Home Amplifiers Operational amplifiers (op amps) Precision op amps (Vos<1mV)
Home
Amplifiers
Operational amplifiers (op amps)
Precision op amps (Vos<1mV)

TLC27M7

ACTIVE

Dual, precision single supply low-power operational amplifier

Order now
Data sheet

A newer version of this product is available

open-in-new Compare alternates
Same functionality with different pin-out to the compared device
TLV9102 ACTIVE Dual, 16-V, 1.1-MHz, low-power operational amplifier Rail-to-rail I/O, higher GBW (1.1 MHz), faster slew rate (4.5 V/us), lower noise (30 nV/√Hz), higher output current (80 mA), wider temp range (-40 to 125)

TLC27M7

ACTIVE
Data sheet Order now

Product details

Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 16 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 3 Vos (offset voltage at 25°C) (max) (mV) 0.5 Offset drift (typ) (µV/°C) 1.7 Input bias current (max) (pA) 60 GBW (typ) (MHz) 0.635 Slew rate (typ) (V/µs) 0.46 Rail-to-rail In to V- Iq per channel (typ) (mA) 0.105 Vn at 1 kHz (typ) (nV√Hz) 32 CMRR (typ) (dB) 91 Rating Catalog Operating temperature range (°C) -40 to 85 Iout (typ) (A) 0.008 Architecture CMOS Input common mode headroom (to negative supply) (typ) (V) -0.3 Input common mode headroom (to positive supply) (typ) (V) -0.8 Output swing headroom (to negative supply) (typ) (V) 0 Output swing headroom (to positive supply) (typ) (V) -1.1
Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 16 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 3 Vos (offset voltage at 25°C) (max) (mV) 0.5 Offset drift (typ) (µV/°C) 1.7 Input bias current (max) (pA) 60 GBW (typ) (MHz) 0.635 Slew rate (typ) (V/µs) 0.46 Rail-to-rail In to V- Iq per channel (typ) (mA) 0.105 Vn at 1 kHz (typ) (nV√Hz) 32 CMRR (typ) (dB) 91 Rating Catalog Operating temperature range (°C) -40 to 85 Iout (typ) (A) 0.008 Architecture CMOS Input common mode headroom (to negative supply) (typ) (V) -0.3 Input common mode headroom (to positive supply) (typ) (V) -0.8 Output swing headroom (to negative supply) (typ) (V) 0 Output swing headroom (to positive supply) (typ) (V) -1.1
PDIP (P) 8 92.5083 mm² 9.81 x 9.43 SOIC (D) 8 29.4 mm² 4.9 x 6 SOP (PS) 8 48.36 mm² 6.2 x 7.8
  • Trimmed Offset Voltage:
    • TLC27M7...500 µV Max at 25°C,
      VDD = 5 V
  • Input Offset Voltage Drift...Typically
    0.1 µV/Month, Including the First 30 Days
  • Wide Range of Supply Voltages Over
    Specified Temperature Ranges:
    • 0°C to 70°C...3 V to 16 V
    • –40°C to 85°C...4 V to 16 V
    • –55°C to 125°C...4 V to 16 V
  • Single-Supply Operation
  • Common-Mode Input Voltage Range Extends Below
    the Negative Rail (C-Suffix, I-Suffix Types)
  • Low Noise...Typically 32 nV/ Hz at f = 1 kHz
  • Low Power...Typically 2.1 mW at 25°C, VDD = 5 V
  • Output Voltage Range Includes Negative Rail
  • High Input impedance...1012 Typ
  • ESD-Protection Circuitry
  • Small-Outline Package Option Also Available in Tape and Reel
  • Designed-In Latch-Up Immunity

LinCMOS is a trademark of Texas Instruments Incorporated.
All other trademarks are the property of their respective owners.
  • Trimmed Offset Voltage:
    • TLC27M7...500 µV Max at 25°C,
      VDD = 5 V
  • Input Offset Voltage Drift...Typically
    0.1 µV/Month, Including the First 30 Days
  • Wide Range of Supply Voltages Over
    Specified Temperature Ranges:
    • 0°C to 70°C...3 V to 16 V
    • –40°C to 85°C...4 V to 16 V
    • –55°C to 125°C...4 V to 16 V
  • Single-Supply Operation
  • Common-Mode Input Voltage Range Extends Below
    the Negative Rail (C-Suffix, I-Suffix Types)
  • Low Noise...Typically 32 nV/ Hz at f = 1 kHz
  • Low Power...Typically 2.1 mW at 25°C, VDD = 5 V
  • Output Voltage Range Includes Negative Rail
  • High Input impedance...1012 Typ
  • ESD-Protection Circuitry
  • Small-Outline Package Option Also Available in Tape and Reel
  • Designed-In Latch-Up Immunity

LinCMOS is a trademark of Texas Instruments Incorporated.
All other trademarks are the property of their respective owners.

The TLC27M2 and TLC27M7 dual operational amplifiers combine a wide range of input offset voltage grades with low offset voltage drift, high input impedance, low noise, and speeds approaching that of general-purpose bipolar devices.These devices use Texas Instruments silicon-gate LinCMOS technology, which provides offset voltage stability far exceeding the stability available with conventional metal-gate processes.

The extremely high input impedance, low bias currents, and high slew rates make these cost-effective devices ideal for applications which have previously been reserved for general-purpose bipolar products, but with only a fraction of the power consumption. Four offset voltage grades are available (C-suffix and I-suffix types), ranging from the low-cost TLC27M2 (10 mV) to the high-precision TLC27M7 (500 µV). These advantages, in combination with good common-mode rejection and supply voltage rejection, make these devices a good choice for new state-of-the-art designs as well as for upgrading existing designs.

In general, many features associated with bipolar technology are available on LinCMOS operational amplifiers, without the power penalties of bipolar technology. General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are easily designed with the TLC27M2 and TLC27M7. The devices also exhibit low voltage single-supply operation, making them ideally suited for remote and inaccessible battery-powered applications. The common-mode input voltage range includes the negative rail.

A wide range of packaging options is available, including small-outline and chip-carrier versions for high-density system applications.

The device inputs and outputs are designed to withstand –100-mA surge currents without sustaining latch-up.

The TLC27M2 and TLC27M7 incorporate internal ESD-protection circuits that prevent functional failures at voltages up to 2000 V as tested under MIL-STD-883C, Method 3015.2; however, care should be exercised in handling these devices as exposure to ESD may result in the degradation of the device parametric performance.

The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized for operation from –40°C to 85°C. The M-suffix devices are characterized for operation over the full military temperature range of –55°C to 125°C.

The TLC27M2 and TLC27M7 dual operational amplifiers combine a wide range of input offset voltage grades with low offset voltage drift, high input impedance, low noise, and speeds approaching that of general-purpose bipolar devices.These devices use Texas Instruments silicon-gate LinCMOS technology, which provides offset voltage stability far exceeding the stability available with conventional metal-gate processes.

The extremely high input impedance, low bias currents, and high slew rates make these cost-effective devices ideal for applications which have previously been reserved for general-purpose bipolar products, but with only a fraction of the power consumption. Four offset voltage grades are available (C-suffix and I-suffix types), ranging from the low-cost TLC27M2 (10 mV) to the high-precision TLC27M7 (500 µV). These advantages, in combination with good common-mode rejection and supply voltage rejection, make these devices a good choice for new state-of-the-art designs as well as for upgrading existing designs.

In general, many features associated with bipolar technology are available on LinCMOS operational amplifiers, without the power penalties of bipolar technology. General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are easily designed with the TLC27M2 and TLC27M7. The devices also exhibit low voltage single-supply operation, making them ideally suited for remote and inaccessible battery-powered applications. The common-mode input voltage range includes the negative rail.

A wide range of packaging options is available, including small-outline and chip-carrier versions for high-density system applications.

The device inputs and outputs are designed to withstand –100-mA surge currents without sustaining latch-up.

The TLC27M2 and TLC27M7 incorporate internal ESD-protection circuits that prevent functional failures at voltages up to 2000 V as tested under MIL-STD-883C, Method 3015.2; however, care should be exercised in handling these devices as exposure to ESD may result in the degradation of the device parametric performance.

The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized for operation from –40°C to 85°C. The M-suffix devices are characterized for operation over the full military temperature range of –55°C to 125°C.
filter Find other Precision op amps (Vos<1mV)
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 2
Type Title Date
* Data sheet LinCMOS Precision Dual Operational Amplifiers datasheet (Rev. E) 24 Aug 2008
E-book The Signal e-book: A compendium of blog posts on op amp design topics 28 Mar 2017

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

AMP-PDK-EVM — Amplifier performance development kit evaluation module

The amplifier performance development kit (PDK) is an evaluation module (EVM) kit to test common operational amplifier (op amp) parameters and is compatible with most op amps and comparators. The EVM kit offers a main board with several socketed daughtercard options to fit package needs, allowing (...)

User guide: PDF | HTML
View Options
Evaluation board

DIP-ADAPTER-EVM — DIP adapter evaluation module

Speed up your op amp prototyping and testing with the DIP adapter evaluation module (DIP-ADAPTER-EVM), which provides a fast, easy and inexpensive way to interface with small surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them (...)

User guide: PDF
Not available on TI.com
Evaluation board

DIYAMP-EVM — Universal do-it-yourself (DIY) amplifier circuit evaluation module

The DIYAMP-EVM is an evaluation module (EVM) family that provides engineers and do it yourselfers (DIYers) with real-world amplifier circuits, enabling you to quickly evaluate design concepts and verify simulations. It is available in three industry-standard packages (SC70, SOT-23 and SOIC) (...)

User guide: PDF | HTML
View Options
Simulation model

TLC27M7_9 PSpice 10-V Supply Voltage Model (Rev. B)

SLOJ102B.ZIP (18 KB) - PSpice Model
Download
Simulation model

TLC27M7_9 PSpice 5-V Supply Voltage Model (Rev. A)

SLOM502A.ZIP (18 KB) - PSpice Model
Download
Calculation tool

ANALOG-ENGINEER-CALC — Analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
View Options
Calculation tool

OPAMP-NOISECALC — Noise Calculator

This folder contains three tools to help in understandning and managing noise in cicuits. The included tools are:

  • A noise generator tool - This is a Lab View 4-Run Time executable that generates Gaussian white noise, uniform white noise, 1/f noise, short noise, and 60Hz line noise. Temporal data, (...)
Supported products & hardware

Supported products & hardware

Products
LCD & OLED display power & drivers
  • BUF20800-Q1 — Automotive, 18-CH Gamma Voltage Generator with Two Programmable VCOM Channels
General-purpose op amps
  • TLE2027-EP — Enhanced Product Excalibur Low-Noise High-Speed Precision Operational Amplifier
  • TLE2142A — Excalibur Low-Noise High-Speed Precision Dual Operational Amplifier
  • TLE2142AM — High Speed High Drive Precision Dual Operational Amplifier
  • TLE2142AM-D — High speed high drive single precision operational amplifier
  • TLE2142M-D — High speed high drive dual operational amplifier
Precision op amps (Vos<1mV)
  • ICL7652 — High Precision , 5-µV offset, Chopper-Stabilized Operational Amplifier
  • INA1620 — High-fidelity audio operational amplifier with integrated thin-film resistors and EMI filtering
  • LMC6061 — Precision CMOS Single Micropower Operational Amplifier
  • LMC6062 — Precision CMOS Dual Micropower Operational Amplifier
  • LMC6064 — Precision CMOS Quad Micropower Operational Amplifier
  • LMC6081 — Precision CMOS Single Operational Amplifier
  • LMC6081-MIL — Precision CMOS Single Operational Amplifier
  • LMC6082 — Precision CMOS Dual Operational Amplifier
  • LMC6084 — Precision CMOS Quad Operational Amplifier
  • LMC6462 — Dual Micropower, Rail-to-Rail Input and Output CMOS Operational Amplifier
  • LMC6464 — Quad Micropower, Rail-to-Rail Input and Output CMOS Operational Amplifier
  • LMC6464QML — Quad Micropower, Rail-to-Rail Input and Output CMOS Operational Amplifier
  • LMC6482 — Ultra-low Bias Current, Precision CMOS Rail-to-Rail Input and Output Dual Operational Amplifier
  • LMC6482QML — Ultra-low Bias Current, Precision CMOS Rail-to-Rail Input and Output Operational Amplifier
  • LMC6484 — Ultra-low Bias Current, Precision CMOS Rail-to-Rail Input and Output Quad Operational Amplifier
  • LMC6484QML — Ultra-low Bias Current, Precision CMOS Rail-to-Rail Input and Output Operational Amplifier
  • LMP2011 — Single, High Precision, Rail-to-Rail Output Operational Amplifier
  • LMP2012 — Dual, High Precision, Rail-to-Rail Output Operational Amplifier
  • LMP2012QML-SP — Dual, High Precision, Rail-to-Rail Output Operational Amplifier
  • LMP2014MT — Quad, High Precision, Rail-to-Rail Output Operational Amplifier
  • LMP2021 — Zero Drift, Low Noise, EMI Hardened Single Amplifier
  • LMP2022 — Zero Drift, Low Noise, EMI Hardened Dual Amplifier
  • LMP2231 — Single Micropower, 1.6V, Precision Operational Amplifier with CMOS Inputs
  • LMP2232 — Dual, Micropower, 1.6V, Precision , Operational Amplifier with CMOS Input
  • LMP2234 — Quad Micropower, 1.6V, Precision, Operational Amplifier with CMOS Input
  • LMP7701 — Precision, CMOS Input, RRIO, Wide Supply Range Single Amplifier
  • LMP7702 — Precision, CMOS Input, RRIO, Wide Supply Range Dual Amplifier
  • LMP7704 — Precision, CMOS Input, RRIO, Wide Supply Range Quad Amplifier
  • LMP7704-SP — Radiation-hardness-assured (RHA), precision low-input-bias wide-supply-range amplifier with RRIO
  • LMP7707 — Precision, CMOS Input, RRIO, Wide Supply Range Decompensated Single Amplifier
  • LMP7708 — Precision, CMOS Input, RRIO, Wide Supply Range Decompensated Dual Amplifier
  • LMP7709 — Precision, CMOS Input, RRIO, Wide Supply Range Decompensated Quad Amplifier
  • LMP7711 — Single precision, 17-MHz, low-noise, low bias current, CMOS input amplifier with shutdown
  • LMP7712 — Dual precision, 17-MHz, low-noise, low bias current, CMOS input amplifier with shutdown
  • LMP7715 — Single precision, 17-MHz, low-noise, low bias current, CMOS input amplifier
  • LMP7716 — Dual precision, 17-MHz, low-noise, low bias current, CMOS input amplifier
  • LMP7716-Q1 — Automotive, Dual Precision, 17MHz, Low Noise, CMOS Input Amplifier
  • LMP7716Q — LMP7715/LMP7716/LMP7716Q Single and Dual Precision, 17 MHz, Low Noise, CMOS Inpu
  • LMP7721 — 3 Femtoampere Input Bias Current Precision Amplifier
  • LMP7731 — Single 2.9 nV/sqrt(Hz) Low Noise, Precision, RRIO Amplifier
  • LMP7732 — Dual 2.9 nV/sqrt(Hz) Low Noise, Precision, RRIO Amplifier
  • LMV2011 — High Precision, Rail-to-Rail Output Operational Amplifier
  • LMV641 — 10 MHz, 12V, Low Power Amplifier
  • LMV771 — Single, Low Offset, Low Noise, RRO Operational Amplifiers
  • LMV772 — Dual, Low Offset, Low Noise, RRO Operational Amplifiers
  • LMV772-Q1 — Automotive, Low Offset, Low Noise, RRO Operational Amplifiers
  • LMV774 — Quad, Low Offset, Low Noise, RRO Operational Amplifiers
  • LMV841 — Single CMOS Input, RRIO, Wide Supply Range Operational Amplifiers
  • LMV841-Q1 — Automotive, CMOS Input, RRIO, Wide Supply Range Operational Amplifiers
  • LMV842 — Dual CMOS Input, RRIO, Wide Supply Range Operational Amplifiers
  • LMV842-Q1 — Automotive, Dual CMOS Input, RRIO, Wide Supply Range Quad Operational Amplifiers
  • LMV844 — Quad CMOS Input, RRIO, Wide Supply Range Operational Amplifiers
  • LMV844-Q1 — Automotive, Quad CMOS Input, RRIO, Wide Supply Range Quad Operational Amplifiers
  • LPV811 — Single Channel 450nA Precision Nanopower Operational Amplifier
  • LPV812 — Dual Channel 425nA Precision Nanopower Operational Amplifiers
  • LPV821 — 650nA, Precision Zero-Drift Nanopower Amplifier
  • LT1013 — Low Power, 4V-44V wide supply range, dual precision operational amplifier
  • LT1013D — Low power, 5V - 44V wide supply range, dual precision operational amplifier
  • LT1013M — Dual Precision Operational Amplifier
  • LT1014 — Low Power, 5V-44V wide supply range, quad precision operational amplifier
  • LT1014-MIL — Quad Precision Operational Amplifier
  • LT1014A — Quad Precision Operational Amplifiers
  • LT1014D — Low Power, 5V-44V wide supply range, quad operational amplifier
  • LT1014D-EP — Enhanced Product Quad Precision Operational Amplifier
  • OP07 — Low-offset voltage, single operational amplifier with external input offset voltage adjustment
  • OP27 — Low-Noise Precision High-Speed Operational Amplifier
  • OPA130 — Single, 1-MHz, 20-pA bias current, 530-µA power, FET operational amplifier
  • OPA131 — Single, 4-MHz, 50-pA bias current, 750-µA power, FET operational amplifier
  • OPA140 — Single-channel, 11-MHz, low-noise 36-V JFET precision operational amplifier with rail-to-rail output
  • OPA140A-DIE — 11-MHz, low-noise 36-V JFET precision operational amplifier with rail-to-rail output
  • OPA145 — Single, 5.5-MHz, high slew rate, low-noise, low-power, RRO precision JFET operational amplifier
  • OPA177 — Precision Operational Amplifier
  • OPA180 — 0.1-μV/°C Drift, Low-Noise, Rail-to-Rail Output, 36-V, Zero-Drift Operational Amplifier
  • OPA180-Q1 — Automotive-Qualified 0.1μV/°C Drift, Low-Noise, RRO, 36V, Zero-Drift Op Amp
  • OPA187 — Zero drift (10µV, 0.001µV/°C), MUX-friendly, low power, RRO, CMOS precision op amp
  • OPA188 — Precision, Low-Noise, Rail-to-Rail Output, 36V Zero-Drift Operational Amplifier
  • OPA188-Q1 — Automotive-Qualified Precision, Low-Noise, RRO, 36V, Zero-Drift Operational Amplifier
  • OPA189 — Single, 14-MHz, mux-friendly, low-noise, zero-drift, RRO, CMOS precision operational amplifier
  • OPA191 — Low-Power, Precision, 36-V, e-trim CMOS Amplifier
  • OPA192 — High-Voltage, Rail-to-Rail Input/Output, 5µV, 0.2µV/˚C, Precision Operational Amplifier
  • OPA192-Q1 — Automotive High-Voltage Rail-to-Rail Input/Output Precision Op Amp E-Trim™ Series
  • OPA196 — Single, 36-V, low power, all-purpose amplifier with mux-friendly input
  • OPA197 — Single, 36-V, precision, rail-to-rail input output, low offset voltage op amp
  • OPA197-Q1 — Single, automotive 36-V, precision, rail-to-rail input output, low offset voltage op amp
  • OPA202 — Low-noise (0.2 µVPP, 9 nV/√Hz) heavy-capacitive-drive (25 nF) super-beta precision op amp
  • OPA206 — Low-power (240 µA) low-noise (8 nV/√Hz) precision e-trim™ op amp with super-beta inputs and OVP
  • OPA207 — Low power (350µA), low noise (7.5nV/√Hz), high precision (100µV, 0.2µV/⁰C), bipolar RRO op amp
  • OPA209 — Single, 2.2-nV/rtHz, 18-MHz, precision, RRO, 36-V operational amplifier
  • OPA210 — 2.2-nV/√Hz, low-power, 36-V operational amplifier
  • OPA211 — 1.1nV/rtHz Noise, Low-Power, Precision Operational Amplifier
  • OPA211-EP — Enhanced Product 1.1nV/rtHz Noise, Low Power, Precision Operational Amplifier
  • OPA211-HT — High Temperature 1.1nV/rtHz Noise, Low Power, Precision Operational Amplifier
  • OPA2130 — Dual, 1-MHz, 20-pA bias current, 530-µA power, FET operational amplifier
  • OPA2131 — Dual, 4-MHz, 50-pA bias current, 750-µA power, FET operational amplifier
  • OPA2140 — Dual-channel, 11-MHz, low-noise 36-V JFET precision operational amplifier with rail-to-rail output
  • OPA2145 — Dual, 5.5-MHz, high slew rate, low-noise, low-power, RRO precision JFET operational amplifier
  • OPA2156 — Low noise (3-nV/√Hz @10kHz), high speed (25-MHz, 40-V/µs), CMOS precision RRIO dual op amp
  • OPA2180 — 0.1 uV/°C DRIFT, Low Noise, Rail-to-Rail Output, 36V Zero-Drift Op Amp
  • OPA2180-Q1 — Automotive-Qualified 0.1 uV/°C Drift, Low Noise, RRO, 36V, Zero-Drift Op Amp
  • OPA2182 — Industry’s lowest offset drift (0.012 uV/˚C, max), 5.7 nV/rtHz, MUX-friendly 36V op amp
  • OPA2187 — Zero-drift (10µV, 0.001µV/C˚), MUX-friendly, low power, RRO, CMOS precision op amp (dual)
  • OPA2188 — 0.03µV/°C, 6µV Vos, Low Noise, Rail-to-Rail Output, 36V Zero-Drift Operational Amplifier
  • OPA2188-Q1 — Automotive-Qualified 0.03µV/°C Drift, 6µV Vos, Low-Noise, RRO, 36V, Zero-Drift Op Amp
  • OPA2189 — Dual, 14-MHz, MUX-friendly, low-noise, zero-drift, RRO, CMOS precision operational amplifier
  • OPA2191 — Low-power, 36-V, CMOS precision e-trim™ operational amplifier
  • OPA2192 — 36-V, Precision, RRIO, Low Offset Voltage, Low Input Bias Current Op Amp With e-trim
  • OPA2192-Q1 — Automotive 36-V, Precision, RRIO, Low Offset Voltage, Low Input Bias Current Op Amp With e-trim
  • OPA2196 — Dual, 36-V, low power, all-purpose amplifier with mux-friendly input
  • OPA2197 — Dual 36-V, precision, rail-to-rail input output, low offset voltage op amp
  • OPA2197-Q1 — Dual automotive 36-V, precision, rail-to-rail input output, low offset voltage op amp
  • OPA2202 — Low-noise (0.2 µVPP, 9 nV/√Hz), heavy-capacitive-drive (25 nF) dual super-beta precision op amp
  • OPA2205 — Dual, rail-to-rail bipolar precision e-trim™ op amp with low input bias current and low noise
  • OPA2206 — OVP ±40-V, low-power, low-noise, precision amplifier with e-trim™ and super beta input transistors
  • OPA2209 — Dual, 2.2-nV/rtHz, 18-MHz, precision, RRO, 36-V operational amplifier
  • OPA2210 — Ultra-low noise (2.2-nV/√Hz), super beta (0.3nA), high precision (5µV, 0.1µV/°C), 36-V, dual op amp
  • OPA2211-EP — 1.1 nV/√Hz Noise, Low Power, Precision Operational Amplifier
  • OPA2211-HT — 1.1nV/rtHz noise, low power, precision op amp
  • OPA2211A — 1.1nV/rtHz Noise, Low Power, Precision Operational Amplifier
  • OPA2227 — Dual high precision, low noise operational amplifiers
  • OPA2227-EP — Enhanced Product High Precision, Low Noise Operational Amplifier
  • OPA2228 — Dual, wide bandwidth, high precision, low noise operational amplifiers
  • OPA2237 — Dual Single-Supply Operational Amplifiers MicroAmplifier™ Series
  • OPA2241 — Dual, 5V single-supply, micro power operational amplifiers
  • OPA2251 — Dual, 15V single-supply, micro power operational amplifiers
  • OPA227 — High Precision, Low Noise Operational Amplifiers
  • OPA2277 — 10µV, 0.1µV/˚C, High-Precision, Low-Power Operational Amplifier
  • OPA2277-EP — Enhanced Product High Precision Operational Amplifier
  • OPA228 — 33-MHz, 3-nV/√Hz noise, high precision operational amplifiers
  • OPA2317 — Dual, Low Offset, Rail-to-Rail I/O Operational Amplifier
  • OPA2317-Q1 — OPAx317-Q1 Low-Offset, Rail-to-Rail I/O Operational Amplifier
  • OPA2320 — Dual, precision, zero-crossover, 20-MHz, 0.9-pA Ib, RRIO, CMOS operational amplifier
  • OPA2320-Q1 — Automotive, dual, precision, zero-crossover, 20-MHz, 0.9-pA Ib, RRIO, CMOS op amp
  • OPA2325 — Dual precision, wide bandwidth, low noise, low power ADC driving op amp with RRIO and zero-crossover
  • OPA2330 — Dual, 1.8-V, 35-µA, micropower, precision, zero drift CMOS op amp
  • OPA2333 — 1.8-V, 17-µA, two-channel, micropower zero-drift CMOS operational amplifier
  • OPA2333-HT — High-temperature, 1.8-V, 17-µA, two-channel, micropower zero-drift CMOS operational amplifier
  • OPA2333-Q1 — Automotive, 1.8-V, 17-µA, two-channel, micropower zero-drift CMOS operational amplifier
  • OPA2333A-EP — Enhanced-product, 1.8-V, 17-µA, two-channel, micropower zero-drift CMOS operational amplifier
  • OPA2333P — 1.8-V, 17-µA, two-channel, micropower zero-drift CMOS operational amplifier with >300-kHz GBW
  • OPA2334 — Dual 0.05uV/C max, single-supply CMOS operational amplifier with shutdown
  • OPA2335 — Dual 0.05uV/C max, single-supply CMOS operational amplifier
  • OPA2335M — 0.05uV/C max, Single-Supply CMOS Operational Amplifier
  • OPA2336 — Single-Supply, MicroPower CMOS Operational Amplifiers MicroAmplifier Series
  • OPA2340 — Dual single-supply, rail-to-rail, low power operational amplifier
  • OPA2350 — Dual single-supply, rail-to-rail, high speed, low-noise operational amplifier
  • OPA2369 — Dual, 1.8-V, 700-nA, zero-crossover rail-to-rail I/O operational amplifier
  • OPA237 — Single-Supply Operational Amplifiers MicroAmplifier™ Series
  • OPA2376 — Dual, precision, low-noise, low quiescent current operational amplifier
  • OPA2376-Q1 — Low Noise, Low Quiescent Current, Precision Operational Amplifier e-trim/trade
  • OPA2377 — Low-Cost, Low Noise, 5MHz CMOS Operational Amplifier
  • OPA2377-Q1 — Automotive-Qualified, Rail-to-Rail In/Out, Low Noise, 5MHz CMOS Operational Amplifier
  • OPA2378 — Dual, low-noise, 900-kHz, RRIO, precision operational amplifier, zero-drift series
  • OPA2381 — Precision, Low Power, Transimpedance Amplifier
  • OPA2383 — Dual, zero-drift, micropower (65μA), high speed-to-power ratio (2.5MHz) RRIO operational amplifier
  • OPA2387 — Ultra-high-precision zero-drift low-input-bias-current operational amplifier
  • OPA2388 — Dual, 10-MHz, CMOS, zero-drift, zero-crossover, true RRIO precision operational amplifier
  • OPA2388-Q1 — Dual, automotive qualified, wide-bandwidth, zero-drift, zero-crossover, precision amplifier
  • OPA2397 — Dual, low-offset (60 µV), low-noise, low-bias-current RRIO e-trim™ operational amplifier
  • OPA241 — Single, 5V single-supply, micro power operational amplifiers
  • OPA251 — Single, 15V single-supply, micro power operational amplifiers
  • OPA27 — Ultra-low-noise (4.5-nV/√Hz), 100-µV offset, unity gain stable precision operational amplifier
  • OPA2727 — e-trim™20MHz, High Precision CMOS Operational Amplifier
  • OPA2734 — Dual 0.05uV/degC (max) single-supply CMOS operational amplifier, zero-drift series with shutdown
  • OPA2735 — Dual 0.05uV/degC (max) single-supply CMOS operational amplifier, zero-drift series
  • OPA277 — Dual, 36-V, 10µV offset, 0.1µV/˚C drift, bipolar, operational amplifier
  • OPA2828 — Dual, high-speed (45 MHz and 150 V/μs), 36-V, low-noise (4 nV/√Hz) RRO JFET operational amplifier
  • OPA317 — Low Offset, Rail-to-Rail I/O Operational Amplifier
  • OPA317-Q1 — Automotive-Qualified Operational Amplifier with Low-Offset, RRIO, and Low Current Consumption
  • OPA320 — Precision, zero-crossover, 20-MHz, 0.9-pA Ib, RRIO, CMOS operational amplifier
  • OPA320-Q1 — Automotive qualified, precision, zero-crossover, 20-MHz, 0.9-pA Ib, RRIO, CMOS operational amplifier
  • OPA325 — Low noise (10nV/rtHz), wide bandwidth (10MHz), low power (0.65mA), zero crossover op amp
  • OPA328 — Precision, zero-crossover, 50μV offset voltage, 40MHz wide-bandwidth RRIO CMOS operational amplifier
  • OPA330 — Single, 1.8-V, 35-µA, micropower, precision, zero drift CMOS op amp
  • OPA333 — Micropower, 1.8-V, 17-µA zero-drift CMOS precision operational amplifier
  • OPA333-Q1 — Automotive, micropower, 1.8-V, 17-µA zero-drift CMOS precision operational amplifier
  • OPA333A-EP — Enhanced-product, micropower, 1.8-V, 17-µA zero-drift CMOS precision operational amplifier
  • OPA334 — Single 0.05uV/C max, single-supply CMOS operational amplifier with shutdown
  • OPA335 — Single 0.05uV/C max, single-supply CMOS operational amplifier
  • OPA336 — Single-Supply, MicroPower CMOS Operational Amplifiers MicroAmplifier™ Series
  • OPA336-EP — Enhanced Product Single-Supply, Micropower Cmos Operational Amplifiers Microamplifier(Tm)
  • OPA340 — Single, single-supply, rail-to-rail, low power operational amplifier
  • OPA340-EP — Enhanced Product Single-Supply, Rail-to-Rail Operational Amplifiers MicroAmplifier™ Series
  • OPA350 — Single, single-supply, rail-to-rail, high speed, low noise operational amplifier
  • OPA369 — Single, 1.8-V, 700-nA, zero-crossover rail-to-rail I/O operational amplifier
  • OPA37 — Ultra-low-noise (4.5-nV/√Hz), 100-µV offset, decompensated precision operational amplifier
  • OPA376 — Precision (0.025mV), low noise (7.5nV/rtHz), low quiescent current (760uA) op amp
  • OPA376-Q1 — Automotive Precision, Low Noise, Low Iq Operational Amplifier
  • OPA377 — Low-cost, low-noise, 5.5-MHz CMOS operational amplifier
  • OPA377-Q1 — Automotive Qualified, Low Noise, Low Voltage, Precision Operational Amplifier
  • OPA378 — Low-noise, 900-kHz, RRIO, precision operational amplifier, zero-drift series
  • OPA381 — Precision, Low Power, High-Speed Transimpedance Amplifier
  • OPA383 — Single, zero-drift, micropower (65μA), high speed-to-power ratio (2.5MHz) RRIO operational amplifier
  • OPA387 — Ultra-high precision (2 µV), zero-drift (0.003 µV/C), low-input-bias-current op amp (single)
  • OPA388 — Single, 10-MHz, CMOS, zero-drift, zero-crossover, true RRIO precision operational amplifier
  • OPA388-Q1 — Automotive qualified, wide bandwidth, zero drift, zero cross over, precision amplifier
  • OPA391 — Micropower, single, high-precision low-bias-current RRIO op amp with high speed-to-power ratio
  • OPA392 — Single, low-offset (10 μV), low-noise (4.4 nV/rtHz @10kHz) femtoamp-bias-current e-trim™ op amp
  • OPA396 — Single, micropower (24 μA), low-offset (100 μV), high speed-to-power ratio RRIO op amp
  • OPA397 — Single, low-offset (60 µV), low-noise, low-bias-current RRIO e-trim™ operational amplifier
  • OPA3S328 — High-speed (40 MHz) high-precision (60 µV) low-noise op amp with integrated gain switches
  • OPA404 — Quad High Speed Precision Difet® Operational Amplifier
  • OPA4140 — Quad-channel, 11-MHz, low-noise 36-V JFET precision operational amplifier with rail-to-rail output
  • OPA4180 — 0.1 uV/C Drift, Quad, Low Noise, Rail-to-Rail, 36V Zero Drift Op Amp
  • OPA4187 — Zero-drift (10µV, 0.001µV/C˚), MUX-friendly, low power, RRO, CMOS quad precision op amp (quad)
  • OPA4188 — 0.03µV/C, Low Noise, Rail-to-Rail Output, 36V Zero-Drift Operational Amplifier
  • OPA4189 — Quad, 14-MHz, MUX-friendly, zero-drift, rail-to-rail-output, precision operational amplifier
  • OPA4191 — Quad, low-power, 36-V, precision, e-trim amplifier with RRIO
  • OPA4192 — Low-Noise, Low Quiescent Current, 36V RRI/O Precision Op Amps, E-Trim™ Series
  • OPA4196 — Quad, 36-V, low power, all-purpose amplifier with mux-friendly input
  • OPA4197 — Quad, 36-V, precision, rail-to-rail input output, low offset voltage op amp
  • OPA4197-Q1 — Automotive, quad channel, high precision, 36-V, 10-MHz, rail-to-rail input output op amp
  • OPA4202 — Low-noise (0.2 µVPP, 9 nV/√Hz), heavy-capacitive-drive (25 nF) quad super-beta precision op amp
  • OPA4205 — Quad, rail-to-rail bipolar precision e-trim™ op amp with low input bias current and low noise
  • OPA4209 — Quad, 2.2-nV/rtHz, 18-MHz, precision, RRO, 36-V operational amplifier
  • OPA4227 — Quad high precision, low noise operational amplifiers
  • OPA4228 — Quad high precision, wide bandwidth, low noise operational amplifiers
  • OPA4241 — Quad, 5V single-supply, micro power operational amplifiers
  • OPA4251 — Quad, 15V single-supply, micro power operational amplifiers
  • OPA4277 — Quad, low-offset (10 µV), precision op amp
  • OPA4277-EP — Enhanced Products High Precision Operational Amplifiers
  • OPA4277-SP — High-precision operational amplifier
  • OPA4317 — Quad, Low Offset, Rail-to-Rail I/O Operational Amplifier
  • OPA4325 — Low noise (10nV/rtHz), wide bandwidth (10MHz), low power (0.65mA), quad zero crossover op amp
  • OPA4328 — Quad-channel, precision, 50µV offset voltage, 40MHz wide-bandwidth RRIO CMOS operational amplifier
  • OPA4330 — Quad, 1.8-V, 35-µA, micropower, precision, zero drift CMOS op amp
  • OPA4336 — Quad Single-Supply, MicroPower CMOS Operational Amplifiers MicroAmplifier™ Series
  • OPA4340 — Quad, single-supply, rail-to-rail, low power operational amplifier
  • OPA4350 — Quad, single-supply, rail-to-rail, high speed, low noise operational amplifier
  • OPA4376 — Quad precision, low-noise, low quiescent current operational amplifier
  • OPA4376-Q1 — Automotive-Qualified Precision Op Amp With E-Trim, Low Quiescent Current and Low Noise
  • OPA4377 — Quad low-cost, low-noise, 5.5-MHz CMOS operational amplifier
  • OPA4377-Q1 — Automotive-Qualified CMOS Operational Amplifier With Low Noise and 5.5MHz GBW
  • OPA4383 — Quad, zero-drift, micropower (65μA), high speed-to-power ratio (2.5MHz) RRIO operational amplifier
  • OPA4387 — Ultra-high precision (2 μV), zero-drift (0.003 μV/C), low-input-bias-current op amp (quad)
  • OPA4388 — Quad, 10-MHz, CMOS, zero-drift, zero-crossover, true RRIO precision operational amplifier
  • OPA4391 — Quad, micropower, high speed-to-power ratio, low-bias-current RRIO precision operational amplifier
  • OPA4392 — Quad, low-offset (10 μV), low-noise (6 nV/rtHz) femtoampere-bias-current e-trim™ op amp
  • OPA4397 — Quad, low-offset (60 μV), low-noise, low-bias-current RRIO e-trim™ operational amplifier
  • OPA4727 — e-trim™ 20MHz, High Precision CMOS Operational Amplifier
  • OPA4H014-SEP — Radiation-tolerant, 11-MHz, low-noise, precision rail-to-rail output JFET amplifier
  • OPA593 — 85-V, 100-µV wide-bandwidth (10 MHz) high-output-current (250 mA) precision operational amplifier
  • OPA627 — 55V/µs high-speed 0.8µV/˚C max drift precision operational amplifier
  • OPA637 — Precision High-Speed Difet® Operational Amplifiers
  • OPA727 — Single high precision, low noise operational amplifiers
  • OPA728 — 20-MHz, 2.5-fA/√Hz noise, high precision operational amplifiers
  • OPA734 — Single 0.05-uV/degC (max) single-supply CMOS op amp, zero-drift series with shutdown
  • OPA735 — Single 0.05uV/degC (max) single-supply CMOS operational amplifier, zero-drift series
  • OPA827 — Low-noise, high-precision, JFET-input operational amplifier
  • OPA828 — High-speed (45 MHz and 150 V/μs), 36-V, low-noise (4 nV/√Hz) RRO JFET operational amplifier
  • OPA928 — High-voltage femtoampere-input-bias precision e-trim™ operational amplifier with RRIO
  • SM72501 — Precision, CMOS Input, RRIO, Wide Supply Range Amplifier
  • SM73307 — Dual, precision, 17-MHz, low-noise, CMOS input amplifier
  • SM73308 — Low Offset, Low Noise, RRO Operational Amplifiers
  • THP210 — High precision (40-μV, 0.1μV/C), high-voltage (36-V), low-noise (3.7-nV/√Hz), fully-differential amp
  • TLC1078 — Dual Micropower Precision Low-Voltage Operational Amplifier
  • TLC1079 — Quad Micropower Precision Low-Voltage Operational Amplifier
  • TLC2201 — Low Noise Precision Rail-To-Rail Output Operational Amplifier
  • TLC2201-SP — Space Low Noise Precision Advanced LinCMOS™ Single Operational Amplifier
  • TLC2201A — Advanced LinCMOS™ Low-Noise Precision Operational Amplifier
  • TLC2201AM — Low Noise Precision Advanced LinCMOS™ Single Operational Amplifier
  • TLC2201AM-MIL — Low Noise Precision Advanced LinCMOS™ Single Operational Amplifier
  • TLC2201M — Low Noise Precision Advanced LinCMOS™ Single Operational Amplifier
  • TLC2202 — Dual Low-Noise Precision Rail-To-Rail Operational Amplifier
  • TLC2202A — Advanced LinCMOS™ Low-Noise Precision Dual Operational Amplifier
  • TLC2202AM — Low Noise Precision Advanced LinCMOS™ Dual Operational Amplifier
  • TLC2202M — Low Noise Precision Advanced LinCMOS™ Dual Operational Amplifier
  • TLC2252A — Rail-To-Rail Dual Operational Amplifier
  • TLC2252A-EP — Enhanced Product Advanced Lincmos Rail-To-Rail Very Low Power Operational Amplifiers
  • TLC2252A-Q1 — Automotive Catalog Advanced LinCMOS Rail-to-Rail Very Low-Power Operational Amplifier
  • TLC2252AM — Rail-To-Rail uPower Precision Advanced LinCMOS™ Dual Operational Amplifier
  • TLC2254A — Rail-To-Rail Quad Operational Amplifier
  • TLC2254A-EP — Enhanced Product Advanced Lincmos Rail-To-Rail Very Low-Power Operational Amplifiers
  • TLC2254A-Q1 — Automotive advanced LinCMOS rail-to-rail very low-power precision operational amplifier
  • TLC2254AM — Rail-To-Rail uPower Precision Advanced LinCMOS™ Quad Operational Amplifier
  • TLC2264A-Q1 — Automotive Catalog Rail-to-Rail Very Low Power Operational Amplifier
  • TLC2272A — Dual, low-noise, 2.18-MHz rail-to-rail operational amplifier
  • TLC2272A-EP — Enhanced Product Advanced Lincmos(Tm) Rail-To-Rail Dual Operational Amplifier
  • TLC2272A-Q1 — Automotive Catalog Advanced LinCMOS™ Rail-to-Rail Operational Amplifiers
  • TLC2272AM — Advanced LinCMOS™ rail-to-rail dual precision operational amplifier with wide temperature r
  • TLC2272AM-MIL — Rail-To-Rail Low Noise Advanced LinCMOS™ Dual Operational Amplifier
  • TLC2274A — Advanced LinCMOS™ rail-to-rail quad precision operational amplifier
  • TLC2274A-EP — Enhanced Product Advanced Lincmos(Tm) Rail-To-Rail Operational Amplifiers
  • TLC2274A-Q1 — Automotive advanced LinCMOS™ rail-to-rail quad precision operational amplifier
  • TLC2652 — High precision, 1-µV offset, chopper-stabilized operational amplifier
  • TLC2652A — Advanced LinCMOS™ Precision Chopper-Stabilized Operational Amplifier
  • TLC2652AM — Precision Chopper-Stabilized Advanced LinCMOS™ Operational Amplifier
  • TLC2652M-MIL — Precision Chopper-Stabilized Advanced LinCMOS™ Operational Amplifier
  • TLC2654 — Low-Noise Chopper-Stabilized Operational Amplifier
  • TLC2654A — Advanced LinCMOS™ Low-Noise Chopper-Stabilized Operational Amplifier
  • TLC2654AM — Low Noise Chopper-Stabilized Advanced LinCMOS™ Operational Amplifier
  • TLC277 — Dual Precision Single Supply Operational Amplifier
  • TLC279 — Quad Precision Single Supply Operational Amplifier
  • TLC27L7 — Dual Precision Single Supply uPower Operational Amplifier
  • TLC27L9 — Quad Precision Single Supply Micropower Operational Amplifier
  • TLC27M7 — Dual, precision single supply low-power operational amplifier
  • TLC27M9 — Quad, precision single supply low-power operational amplifier
  • TLC4501 — Advanced LinEPIC Self-Calibrating (Self-Cal) Precision Single Operational Amplifier
  • TLC4501A — Advanced LinEPIC Self-Calibrating (Self-Cal) Precision Operational Amplifier
  • TLC4502 — Advanced LinEPIC Self-Calibrating Precision Dual Operational Amplifier
  • TLC4502A — Advanced, self-calibrating, precision, dual operational amplifier
  • TLC4502AM — Advanced, self-calibrating, precision, dual operational amplifier
  • TLC4502M — Advanced LinEPIC Self-Calibrating Precision Dual Operational Amplifier
  • TLE2021 — Precision Low-Power Single Supply Operational Amplifier
  • TLE2021-EP — Enhanced Product Precision Low-Power Single Supply Operational Amplifier
  • TLE2021-Q1 — Automotive excalibur high-speed low-power single operational amplifier
  • TLE2021A — Excalibur high-speed low-power single precision operational amplifier
  • TLE2021A-EP — Enhanced Product Excalibur High-Speed Low-Power Precision Operational Amplifiers
  • TLE2021A-Q1 — Automotive excalibur high-speed low-power single precision operational amplifier
  • TLE2021AM — High-Speed, Low-Power, Precision Single Operational Amplifier
  • TLE2021B — Excalibur High-Speed Low-Power Precision Operational Amplifier
  • TLE2021M — High-Speed, Low-Power, Precision Single Operational Amplifier
  • TLE2021M-MIL — High-Speed, Low-Power, Precision Single Operational Amplifier
  • TLE2022 — Dual Precision Low-Power Single Supply Operational Amplifier
  • TLE2022-EP — Enhanced Product Excalibur High-Speed Low-Power Precision Operational Amplifiers
  • TLE2022-Q1 — Automotive excalibur high-speed low-power single dual operational amplifier
  • TLE2022A — Excalibur High-Speed Low-Power Precision Dual Operational Amplifier
  • TLE2022A-EP — Enhanced Product Excalibur High-Speed Low-Power Precision Operational Amplifiers
  • TLE2022A-Q1 — Automotive excalibur high-speed low-power dual precision operational amplifier
  • TLE2022AM — High-Speed, Low-Power, Precision Dual Operational Amplifier
  • TLE2022AM-MIL — High-Speed, Low-Power, Precision Dual Operational Amplifier
  • TLE2022BM — High-Speed, Low-Power, Precision Dual Operational Amplifier
  • TLE2022M — Excalibur high-speed low-power precision dual operational amplifier with wide temperature ranges
  • TLE2022M-MIL — High-Speed, Low-Power, Precision Dual Operational Amplifier
  • TLE2024A — Excalibur high-speed low-power quad precision operational amplifier
  • TLE2024A-EP — Enhanced Product Excalibur High-Speed Low-Power Precision Op Amps
  • TLE2024AM — High-Speed, Low-Power, Precision Quad Operational Amplifier
  • TLE2024B — Excalibur High-Speed Low-Power Precision Quad Operational Amplifier
  • TLE2027 — Low-Noise Precision Operational Amplifier
  • TLE2027AM — Low-noise, high-speed, precision (25-µV offset) single operational amplifier
  • TLE2027AM-MIL — Low-Noise, High-Speed Precision Single Operational Amplifier
  • TLE2027M — Low-noise, high-speed, precision (100-µV offset) single operational amplifier
  • TLE2027M-MIL — Low-Noise, High-Speed Precision Single Operational Amplifier
  • TLE2037 — Low-Noise High-Speed Precision Decomp. Operational Amplifier
  • TLE2037A — Excalibur Low-Noise High-Speed Precision Decompensated Operational-Amplifier
  • TLE2037A-Q1 — Automotive Excalibur Low-Noise High-Speed Precision Operational Amplifiers
  • TLE2141 — Low Noise High-Speed Precision Single Supply Operational Amplifier
  • TLE2141-EP — Enhanced Product Excaliber Low-Noise High-Speed Precision Operational Amplifier
  • TLE2141-Q1 — Automotive Low-Noise High-Speed Precision Op Amps
  • TLE2141A — Excalibur Low-Noise High-Speed Precision Operational Amplifier
  • TLE2141AM — High Speed High Drive Precision Operational Amplifier
  • TLE2141M — High Speed High Drive Precision Operational Amplifier
  • TLE2141M-D — High speed high drive single operational amplifier
  • TLV07 — Precision, 36-V, low noise, rail-to-rail output, operational amplifier
  • TLV197-Q1 — Automotive, single channel, high-voltage, precision, RRIO op amp
  • TLV2186 — Low power,  rail-to-rail input and output, 24-V, zero-drift operational amplifier
  • TLV2197-Q1 — Automotive, dual channel, high-voltage, precision, RRIO op amp
  • TLV2252 — Dual Rail-To-Rail Low-Voltage Low Power Operational Amplifier
  • TLV2252-Q1 — Automotive, advanced LinCMOS™ rail-to-rail very low-power dual operational amplifier
  • TLV2252A — Advanced LinCMOS™ rail-to-rail very low-power dual precision operational amplifier
  • TLV2252A-EP — Enhanced Product Advanced Lincmos(Tm) Rail-To-Rail Very Low-Power Operational Amplifiers
  • TLV2252A-Q1 — Automotive, advanced LinCMOS™ rail-to-rail very low-power dual precision op amp
  • TLV2252AM — Low Voltage Rail-To-Rail uPower Precision Advanced LinCMOS™ Dual Operational Amplifier
  • TLV2252M — Low Voltage Rail-To-Rail Micropower Advanced LinCMOS™ Dual Operational Amplifier
  • TLV2254 — Advanced LinCMOS™ rail-to-rail very low-power quad operational amplifier
  • TLV2254A — Quad Low-Voltage Rail-To-Rail Operational Amplifier
  • TLV2254A-EP — Enhanced Product Advanced Lincmos(Tm) Rail-To-Rail Very Low-Power Operational Amplifiers
  • TLV2262 — Dual Rail-To-Rail Low-Voltage Low-Power Operational Amplifier
  • TLV2262A — Dual advanced linCMOS™, 0.2-mA, rail-to-rail operational amplifier
  • TLV2262A-Q1 — Dual, automotive precision advanced linCMOS rail-to-rail operational amplifier
  • TLV2262AM — Low Voltage Rail-To-Rail Low Power Precision Advanced LinCMOS™ Dual Operational Amplifier
  • TLV2262M — Low Voltage Rail-To-Rail Low Power Advanced LinCMOS™ Dual Operational Amplifier
  • TLV2264 — Quad Rail-To-Rail Low-Voltage Low-Power Operational Amplifier
  • TLV2264A — Quad, advanced linCMOS™, 0.2-mA, rail-to-rail operational amplifier
  • TLV2264A-Q1 — Quad, automotive precision advanced linCMOS rail-to-rail operational amplifier
  • TLV2264AM — Low Voltage Rail-To-Rail Low Power Precision Advanced LinCMOS™ Quad Operational Amplifier
  • TLV2333 — Dual, 350-kHz, low-noise, RRIO, CMOS operational amplifier for cost-sensitive systems
  • TLV2369 — Dual, 800-nA 1.8-V RRIO operational amplifier with zero-crossover distortion
  • TLV2376 — Dual 5.5-MHz, 100-µV offset, 8-nV/√Hz noise, 815-µA power, precision operational amplifiers
  • TLV2422A — Rail-to-Rail Output Wide-Input-Voltage Micropower Dual Op Amps
  • TLV2442 — Advanced LinCMOS™ rail-to-rail output wide-input-voltage dual operational amplifier
  • TLV2442A — Advanced LinCMOS™ rail-to-rail output wide-input-voltage dual precision op amp
  • TLV2442A-Q1 — Automotive, advanced LinCMOS™ rail-to-rail output wide-input-voltage dual precision op amp
  • TLV2444 — Advanced LinCMOS™ rail-to-rail output wide-input-voltage quad operational amplifier
  • TLV2444A — Advanced LinCMOS™ rail-to-rail output wide-input-voltage quad precision op amp
  • TLV333 — Single, 350-kHz, low-noise, RRIO, CMOS operational amplifier for cost-sensitive systems
  • TLV369 — Single, 800-nA, 1.8-V, RRIO op amp with zero-crossover distortion for cost-sensitive application
  • TLV376 — 5.5-MHz, 100-µV offset, 8-nV/√Hz noise, 815-µA power, precision operational amplifier
  • TLV4197-Q1 — Automotive, quad-channel, high-voltage, low-offset, rail-to-rail input output op amp
  • TLV4333 — Quad, 350-kHz, low-noise, RRIO, CMOS operational amplifier for cost-sensitive systems
  • TLV4376 — Quad 5.5-MHz, 100-µV offset, 8-nV/√Hz noise, 815-µA power, precision operational amplifiers
  • TLV6003 — Single ultra-low power (980nA), 16-V precision rail-to-rail input and output operational amplifier
  • TLV8811 — Single 425-nA precision nanopower operational amplifier for cost-optimized systems
  • TLV8812 — Dual 425-nA precision nanopower operational amplifier for cost-optimized systems
Download
Design tool

CIRCUIT060001 — Single-supply, low-side, unidirectional current-sensing circuit

This single–supply, low–side, current sensing solution accurately detects load current up to 1A and converts it to a voltage between 50mV and 4.9V. The input current range and output voltage range can be scaled as necessary and larger supplies can be used to accommodate larger swings.
User guide: PDF
View Options
Design tool

CIRCUIT060002 — Temperature sensing with NTC thermistor circuit

This temperature sensing circuit uses a resistor in series with a negative–temperature–coefficient (NTC) thermistor to form a voltage divider, which has the effect of producing an output voltage that is linear over temperature. The circuit uses an op amp in a non–inverting (...)
User guide: PDF
View Options
Design tool

CIRCUIT060003 — Temperature sensing with PTC thermistor circuit

This temperature sensing circuit uses a resistor in series with a positive–temperature–coefficient (PTC) thermistor to form a voltage–divider, which has the effect of producing an output voltage that is linear over temperature. The circuit uses an op amp in a non–inverting (...)
View Options
Design tool

CIRCUIT060004 — Low-noise and long-range PIR sensor conditioner circuit

This two stage amplifier design amplifies and filters the signal from a passive infrared (PIR) sensor. The circuit includes multiple low–pass and high–pass filters to reduce noise at the output of the circuit to be able to detect motion at long distances and reduce false triggers. This (...)
View Options
Design tool

CIRCUIT060005 — High-side current sensing with discrete difference amplifier circuit

This single–supply, high–side, low–cost current sensing solution detects load current between 50mA and 1A and converters it to an output voltage from 0.25V to 5V. High–side sensing allows for the system to identify ground shorts and does not create a ground disturbance on (...)
User guide: PDF
View Options
Design tool

CIRCUIT060006 — Bridge amplifier circuit

A strain gauge is a sensor whose resistance varies with applied force. To measure the variation in resistance, the strain gauge is placed in a bridge configuration. This design uses a 2 op amp instrumentation circuit to amplify a differential signal created by the change in resistance of a strain (...)
View Options
Design tool

CIRCUIT060007 — Low-side bidirectional current-sensing circuit

This single-supply, low-side, bidirectional, current-sensing solution can accurately detect load currents from –1 A to 1 A. The linear range of the output is from 110 mV to 3.19 V. Low-side current sensing keeps the common-mode voltage near ground, and is thus most useful in applications with (...)
User guide: PDF
View Options
Design tool

CIRCUIT060008 — Full-wave rectifier circuit

This absolute value circuit can turn alternating current (AC) signals to single polarity signals. This circuit functions with limited distortion for ±10-V input signals at frequencies up to 50kHz and for signals as small as ±25mV at frequencies up to 1kHz.
User guide: PDF
View Options
Design tool

CIRCUIT060009 — Half-wave rectifier circuit

The precision half-wave rectifier inverts and transfers only the negative-half input of a time varying input signal (preferably sinusoidal) to its output. By appropriately selecting the feedback resistor values, different gains can be achieved. Precision half-wave rectifiers are commonly used with (...)
View Options
Design tool

CIRCUIT060010 — PWM generator circuit

This circuit utilizes a triangle wave generator and comparator to generate a 500 kHz pulse-width modulated (PWM) waveform with a duty cycle that is inversely proportional to the input voltage. An op amp and comparator generate a triangle waveform which is applied to the inverting input of a second (...)
User guide: PDF
View Options
Design tool

CIRCUIT060011 — Single-supply, second-order, multiple feedback high-pass filter circuit

The multiple-feedback (MFB) high-pass (HP) filter is a 2nd-order active filter. Vref provides a DC offset to accommodate for single-supply applications. This HP filter inverts the signal (Gain = –1 V/V) for frequencies in the pass band. An MFB filter is preferable when the gain is high or (...)
View Options
Design tool

CIRCUIT060012 — Single-supply, 2nd-order, multiple feedback low-pass filter circuit

The multiple-feedback (MFB) low-pass filter (LP filter) is a second-order active filter. Vref provides a DC offset to accommodate for single-supply applications. This LP filter inverts the signal (Gain = –1 V/V) for frequencies in the pass band. An MFB filter is preferable when the gain is (...)
View Options
Design tool

CIRCUIT060014 — Voltage-to-current (V-I) converter circuit with MOSFET

This single-supply, low-side, V-I converter delivers a well-regulated current to a load which can be connected to a voltage greater than the op amp supply voltage. The circuit accepts an input voltage between 0 V and 2 V and converts it to a current between 0 mA and 100 mA. The current is (...)
User guide: PDF
View Options
Design tool

CIRCUIT060016 — Non-inverting microphone pre-amplifier circuit

This circuit uses a non–inverting amplifier circuit configuration to amplify the microphone output signal. This circuit has very good magnitude flatness and exhibits minor frequency response deviations over the audio frequency range. The circuit is designed to be operated from a single 5-V (...)
User guide: PDF
View Options
Design tool

CIRCUIT060017 — Dual-supply, discrete, programmable gain amplifier circuit

This circuit provides programmable, non-inverting gains ranging from 6 dB (2 V/V) to 60 dB (1000 V/V) using a variable input resistance. The design maintains the same cutoff frequency over the gain range.
View Options
Design tool

CIRCUIT060018 — Photodiode amplifier circuit

This circuit consists of an op amp configured as a transimpedance amplifier for amplifying the light dependent current of a photodiode.
User guide: PDF
View Options
Design tool

CIRCUIT060019 — Inverting op amp with non-inverting positive reference voltage circuit

This design uses an inverting amplifier with a non-inverting positive reference voltage to translate an input signal of –1 V to 2 V to an output voltage of 0.05 V to 4.95 V. This circuit can be used to translate a sensor output voltage with a positive slope and negative offset to a usable (...)
View Options
Design tool

CIRCUIT060020 — Inverting amplifier circuit

This design inverts the input signal, Vi , and applies a signal gain of –2 V/V. The input signal typically comes from a low-impedance source because the input impedance of this circuit is determined by the input resistor, R1. The common-mode voltage of an inverting amplifier is equal to the (...)
View Options
Design tool

CIRCUIT060074 — High-side current sensing with comparator circuit

This high-side, current sensing solution uses one comparator with a rail-to-rail input common mode range to create an over-current alert (OC-Alert) signal at the comparator output (COMP OUT) if the load current rises above 1 A. The OC-Alert signal in this implementation is active low. So when the (...)
View Options
Design tool

CIRCUIT060075 — High-speed overcurrent detection circuit

This high-speed, low-side overcurrent detection solution is implemented with a single zero-drift fast-settling amplifier (OPA388) and one high-speed comparator (TLV3201). This circuit is designed for applications that monitor fast current signals and overcurrent events, such as current detection in (...)
View Options
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
User guide: PDF
View Options
Package Pins CAD symbols, footprints & 3D models
PDIP (P) 8 Ultra Librarian
SOIC (D) 8 Ultra Librarian
SOP (PS) 8 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos