Home Battery management ICs Battery charger ICs
Home
Battery management ICs
Battery charger ICs

BQ24618

ACTIVE

Standalone 1-6 cell Buck battery charge controller USB friendly with 5V-28V input

Order now
Data sheet

BQ24618

ACTIVE
Data sheet Order now

Product details

Rating Catalog Number of series cells 1, 2, 3, 4, 5, 6 Cell chemistry Li-Ion/Li-Polymer Charge current (max) (A) 10 Features BAT temp thermistor monitoring (hot/cold profile), IINDPM (Input current limit), Power Path Vin (min) (V) 4.7 Vin (max) (V) 28 Absolute max Vin (max) (V) 33 Control topology Switch-Mode Buck Battery charge voltage (min) (V) 2.1 Battery charge voltage (max) (V) 26 Control interface Standalone (RC-Settable) Operating temperature range (°C) -40 to 85
Rating Catalog Number of series cells 1, 2, 3, 4, 5, 6 Cell chemistry Li-Ion/Li-Polymer Charge current (max) (A) 10 Features BAT temp thermistor monitoring (hot/cold profile), IINDPM (Input current limit), Power Path Vin (min) (V) 4.7 Vin (max) (V) 28 Absolute max Vin (max) (V) 33 Control topology Switch-Mode Buck Battery charge voltage (min) (V) 2.1 Battery charge voltage (max) (V) 26 Control interface Standalone (RC-Settable) Operating temperature range (°C) -40 to 85
VQFN (RGE) 24 16 mm² 4 x 4
  • USB-Friendly 4.7-V to 28-V Input Operating
    Range
  • Stand-Alone Charge Controller to Support 1 to 6
    Li-Ion or Li-Polymer Battery Cells
  • Up to 10-A Charge Current and Adapter Current
  • 600-kHz NMOS-NMOS Synchronous Buck
    Converter
  • High-Accuracy Voltage and Current Regulation
    • ±0.5% Charge Voltage Accuracy
    • ±3% Charge Current Accuracy
    • ±3% Adapter Current Accuracy
  • Integration
    • Automatic System Power Selection From
      Adapter or Battery
    • Internal Loop Compensation
    • Internal Soft Start
    • Dynamic Power Management
  • Safety Protection
    • Input Overvoltage Protection
    • Battery Thermistor Sense Hot/Cold Charge
      Suspend
    • Battery Detection
    • Reverse-Protection Input FET
    • Programmable Safety Timer
    • Charge Overcurrent Protection
    • Battery Short Protection
    • Battery Overvoltage Protection
    • Thermal Shutdown
  • Status Outputs
    • Adapter Present
    • Charger Operation Status
  • Charge Enable Pin
  • 6-V Gate Drive for Synchronous Buck Converter
  • 30-ns Driver Dead-Time and 99.5% Maximum
    Effective Duty Cycle
  • Energy Star Low Quiescent Current Iq
    • < 15-µA Off-State Battery Discharge Current
    • < 1.5-mA Off-State Input Quiescent Current
  • APPLICATIONS
    • Tablet PCs
    • Smart Phones
    • Portable Media Players, Navigation Devices,
      Notebooks and Ultra-Mobile PCs
    • Personal Digital Assistants
    • Handheld Terminals
    • Industrial and Medical Equipment

All other trademarks are the property of their respective owners
  • USB-Friendly 4.7-V to 28-V Input Operating
    Range
  • Stand-Alone Charge Controller to Support 1 to 6
    Li-Ion or Li-Polymer Battery Cells
  • Up to 10-A Charge Current and Adapter Current
  • 600-kHz NMOS-NMOS Synchronous Buck
    Converter
  • High-Accuracy Voltage and Current Regulation
    • ±0.5% Charge Voltage Accuracy
    • ±3% Charge Current Accuracy
    • ±3% Adapter Current Accuracy
  • Integration
    • Automatic System Power Selection From
      Adapter or Battery
    • Internal Loop Compensation
    • Internal Soft Start
    • Dynamic Power Management
  • Safety Protection
    • Input Overvoltage Protection
    • Battery Thermistor Sense Hot/Cold Charge
      Suspend
    • Battery Detection
    • Reverse-Protection Input FET
    • Programmable Safety Timer
    • Charge Overcurrent Protection
    • Battery Short Protection
    • Battery Overvoltage Protection
    • Thermal Shutdown
  • Status Outputs
    • Adapter Present
    • Charger Operation Status
  • Charge Enable Pin
  • 6-V Gate Drive for Synchronous Buck Converter
  • 30-ns Driver Dead-Time and 99.5% Maximum
    Effective Duty Cycle
  • Energy Star Low Quiescent Current Iq
    • < 15-µA Off-State Battery Discharge Current
    • < 1.5-mA Off-State Input Quiescent Current
  • APPLICATIONS
    • Tablet PCs
    • Smart Phones
    • Portable Media Players, Navigation Devices,
      Notebooks and Ultra-Mobile PCs
    • Personal Digital Assistants
    • Handheld Terminals
    • Industrial and Medical Equipment

All other trademarks are the property of their respective owners

The bq24618 device is highly integrated Li-ion or Li-polymer switched-mode battery-charge controller. The bq24618 offers a constant-frequency synchronous switching PWM controller with high-accuracy charge current and voltage regulation, charge preconditioning, termination, adapter current regulation and charge status monitoring.

The bq24618 operates from either a USB port or AC adapter and supports charge currents up to 10 A. The device charges the battery in three phases: preconditioning, constant current, and constant voltage. Charge is terminated when the current reaches a minimum user-selectable level. A programmable charge timer provides a safety backup for charge termination. The bq24618 automatically restarts the charge cycle if the battery voltage falls below an internal threshold, and enters a low-quiescent current sleep mode when the input voltage falls below the battery voltage.

The bq24618 device is highly integrated Li-ion or Li-polymer switched-mode battery-charge controller. The bq24618 offers a constant-frequency synchronous switching PWM controller with high-accuracy charge current and voltage regulation, charge preconditioning, termination, adapter current regulation and charge status monitoring.

The bq24618 operates from either a USB port or AC adapter and supports charge currents up to 10 A. The device charges the battery in three phases: preconditioning, constant current, and constant voltage. Charge is terminated when the current reaches a minimum user-selectable level. A programmable charge timer provides a safety backup for charge termination. The bq24618 automatically restarts the charge cycle if the battery voltage falls below an internal threshold, and enters a low-quiescent current sleep mode when the input voltage falls below the battery voltage.
filter Find other Battery charger ICs
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 2
Type Title Date
* Data sheet bq24618 Stand-Alone USB-Friendly Synchronous Switched-Mode Li-Ion or Li-Polymer Battery Charger With System Power Selector and Low Iq datasheet (Rev. B) PDF | HTML 29 Apr 2015
Application note BQ241xx/BQ246xx Selection of Multi-Cell Standalone Switching Battery Chargers 31 Dec 2019

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Calculation tool

SLUC175 — bq246xx Calculation Tool V1.5

Supported products & hardware

Supported products & hardware

Products
Battery charger ICs
  • BQ24600 — Standalone 1-6 cell Buck battery charge controller
  • BQ24610 — Standalone 1-6 cell Buck battery charge controller with 5V-28V input
  • BQ24616 — Standalone 1-6 cell Buck battery charge controller with JEITA compliance
  • BQ24617 — Standalone 1-5 cell Buck battery charge controller with 5V-24V input
  • BQ24618 — Standalone 1-6 cell Buck battery charge controller USB friendly with 5V-28V input
  • BQ24620 — Standalone 1-7 cell Buck battery charge controller for Lithium phosphate batteries
  • BQ24630 — Standalone 1-7 cell Buck battery charge controller for LiFePO4 batteries with system power
  • BQ24640 — Standalone 1-8 cell Buck battery charge controller for super capacitor
  • BQ24650 — Standalone 1-6 cell Buck battery charge controller with solar input and integrated MPPT
Download
Package Pins CAD symbols, footprints & 3D models
VQFN (RGE) 24 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos