB SNR

Order now
Data sheet

PCM5140-Q1

ACTIVE
Data sheet Order now

Product details

Number of ADC channels 4 Sampling rate (max) (kHz) 768 Analog inputs 4 Control interface I2C, SPI Digital audio interface I2S, L, TDM THD+N (dB) -98 ADC SNR (typ) (dB) 120 Rating Automotive Operating temperature range (°C) -40 to 125 Analog outputs 0
Number of ADC channels 4 Sampling rate (max) (kHz) 768 Analog inputs 4 Control interface I2C, SPI Digital audio interface I2S, L, TDM THD+N (dB) -98 ADC SNR (typ) (dB) 120 Rating Automotive Operating temperature range (°C) -40 to 125 Analog outputs 0
VQFN (RGE) 24 16 mm² 4 x 4
  • Multichannel high-performance ADC:
    • 4-channel analog microphones or line-in,
    • 8-channel digital PDM microphones, or
    • Combination of analog and digital microphones
  • ADC line and microphone differential input performance:
    • Dynamic range (DR):
      • 120dB, dynamic range enhancer (DRE) enabled
      • 108dB, DRE disabled
    • THD+N: –98dB
  • ADC channel summing mode, DR performance:
    • 111dB, DRE disabled, 2-channel summing
    • 114dB, DRE disabled, 4-channel summing
  • ADC input voltage:
    • Differential, 2VRMS full-scale inputs
    • Single-ended, 1VRMS full-scale inputs
  • ADC sample rate (fS) = 8kHz to 768kHz
  • Programmable channel settings:
    • Channel gain: 0dB to 42dB, 1dB steps
    • Digital volume control: –100dB to 27dB
    • Gain calibration with 0.1dB resolution
    • Phase calibration with 163ns resolution
  • Programmable microphone bias or supply voltage generation
  • Low-latency signal processing filter selection
  • Programmable HPF and biquad digital filters
  • Automatic gain controller (AGC)
  • I2C or SPI controls
  • Integrated high-performance audio PLL
  • Automatic clock divider setting configurations
  • Audio serial data interface:
    • Format: TDM, I2S, or left-justified (LJ)
    • Word length: 16 bits, 20 bits, 24 bits, or 32 bits
    • Controller or target interface
  • Single-supply operation: 3.3V or 1.8V
  • I/O-supply operation: 3.3V or 1.8V
  • Power consumption for 1.8V AVDD supply:
    • 8.5mW/channel at 16kHz sample rate
    • 9.2mW/channel at 48kHz sample rate
  • Multichannel high-performance ADC:
    • 4-channel analog microphones or line-in,
    • 8-channel digital PDM microphones, or
    • Combination of analog and digital microphones
  • ADC line and microphone differential input performance:
    • Dynamic range (DR):
      • 120dB, dynamic range enhancer (DRE) enabled
      • 108dB, DRE disabled
    • THD+N: –98dB
  • ADC channel summing mode, DR performance:
    • 111dB, DRE disabled, 2-channel summing
    • 114dB, DRE disabled, 4-channel summing
  • ADC input voltage:
    • Differential, 2VRMS full-scale inputs
    • Single-ended, 1VRMS full-scale inputs
  • ADC sample rate (fS) = 8kHz to 768kHz
  • Programmable channel settings:
    • Channel gain: 0dB to 42dB, 1dB steps
    • Digital volume control: –100dB to 27dB
    • Gain calibration with 0.1dB resolution
    • Phase calibration with 163ns resolution
  • Programmable microphone bias or supply voltage generation
  • Low-latency signal processing filter selection
  • Programmable HPF and biquad digital filters
  • Automatic gain controller (AGC)
  • I2C or SPI controls
  • Integrated high-performance audio PLL
  • Automatic clock divider setting configurations
  • Audio serial data interface:
    • Format: TDM, I2S, or left-justified (LJ)
    • Word length: 16 bits, 20 bits, 24 bits, or 32 bits
    • Controller or target interface
  • Single-supply operation: 3.3V or 1.8V
  • I/O-supply operation: 3.3V or 1.8V
  • Power consumption for 1.8V AVDD supply:
    • 8.5mW/channel at 16kHz sample rate
    • 9.2mW/channel at 48kHz sample rate

The PCM5140-Q1 is a Burr-Brown™ high-performance, audio analog-to-digital converter (ADC) that supports simultaneous sampling of up to four analog channelsor eight digital channels for the pulse density modulation (PDM) microphone input. The device supports line and microphone inputs, and allows for both single-ended and differential input configurations. The device integrates programable channel gain, digital volume control, a programmable microphone bias voltage, a phase-locked loop (PLL), a programmable high-pass filter (HPF), biquad filters, low-latency filter modes, and allows for sample rates up to 768kHz, and allows for sample rates up to 192kHz. The device supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with either the I2C or SPI. These integrated high-performance features, along with the ability to be powered from a single-supply of 3.3V or 1.8V, make the device an excellent choice for space-constrained audio systems in far-field microphone recording applications.

The PCM5140-Q1 is specified from –40°C to +125°C, and is offered in a 24-pin VQFN package.

The PCM5140-Q1 is a Burr-Brown™ high-performance, audio analog-to-digital converter (ADC) that supports simultaneous sampling of up to four analog channelsor eight digital channels for the pulse density modulation (PDM) microphone input. The device supports line and microphone inputs, and allows for both single-ended and differential input configurations. The device integrates programable channel gain, digital volume control, a programmable microphone bias voltage, a phase-locked loop (PLL), a programmable high-pass filter (HPF), biquad filters, low-latency filter modes, and allows for sample rates up to 768kHz, and allows for sample rates up to 192kHz. The device supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with either the I2C or SPI. These integrated high-performance features, along with the ability to be powered from a single-supply of 3.3V or 1.8V, make the device an excellent choice for space-constrained audio systems in far-field microphone recording applications.

The PCM5140-Q1 is specified from –40°C to +125°C, and is offered in a 24-pin VQFN package.
filter Find other Audio ADCs
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Same functionality with different pin-out to the compared device
PCM6140-Q1 ACTIVE Automotive, quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 122-dB SNR Higher SNR performance
TLV320ADC5140 ACTIVE Quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 120-dB SNR -40°C to 125°C temperature range without AEC-Q100 qualification

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* Data sheet PCM5140-Q1 Quad-Channel, 768-kHz, Burr-BrownTM Audio ADC datasheet PDF | HTML 26 Mar 2024
Application note TLV320ADCx140/PCMx140-Q1 Programmable Biquad Filter Configuration and Applications (Rev. B) PDF | HTML 12 Dec 2023
Application note Using the Dynamic Range Enhancer in TLV320ADC5140/6140 and PCM5140-Q1/PCM6140-Q1 (Rev. A) PDF | HTML 11 Dec 2023

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

PCMX140Q1EVM-PDK — PCMx140-Q1 evaluation module for quad-channel 768-kHz Burr-Brown™ audio ADCs

The PCMx140EVM-PDK is an evaluation module (EVM) that allows the user to test the capabilities of the PCMx140-Q1 family of devices, which is a quad-channel, high-performance audio analog-to-digital converter (ADC). The PCMx140- Q1 is intended for voice-activated systems, professional microphones, (...)
User guide: PDF | HTML
View Options
Application software & framework

PUREPATHCONSOLE — PurePath™ Console graphical development suite for audio system design and development

PurePath™ Console is a highly integrated and easy-to-use audio development suite designed specifically to simplify the evaluation, configuration and debug process associated with the development of audio products. Watch how easy it is to use the PurePath™ Console 3 software.

PurePath Console’s (...)
Supported products & hardware

Supported products & hardware

Products
Audio CODECs
  • TAC5111 — Low-power mono audio codec with 105dB dynamic range ADC and 114dB dynamic range DAC
  • TAC5111-Q1 — Automotive low-power mono audio codec with 105dB dynamic range ADC, 114dB dynamic range DAC
  • TAC5112 — Low-power stereo audio codec with 105dB dynamic range ADC and 114dB dynamic range DAC
  • TAC5112-Q1 — Automotive low-power stereo audio codec with 105dB dynamic range ADC, 114dB dynamic range DAC
  • TAC5211 — High-performance mono audio codec with 119dB dynamic range ADC and 120dB dynamic range DAC
  • TAC5212 — High-performance stereo audio codec with 119dB dynamic range ADC and 120dB dynamic range DAC
  • TAC5311-Q1 — Automotive mono audio codec with 104dB ADC, 114dB DAC, high-voltage input, mic bias & diagnostics
  • TAC5312-Q1 — Automotive stereo audio codec with 104dB ADC 114dB DAC, high-voltage input, mic bias & diagnostics
  • TAC5412-Q1 — Automotive stereo audio codec with 112dB ADC, 120dB DAC, high-voltage input, mic bias & diagnostics
  • TLV320AIC3268 — TLV320AIC3268 Ultra Low Power Stereo Audio Codec
Audio DACs
  • PCM1690 — 113dB SNR 8-Channel Audio DAC with Differential Outputs
  • PCM5242 — 4.2-VRMS DirectPath™, 32-bit, 384-kHz, 114-dB Audio Stereo DAC
  • TAD5112 — Low-power stereo audio DAC with 110dB dynamic range, and headphone and line driver
  • TAD5112-Q1 — Automotive low-power stereo audio DAC with 110dB dynamic range and headphone & line driver
  • TAD5212 — High-performance stereo audio DAC with 120dB dynamic range, and headphone and line driver
  • TAD5212-Q1 — Automotive high-performance stereo audio DAC with 120dB dynamic range and headphone & line driver
Audio ADCs
  • PCM1841-Q1 — Automotive, quad-channel 32-bit 192-kHz audio analog-to-digital converter (ADC)
  • PCM3120-Q1 — Automotive, stereo, 106-dB SNR, 768-kHz, low-power software-controlled audio ADC
  • PCM3140-Q1 — Automotive, quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 106-dB SNR
  • PCM5120-Q1 — Automotive, stereo, 120-dB SNR, 768-kHz, low-power software-controlled audio ADC
  • PCM5140-Q1 — Automotive, quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 120-dB SNR
  • PCM6020-Q1 — Automotive 2-channel audio ADC with integrated microphone bias, boost and input diagnostics
  • PCM6120-Q1 — Automotive, stereo, 123-dB SNR, 768-kHz, low-power software-controlled audio ADC
  • PCM6140-Q1 — Automotive, quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 122-dB SNR
  • PCM6260-Q1 — Automotive 6-ch audio ADC with integrated programmable mic bias, boost and input diagnostics
  • PCM6340-Q1 — Automotive 4-ch audio ADC with integrated microphone bias and input diagnostics
  • PCMD3140 — Four-channel PDM-input to TDM- or I²S-output converter
  • PCMD3140-Q1 — Automotive, 127-dB SNR, 768-kHz, four-channel, PDM-input to TDM- or I²S-output converter
  • PCMD3180 — Eight-channel pulse-density-modulation input to TDM or I²S output converter
  • PCMD3180-Q1 — Automotive, eight-channel pulse-density-modulation input to TDM or I²S output converter
  • TAA3020 — Stereo-channel 768kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 104dB SNR
  • TAA3040 — Quad-channel 768kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 104dB SNR
  • TAA5212 — High-performance stereo audio ADC with 119dB dynamic range and configurable digital filters
  • TAA5412-Q1 — Automotive stereo audio ADC with 112dB dynamic range, high-voltage input, mic bias and diagnostics
  • TLV320ADC3120 — Stereo-channel, 768-kHz, Burr-Brown™ audio analog-to-digital converter (ADC) with 106-dB SNR
  • TLV320ADC3140 — Quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 106-dB SNR
  • TLV320ADC5120 — Stereo-channel, 768-kHz, Burr-Brown™ audio analog-to-digital converter (ADC) with 120-dB SNR
  • TLV320ADC5140 — Quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 120-dB SNR
  • TLV320ADC6120 — Stereo-channel, 768-kHz, Burr-Brown™ audio analog-to-digital converter (ADC) with 123-dB SNR
  • TLV320ADC6140 — Quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 122-dB SNR
General-purpose audio amplifiers
  • TAS2552 — 4-W, digital/analog input smart amp with I/V sense for speaker protection & integ. 8.5-V boost
  • TAS2555 — 5.7-W, digital input smart amp with integrated speaker protection, advanced EQ & 8.5-V Class-H boost
  • TAS2557 — 5.7-W, digital input smart amp with integrated speaker protection, advanced EQ & 8.5-V Class-H boost
  • TAS2559 — 5.7-W, digital input smart amp with integrated speaker protection with stereo processing
  • TAS2560 — 5.6-W digital input smart amp with I/V sense for speaker protection & integrated 8.5-V Class-H boost
  • TAS2563 — 6.1-W, digital input, smart amp & integrated speaker protection, advanced EQ & 11-V Class-H boost
  • TAS5731 — 20-W stereo, 41-W mono, 8- to 21.5-V, digital input open loop Class-D audio amplifier w/ 2.1 support
  • TAS5760MD — 55-W stereo, 114-W mono, 4.5- to 26.4-V, digital input Class-D audio amplifier w/ integrated HP
Automotive audio amplifiers
  • TAS5760M-Q1 — Automotive, 25-W, 2-ch, 4.5- to 26.4-V supply digital input Class-D audio amplifier
  • TAS6422-Q1 — Automotive, 75-W, 2-MHz, 2-ch 4.5- to 26.4-V digital input Class-D audio amplifier w/ load dump
  • TAS6424-Q1 — Automotive, 75-W, 2-MHz, 4-ch, 4.5- to 26.4-V digital input Class-D audio amplifier
  • TAS6424E-Q1 — Automotive, 75-W, 2-MHz, quad-channel, 4.5- to 26.4-V digital input Class-D audio amplifier
  • TAS6424L-Q1 — Automotive, 27-W, 2-MHz, 4-ch 4.5- to 18-V digital input Class-D audio amplifier w/ load dump
  • TPA6404-Q1 — Automotive, 45-W, 2-MHz, 4-ch 4.5- to 18-V supply analog input Class-D audio amplifier w/ load dump
  • TAS5411-Q1 — Automotive, 8W, 4.5 to 18V, analog-input mono Class-D audio amplifier
  • TAS5421-Q1 — Automotive, 22W, 4.5 to 18V, analog-input mono Class-D audio amplifier
  • TAS5431-Q1 — Automotive, 8W, 4.5 to 18V analog-input mono Class-D audio amplifier
  • TAS5441-Q1 — Automotive, 22W, 4.5 to 18V analog-input mono Class-D audio amplifier
  • TAS6421-Q1 — Automotive, 75-W, 2-MHz, 1-ch 4.5- to 26.4-V digital input Class-D audio amplifier w/ load dump
  • TAS6422E-Q1 — Automotive 75-W, 2-MHz, 2-channel, 4.5-V to 26.4-V digital input Class-D audio amplifier
  • TAS6424M-Q1 — Automotive, 45-W, 2-MHz, 4-ch 4.5- to 18-V digital input Class-D audio amplifier w/ load dump
  • TAS6424MS-Q1 — Automotive 45-W, 2-MHz, 4-channel, 4.5- to 18-V digital input Class-D audio amplifier
  • TAS6424R-Q1 — Automotive, 75-W, 2-MHz, quad-channel, 4.5- to 26.4-V digital input Class-D audio amplifier
  • TAS6511-Q1 — Automotive, 45W, 2MHz, 1-channel digital input Class-D audio amplifier with current sense
  • TAS6584-Q1 — Automotive 45-V, 10-A digital input, four-channel Class-D audio amplifier with current sense
  • TAS6684-Q1 — Automotive, 45V, 13A, digital input, four-channel Class-D audio amplifier with current sense
  • TAS6754-Q1 — Automotive, 19V, digital-input four-channel Class-D audio amplifier with 1L modulation
  • TPA6304-Q1 — 45-W, 2.1-MHz analog input 4-channel automotive Class-D Burr-Brown™ audio amplifier
Speaker, TV & soundbar audio amplifiers
  • TAS2110 — 6.1W mono digital input Class-D speaker amp with integrated 11V Class-H boost
  • TAS2764 — 13-W, digital input, 2.3-V to 16-V smart amp I/V sense for speaker protection and multi-level supply
  • TAS2780 — 25-W, digital input, 4.5-V to 24-V 6-A peak smart amp with I/V sense for speaker protection
  • TAS5729MD — 12-W stereo, 24-W mono, 4.5- to 26.4-V supply, digital input open loop Class-D audio amplifier w/ HP
  • TAS5733L — 10-W stereo, 20-W mono, 8- to 16.5-V, digital input open loop Class-D audio amplifier w/ EQ & AGL
  • TAS5751M — 25-W stereo, 40-W mono, 8- to 26.4-V, digital input open loop Class-D audio amplifier w/ EQ & AGL
  • TAS5754M — 40-W stereo, 61-W mono, 4.5- to 26.4-V supply, digital input Class-D audio amplifier
  • TAS5756M — 30-W stereo, 40-W mono, 4.5- to 26.4-V supply, digital input Class-D audio amplifier
  • TAS5760L — 21-W stereo, 42-W mono, 4.5- to 16.4-V supply, digital input Class-D audio amplifier
  • TAS5760LD — 21-W stereo, 42-W mono, 4.5- to 16.4-V, digital input Class-D audio amplifier w/ integrated HP
  • TAS5760M — 55-W stereo, 114-W mono, 4.5- to 26.4-V supply, digital input Class-D audio amplifier
  • TAS5780M — 20-W stereo, 40-W mono, 4.5- to 26.4-V supply, digital input Class-D audio amplifier
  • TAS5782M — 20-W stereo, 40-W mono, 4.5- to 26.4-V, digital input Class-D Smart Audio Amplifier w/ processing
  • TAS5805M — 23-W stereo, 45-W mono, 4.5- to 26.4-V supply, digital input Class-D audio amplifier w/ processing
  • TAS5822M — 35-W, inductor-less, digital input, stereo, closed-loop Class-D amp with 96-kHz enhanced process
  • TAS5825M — 38-W stereo, 65-W mono, 4.5- to 26-V, digital input Class-D Smart Audio Amplifier w/ 192kHz arch
  • TAS5825P — 4.5V to 26.4V Class-H control digital-in Class-D audio amp with ultra-low idle & superior efficiency
Specialty audio amplifiers
  • TPA6166A2 — 43-mW, stereo, analog input headphone amplifier with accessory detection
PC & notebook audio amplifiers
  • TAS2770 — 20-W, digital input, 4.5- to 18-V smart amp with I/V sense for speaker protection
  • TAS2781 — 25 W, 4.5-V to 23-V, digital-input integrated-audio-processing speaker-protection class-D amplifier
  • TAS5766M — 50-W stereo, 100-W mono, 4.5- to 26.4-V supply, digital input Class-D Smart Audio Amplifier
Mobile phone tablet wearable audio amplifiers
  • TAS2562 — 6.1-W, digital input smart amp with I/V sense for speaker protection & integrated 11-V Class-H boost
  • TAS2564 — 7-W, digital input smart amp with I/V sense for speaker protection & integrated 13-V Class-H boost
  • TAS2572 — 6.6W digital-input smart amplifier with I/V sense and integrated 13V Class-H boost
Piezo drivers
  • DRV5825P — 4.5-V to 26.4-V, 7.5-A stereo, 15-A mono, digital input, Piezo driver with smart I/V protection
Hardware development
Evaluation board
  • ADC3120EVM-PDK — TLV320ADC3120 evaluation module for stereo-channel, 768-kHz, Burr-Brown™ audio ADC with 106-dB SNR
  • ADC3120Q1EVM-PDK — PCM3120-Q1 evaluation module for stereo, 768-kHz, audio analog-to-digital converter with 106-dB SNR
  • ADC5120EVM-PDK — TLV320ADC5120 evaluation module for stereo-channel, 768-kHz, Burr-Brown™ audio ADC with 120-dB SNR
  • ADC5120Q1EVM-PDK — PCM5120-Q1 evaluation module for stereo, 768-kHz, audio analog-to-digital converter with 120-dB SNR
  • ADC6120EVM-PDK — TLV320ADC6120 evaluation module for stereo-channel, 768-kHz, Burr-Brown™ audio ADC with 123-dB SNR
  • ADC6120Q1EVM-PDK — PCM6120-Q1 evaluation module for stereo, 768-kHz, audio analog-to-digital converter with 123-dB SNR
  • PCM1809EVM — PCM1809 evaluation module
  • PCMD3140Q1EVM-PDK — PCMD3140-Q1 evaluation module for four-channel, PDM-input to TDM- or I²S-output converter
  • PP-SALB2-EVM — PP-SALB2-EVM Smart amp speaker characterization board evaluation module (Learning Board 2)
  • TAA3040EVM-PDK — TAA3040 evaluation module
  • TAA5212EVM-K — TAA5212 evaluation module
  • TAC5112EVM-K — TAC5112 evaluation module
  • TAC5212EVM-K — TAC5212 evaluation module
  • TAD5212EVM-K — TAD5212 evaluation module
  • TAS2555YZEVM — TAS2555 5.7W Class-D Audio Amplifier Evaluation Module
  • TAS2557EVM — TAS2557 5.7-W Class-D Audio Amplifier Evaluation Module with Class-H Boost and Speaker Sense
  • TAS2559EVM — TAS2559 5.7-W Class-D Audio Amplifier Evaluation Module
  • TAS2560EVM — TAS2560 5.6W Class-D Audio Amplifier Evaluation Module
  • TAS2770EVM — TAS2770EVM Mono, Digital Input, Class-D, IV Sense Audio Amplifier Evaluation Module for QFN Package
  • TAS2781EVM — TAS2781 evaluation module for mono Class-D audio amplifier with digital input and speaker IV sense
  • TAS3251EVM — TAS3251 175W Stereo / 350W Mono Ultra-HD Digital-In Class-D Evaluation Module
  • TAS5721EVM — TAS5721 Evaluation Module
  • TAS5733LEVM — TAS5733L Digital Input, Open-Loop Class-D Audio Amplifier Evaluation Module
  • TAS5751MEVM — TAS5751M Digital Input, Open Loop Class-D Audio Amplifier Evaluation Module
  • TAS5754MDCAEVM — TAS5754M 30-W Digital I2S Input, Closed-Loop Audio Class-D Amplifier Evaluation Module
  • TAS5756MDCAEVM — TAS5756M 30-W Digital I2S Input, Closed-Loop Audio Class-D Amplifier Evaluation Module
  • TAS5760XXEVM — TAS5760M/MD/L/LD Evaluation Module
  • TAS5782MEVM — TAS5782M Digital Input Closed-Loop Class-D Audio Amplifier with 96-kHz Processing Evaluation Module
  • TAS5805MEVM — TAS5805M Digital Input Stereo Closed-Loop Class-D Audio Amplifier with Enhanced Processing EVM
  • TAS5825MEVM — Digital-input closed-loop class-D audio amp with 96kHz/192kHz extended processing evaluation module
  • TAS5411Q1EVM — TAS5411-Q1 8-W Automotive Mono Analog Input Class-D Audio Amp Evaluation Module
  • TAS5421EVM — TAS5421EVM audio amplifier eval board for eCall, telematics, instrument cluster and infotainment
  • TAS5431Q1EVM — TAS5431-Q1 8-W automotive mono analog input class-D audio amp evaluation module
  • TAS5441Q1EVM — Audio amplifier evaluation module for eCall, telematics, instrument cluster and infotainment
  • TAS6421Q1EVM — TAS6421-Q1 2.1MHz 1Ch digital input Class-D audio amplifier w/I2C diagnostics evaluation module
  • TAS6422EQ1EVM — 2-MHz, 2-channel digital input Class-D audio amplifier with I2C diagnostics evaluation module
  • TAS6422Q1EVM — TAS6422Q1 2.1MHz 2Ch Digital Input Class-D Audio Amplifier w/I2C Diagnostics Evaluation Module
  • TAS6424EQ1EVM — TAS6424E-Q1 evaluation module 75-W, 2-MHz, quad-channel digital input Class-D audio amplifier
  • TAS6424LQ1EVM — TAS6424LQ1 2.1MHz 4Ch Digital Input Class-D Audio Amplifier w/I2C Diagnostics Evaluation Module
  • TAS6424MSQ1EVM — 2.1-MHz, 4-ch digital input Class-D audio amplifier with I2C diagnostics evaluation module
  • TAS6511Q1EVM — TAS6511-Q1 evaluation module
  • TAS6584Q1EVM — TAS6584-Q1 evaluation module for 45-V, 10-A digital input, four-channel Class-D audio amp
  • TAS6684Q1EVM — TAS6684-Q1 evaluation module
  • TAS6754Q1EVM — TAS6754-Q1 evaluation module
  • TPA6304Q1EVM — 2.1-MHz analog input 4-channel automotive Class-D audio amplifier evaluation module
  • TPA6404Q1EVM — TPA6404-Q1 50-W, 2-MHz Analog Input 4-Channel Automotive Class-D Audio Amplifier Evaluation Module
Development kit
Request
Design tool

ADCX140EVM-SW — Evaluation software for ADC3140EVM-PDK, ADC5140EVM-PDK and ADC6140EVM-PDK

Evaluation software for ADC3140EVM-PDK, ADC5140EVM-PDK and ADC6140EVM-PDK
Supported products & hardware

Supported products & hardware

Products
Audio ADCs
  • PCMD3180 — Eight-channel pulse-density-modulation input to TDM or I²S output converter
  • TLV320ADC6140 — Quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 122-dB SNR
  • TLV320ADC5140 — Quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 120-dB SNR
  • TLV320ADC3140 — Quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 106-dB SNR
  • PCM3140-Q1 — Automotive, quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 106-dB SNR
  • PCM5140-Q1 — Automotive, quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 120-dB SNR
  • PCM6140-Q1 — Automotive, quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 122-dB SNR
Hardware development
Evaluation board
  • ADC5140EVM-PDK — TLV320ADC5140 quad-channel 768-kHz Burr-Brown™ audio ADC evaluation module
  • ADC6140EVM-PDK — TLV320ADC6140 quad-channel 768-kHz Burr-Brown™ audio ADC evaluation module
Request
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Package Pins CAD symbols, footprints & 3D models
VQFN (RGE) 24 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos