Home Audio, haptics & piezo Audio converters Audio DACs
Home
Audio, haptics & piezo
Audio converters
Audio DACs

TAD5112

ACTIVE

Low-power stereo audio DAC with 110dB dynamic range, and headphone and line driver

Order now
Data sheet

TAD5112

ACTIVE
Data sheet Order now

Product details

Number of DAC channels 2 Sampling rate (min) (kHz) 8 Sampling rate (max) (kHz) 768 THD+N (dB) -101 Control interface I2C, SPI Resolution (Bits) 32 DAC SNR (typ) (dB) 110 Analog outputs 2 Architecture Delta-Sigma Operating temperature range (°C) -40 to 125 Rating Catalog
Number of DAC channels 2 Sampling rate (min) (kHz) 8 Sampling rate (max) (kHz) 768 THD+N (dB) -101 Control interface I2C, SPI Resolution (Bits) 32 DAC SNR (typ) (dB) 110 Analog outputs 2 Architecture Delta-Sigma Operating temperature range (°C) -40 to 125 Rating Catalog
VQFN (RGE) 24 16 mm² 4 x 4
  • Stereo differential or Quad single-ended low-power audio DAC
    • Performance:
      • DAC to differential line-out dynamic range: 110dB
      • DAC to differential headphone-out dynamic range: 109dB
      • THD+N: –101dB
    • Line-out/headphone output voltage:
      • Differential, 2VRMS full-scale
      • Psuedo-differential, 1VRMS full-scale
      • Single-ended, 1VRMS full-scale
    • DAC sample rates (fs) = 4kHz to 768kHz
  • Key features
    • Analog input to output bypass path
    • 4-Channel PDM digital microphone record path
    • Input and output mix/mux options
    • Voice activity detection
    • Ultrasonic activity detection
    • Ultrasonic signal or tone generator
    • Battery and thermal foldback protection
    • Signal distortion limiter
    • Low and Ultra-low latency filter options
    • Programmable HPF and Biquad filters
    • I2C & SPI Control Interface
    • Audio Serial Interface
      • Format: TDM, I2S or Left-justified (LJ)
      • Word length: 16, 20, 24 or 32 Bits
      • Bus controller and target modes
      • Daisy chain in TDM Mode
    • Programmable PLL for flexible clocking
    • Auto clock and sample rate detection
    • Low Power Modes
      • 10.5mW for 2-Ch Playback (1.8V supply)
    • Single Supply Operation AVDD: 1.8V or 3.3V
    • I/O Supply Operation: 1.2V or 1.8V or 3.3V
    • Temperature grade 1: -40°C ≤ TA ≤ +125°C
  • Stereo differential or Quad single-ended low-power audio DAC
    • Performance:
      • DAC to differential line-out dynamic range: 110dB
      • DAC to differential headphone-out dynamic range: 109dB
      • THD+N: –101dB
    • Line-out/headphone output voltage:
      • Differential, 2VRMS full-scale
      • Psuedo-differential, 1VRMS full-scale
      • Single-ended, 1VRMS full-scale
    • DAC sample rates (fs) = 4kHz to 768kHz
  • Key features
    • Analog input to output bypass path
    • 4-Channel PDM digital microphone record path
    • Input and output mix/mux options
    • Voice activity detection
    • Ultrasonic activity detection
    • Ultrasonic signal or tone generator
    • Battery and thermal foldback protection
    • Signal distortion limiter
    • Low and Ultra-low latency filter options
    • Programmable HPF and Biquad filters
    • I2C & SPI Control Interface
    • Audio Serial Interface
      • Format: TDM, I2S or Left-justified (LJ)
      • Word length: 16, 20, 24 or 32 Bits
      • Bus controller and target modes
      • Daisy chain in TDM Mode
    • Programmable PLL for flexible clocking
    • Auto clock and sample rate detection
    • Low Power Modes
      • 10.5mW for 2-Ch Playback (1.8V supply)
    • Single Supply Operation AVDD: 1.8V or 3.3V
    • I/O Supply Operation: 1.2V or 1.8V or 3.3V
    • Temperature grade 1: -40°C ≤ TA ≤ +125°C

The TAD5112 is a low-power audio DAC with 2VRMS differential output, 110dB dynamic range stereo channels or 1VRMS single-ended output, 107dB dynamic range quad channels. The TAD5112 supports both differential and single-ended inputs and outputs. The DAC outputs can be configured for either line-output or headphone loads. The DAC can drive up to 62.5mW into a 16Ω headphone load. The TAD5112 integrates programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, low-latency and ultra-low latency filter modes, and allows for sample rates up to 768kHz for both the DAC and PDM microphone signal-chains. The TAD5112 supports analog input to output bypass option and also recording up to four-channel digital microphones with the PDM interface. Data from Analog-In and Digital-In can be mixed inside the device as well. The TAD5112 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C or SPI. These integrated high-performance features, along with a single supply operation, make TAD5112 an excellent choice for space-constrained audio applications.

The TAD5112 is a low-power audio DAC with 2VRMS differential output, 110dB dynamic range stereo channels or 1VRMS single-ended output, 107dB dynamic range quad channels. The TAD5112 supports both differential and single-ended inputs and outputs. The DAC outputs can be configured for either line-output or headphone loads. The DAC can drive up to 62.5mW into a 16Ω headphone load. The TAD5112 integrates programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, low-latency and ultra-low latency filter modes, and allows for sample rates up to 768kHz for both the DAC and PDM microphone signal-chains. The TAD5112 supports analog input to output bypass option and also recording up to four-channel digital microphones with the PDM interface. Data from Analog-In and Digital-In can be mixed inside the device as well. The TAD5112 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C or SPI. These integrated high-performance features, along with a single supply operation, make TAD5112 an excellent choice for space-constrained audio applications.

filter Find other Audio DACs
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Drop-in replacement with upgraded functionality to the compared device
TAD5212 ACTIVE High-performance stereo audio DAC with 120dB dynamic range, and headphone and line driver Higher performance version
Pin-for-pin with same functionality to the compared device
TAD5142 ACTIVE Hardware-control stereo audio DAC with 110dB dynamic range, and headphone and line driver Hardware-controlled version

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 9
Type Title Date
* Data sheet TAD5112 Low-power stereo audio DAC with 110dB dynamic range, and headphone/line driver datasheet (Rev. A) PDF | HTML 21 Jan 2025
Application note TAD52xx Power Consumption Matrix Across Various Usage Scenarios PDF | HTML 11 Aug 2025
Application note Tone Generation and Application Modes of TAx5x1x Devices PDF | HTML 01 Oct 2024
Application brief TAC5x1x and TAC5x1x-Q1 Programmable Biquad Filters - Configuration and Applications PDF | HTML 27 Sep 2024
Application note Clocking Configuration of Device and Flexible Clocking For TAx5x1x Family (Rev. A) PDF | HTML 05 Sep 2024
Application note Output Swings and Common-mode Settings in AC-coupled and DC-coupled DAC (Rev. A) PDF | HTML 11 Jul 2024
Application note TAX5X1X Synchronous Sample Rate Conversion (Rev. A) PDF | HTML 20 Jun 2024
Application note Headset Detection for TAx52xx Family PDF | HTML 11 Apr 2024
Application note Clock Error Configuration, Detection, and Modes Supported in TAx5x1x Family PDF | HTML 07 Nov 2023

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TAC5112EVM-K — TAC5112 evaluation module

The TAC5112 evaluation module (EVM) allows the user to test the capabilities of the TAC5112, a two-channel low-power stereo codec, which is intended for applications in land mobile radio, IP telephone or professional audio applications. The EVM is paired with the AC-MB, a flexible motherboard (...)
User guide: PDF | HTML
Not available on TI.com
Application software & framework

PUREPATHCONSOLE — PurePath™ Console graphical development suite for audio system design and development

PurePath™ Console is a highly integrated and easy-to-use audio development suite designed specifically to simplify the evaluation, configuration and debug process associated with the development of audio products. Watch how easy it is to use the PurePath™ Console 3 software.

PurePath Console’s (...)
Supported products & hardware

Supported products & hardware

Products
Audio CODECs
  • TAC5111 — Low-power mono audio codec with 105dB dynamic range ADC and 114dB dynamic range DAC
  • TAC5111-Q1 — Automotive low-power mono audio codec with 105dB dynamic range ADC, 114dB dynamic range DAC
  • TAC5112 — Low-power stereo audio codec with 105dB dynamic range ADC and 114dB dynamic range DAC
  • TAC5112-Q1 — Automotive low-power stereo audio codec with 105dB dynamic range ADC, 114dB dynamic range DAC
  • TAC5211 — High-performance mono audio codec with 119dB dynamic range ADC and 120dB dynamic range DAC
  • TAC5212 — High-performance stereo audio codec with 119dB dynamic range ADC and 120dB dynamic range DAC
  • TAC5311-Q1 — Automotive mono audio codec with 104dB ADC, 114dB DAC, high-voltage input, mic bias & diagnostics
  • TAC5312-Q1 — Automotive stereo audio codec with 104dB ADC 114dB DAC, high-voltage input, mic bias & diagnostics
  • TAC5412-Q1 — Automotive stereo audio codec with 112dB ADC, 120dB DAC, high-voltage input, mic bias & diagnostics
  • TLV320AIC3268 — TLV320AIC3268 Ultra Low Power Stereo Audio Codec
Audio DACs
  • PCM1690 — 113dB SNR 8-Channel Audio DAC with Differential Outputs
  • PCM5242 — 4.2-VRMS DirectPath™, 32-bit, 384-kHz, 114-dB Audio Stereo DAC
  • TAD5112 — Low-power stereo audio DAC with 110dB dynamic range, and headphone and line driver
  • TAD5112-Q1 — Automotive low-power stereo audio DAC with 110dB dynamic range and headphone & line driver
  • TAD5212 — High-performance stereo audio DAC with 120dB dynamic range, and headphone and line driver
  • TAD5212-Q1 — Automotive high-performance stereo audio DAC with 120dB dynamic range and headphone & line driver
Audio ADCs
  • PCM1841-Q1 — Automotive, quad-channel 32-bit 192-kHz audio analog-to-digital converter (ADC)
  • PCM3120-Q1 — Automotive, stereo, 106-dB SNR, 768-kHz, low-power software-controlled audio ADC
  • PCM3140-Q1 — Automotive, quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 106-dB SNR
  • PCM5120-Q1 — Automotive, stereo, 120-dB SNR, 768-kHz, low-power software-controlled audio ADC
  • PCM5140-Q1 — Automotive, quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 120-dB SNR
  • PCM6020-Q1 — Automotive 2-channel audio ADC with integrated microphone bias, boost and input diagnostics
  • PCM6120-Q1 — Automotive, stereo, 123-dB SNR, 768-kHz, low-power software-controlled audio ADC
  • PCM6140-Q1 — Automotive, quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 122-dB SNR
  • PCM6260-Q1 — Automotive 6-ch audio ADC with integrated programmable mic bias, boost and input diagnostics
  • PCM6340-Q1 — Automotive 4-ch audio ADC with integrated microphone bias and input diagnostics
  • PCMD3140 — Four-channel PDM-input to TDM- or I²S-output converter
  • PCMD3140-Q1 — Automotive, 127-dB SNR, 768-kHz, four-channel, PDM-input to TDM- or I²S-output converter
  • PCMD3180 — Eight-channel pulse-density-modulation input to TDM or I²S output converter
  • PCMD3180-Q1 — Automotive, eight-channel pulse-density-modulation input to TDM or I²S output converter
  • TAA3020 — Stereo-channel 768kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 104dB SNR
  • TAA3040 — Quad-channel 768kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 104dB SNR
  • TAA5212 — High-performance stereo audio ADC with 119dB dynamic range and configurable digital filters
  • TAA5412-Q1 — Automotive stereo audio ADC with 112dB dynamic range, high-voltage input, mic bias and diagnostics
  • TLV320ADC3120 — Stereo-channel, 768-kHz, Burr-Brown™ audio analog-to-digital converter (ADC) with 106-dB SNR
  • TLV320ADC3140 — Quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 106-dB SNR
  • TLV320ADC5120 — Stereo-channel, 768-kHz, Burr-Brown™ audio analog-to-digital converter (ADC) with 120-dB SNR
  • TLV320ADC5140 — Quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 120-dB SNR
  • TLV320ADC6120 — Stereo-channel, 768-kHz, Burr-Brown™ audio analog-to-digital converter (ADC) with 123-dB SNR
  • TLV320ADC6140 — Quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 122-dB SNR
General-purpose audio amplifiers
  • TAS2552 — 4-W, digital/analog input smart amp with I/V sense for speaker protection & integ. 8.5-V boost
  • TAS2555 — 5.7-W, digital input smart amp with integrated speaker protection, advanced EQ & 8.5-V Class-H boost
  • TAS2557 — 5.7-W, digital input smart amp with integrated speaker protection, advanced EQ & 8.5-V Class-H boost
  • TAS2559 — 5.7-W, digital input smart amp with integrated speaker protection with stereo processing
  • TAS2560 — 5.6-W digital input smart amp with I/V sense for speaker protection & integrated 8.5-V Class-H boost
  • TAS2563 — 6.1-W, digital input, smart amp & integrated speaker protection, advanced EQ & 11-V Class-H boost
  • TAS5731 — 20-W stereo, 41-W mono, 8- to 21.5-V, digital input open loop Class-D audio amplifier w/ 2.1 support
  • TAS5760MD — 55-W stereo, 114-W mono, 4.5- to 26.4-V, digital input Class-D audio amplifier w/ integrated HP
Automotive audio amplifiers
  • TAS5760M-Q1 — Automotive, 25-W, 2-ch, 4.5- to 26.4-V supply digital input Class-D audio amplifier
  • TAS6422-Q1 — Automotive, 75-W, 2-MHz, 2-ch 4.5- to 26.4-V digital input Class-D audio amplifier w/ load dump
  • TAS6424-Q1 — Automotive, 75-W, 2-MHz, 4-ch, 4.5- to 26.4-V digital input Class-D audio amplifier
  • TAS6424E-Q1 — Automotive, 75-W, 2-MHz, quad-channel, 4.5- to 26.4-V digital input Class-D audio amplifier
  • TAS6424L-Q1 — Automotive, 27-W, 2-MHz, 4-ch 4.5- to 18-V digital input Class-D audio amplifier w/ load dump
  • TPA6404-Q1 — Automotive, 45-W, 2-MHz, 4-ch 4.5- to 18-V supply analog input Class-D audio amplifier w/ load dump
  • TAS5411-Q1 — Automotive, 8W, 4.5 to 18V, analog-input mono Class-D audio amplifier
  • TAS5421-Q1 — Automotive, 22W, 4.5 to 18V, analog-input mono Class-D audio amplifier
  • TAS5431-Q1 — Automotive, 8W, 4.5 to 18V analog-input mono Class-D audio amplifier
  • TAS5441-Q1 — Automotive, 22W, 4.5 to 18V analog-input mono Class-D audio amplifier
  • TAS6421-Q1 — Automotive, 75-W, 2-MHz, 1-ch 4.5- to 26.4-V digital input Class-D audio amplifier w/ load dump
  • TAS6422E-Q1 — Automotive 75-W, 2-MHz, 2-channel, 4.5-V to 26.4-V digital input Class-D audio amplifier
  • TAS6424M-Q1 — Automotive, 45-W, 2-MHz, 4-ch 4.5- to 18-V digital input Class-D audio amplifier w/ load dump
  • TAS6424MS-Q1 — Automotive 45-W, 2-MHz, 4-channel, 4.5- to 18-V digital input Class-D audio amplifier
  • TAS6424R-Q1 — Automotive, 75-W, 2-MHz, quad-channel, 4.5- to 26.4-V digital input Class-D audio amplifier
  • TAS6511-Q1 — Automotive, 45W, 2MHz, 1-channel digital input Class-D audio amplifier with current sense
  • TAS6584-Q1 — Automotive 45-V, 10-A digital input, four-channel Class-D audio amplifier with current sense
  • TAS6684-Q1 — Automotive, 45V, 13A, digital input, four-channel Class-D audio amplifier with current sense
  • TAS6754-Q1 — Automotive, 19V, digital-input four-channel Class-D audio amplifier with 1L modulation
  • TPA6304-Q1 — 45-W, 2.1-MHz analog input 4-channel automotive Class-D Burr-Brown™ audio amplifier
Speaker, TV & soundbar audio amplifiers
  • TAS2110 — 6.1W mono digital input Class-D speaker amp with integrated 11V Class-H boost
  • TAS2764 — 13-W, digital input, 2.3-V to 16-V smart amp I/V sense for speaker protection and multi-level supply
  • TAS2780 — 25-W, digital input, 4.5-V to 24-V 6-A peak smart amp with I/V sense for speaker protection
  • TAS5729MD — 12-W stereo, 24-W mono, 4.5- to 26.4-V supply, digital input open loop Class-D audio amplifier w/ HP
  • TAS5733L — 10-W stereo, 20-W mono, 8- to 16.5-V, digital input open loop Class-D audio amplifier w/ EQ & AGL
  • TAS5751M — 25-W stereo, 40-W mono, 8- to 26.4-V, digital input open loop Class-D audio amplifier w/ EQ & AGL
  • TAS5754M — 40-W stereo, 61-W mono, 4.5- to 26.4-V supply, digital input Class-D audio amplifier
  • TAS5756M — 30-W stereo, 40-W mono, 4.5- to 26.4-V supply, digital input Class-D audio amplifier
  • TAS5760L — 21-W stereo, 42-W mono, 4.5- to 16.4-V supply, digital input Class-D audio amplifier
  • TAS5760LD — 21-W stereo, 42-W mono, 4.5- to 16.4-V, digital input Class-D audio amplifier w/ integrated HP
  • TAS5760M — 55-W stereo, 114-W mono, 4.5- to 26.4-V supply, digital input Class-D audio amplifier
  • TAS5780M — 20-W stereo, 40-W mono, 4.5- to 26.4-V supply, digital input Class-D audio amplifier
  • TAS5782M — 20-W stereo, 40-W mono, 4.5- to 26.4-V, digital input Class-D Smart Audio Amplifier w/ processing
  • TAS5805M — 23-W stereo, 45-W mono, 4.5- to 26.4-V supply, digital input Class-D audio amplifier w/ processing
  • TAS5822M — 35-W, inductor-less, digital input, stereo, closed-loop Class-D amp with 96-kHz enhanced process
  • TAS5825M — 38-W stereo, 65-W mono, 4.5- to 26-V, digital input Class-D Smart Audio Amplifier w/ 192kHz arch
  • TAS5825P — 4.5V to 26.4V Class-H control digital-in Class-D audio amp with ultra-low idle & superior efficiency
Specialty audio amplifiers
  • TPA6166A2 — 43-mW, stereo, analog input headphone amplifier with accessory detection
PC & notebook audio amplifiers
  • TAS2770 — 20-W, digital input, 4.5- to 18-V smart amp with I/V sense for speaker protection
  • TAS2781 — 25 W, 4.5-V to 23-V, digital-input integrated-audio-processing speaker-protection class-D amplifier
  • TAS5766M — 50-W stereo, 100-W mono, 4.5- to 26.4-V supply, digital input Class-D Smart Audio Amplifier
Mobile phone tablet wearable audio amplifiers
  • TAS2562 — 6.1-W, digital input smart amp with I/V sense for speaker protection & integrated 11-V Class-H boost
  • TAS2564 — 7-W, digital input smart amp with I/V sense for speaker protection & integrated 13-V Class-H boost
  • TAS2572 — 6.6W digital-input smart amplifier with I/V sense and integrated 13V Class-H boost
Piezo drivers
  • DRV5825P — 4.5-V to 26.4-V, 7.5-A stereo, 15-A mono, digital input, Piezo driver with smart I/V protection
Hardware development
Evaluation board
  • ADC3120EVM-PDK — TLV320ADC3120 evaluation module for stereo-channel, 768-kHz, Burr-Brown™ audio ADC with 106-dB SNR
  • ADC3120Q1EVM-PDK — PCM3120-Q1 evaluation module for stereo, 768-kHz, audio analog-to-digital converter with 106-dB SNR
  • ADC5120EVM-PDK — TLV320ADC5120 evaluation module for stereo-channel, 768-kHz, Burr-Brown™ audio ADC with 120-dB SNR
  • ADC5120Q1EVM-PDK — PCM5120-Q1 evaluation module for stereo, 768-kHz, audio analog-to-digital converter with 120-dB SNR
  • ADC6120EVM-PDK — TLV320ADC6120 evaluation module for stereo-channel, 768-kHz, Burr-Brown™ audio ADC with 123-dB SNR
  • ADC6120Q1EVM-PDK — PCM6120-Q1 evaluation module for stereo, 768-kHz, audio analog-to-digital converter with 123-dB SNR
  • PCM1809EVM — PCM1809 evaluation module
  • PCMD3140Q1EVM-PDK — PCMD3140-Q1 evaluation module for four-channel, PDM-input to TDM- or I²S-output converter
  • PP-SALB2-EVM — PP-SALB2-EVM Smart amp speaker characterization board evaluation module (Learning Board 2)
  • TAA3040EVM-PDK — TAA3040 evaluation module
  • TAA5212EVM-K — TAA5212 evaluation module
  • TAC5112EVM-K — TAC5112 evaluation module
  • TAC5212EVM-K — TAC5212 evaluation module
  • TAD5212EVM-K — TAD5212 evaluation module
  • TAS2555YZEVM — TAS2555 5.7W Class-D Audio Amplifier Evaluation Module
  • TAS2557EVM — TAS2557 5.7-W Class-D Audio Amplifier Evaluation Module with Class-H Boost and Speaker Sense
  • TAS2559EVM — TAS2559 5.7-W Class-D Audio Amplifier Evaluation Module
  • TAS2560EVM — TAS2560 5.6W Class-D Audio Amplifier Evaluation Module
  • TAS2770EVM — TAS2770EVM Mono, Digital Input, Class-D, IV Sense Audio Amplifier Evaluation Module for QFN Package
  • TAS2781EVM — TAS2781 evaluation module for mono Class-D audio amplifier with digital input and speaker IV sense
  • TAS3251EVM — TAS3251 175W Stereo / 350W Mono Ultra-HD Digital-In Class-D Evaluation Module
  • TAS5721EVM — TAS5721 Evaluation Module
  • TAS5733LEVM — TAS5733L Digital Input, Open-Loop Class-D Audio Amplifier Evaluation Module
  • TAS5751MEVM — TAS5751M Digital Input, Open Loop Class-D Audio Amplifier Evaluation Module
  • TAS5754MDCAEVM — TAS5754M 30-W Digital I2S Input, Closed-Loop Audio Class-D Amplifier Evaluation Module
  • TAS5756MDCAEVM — TAS5756M 30-W Digital I2S Input, Closed-Loop Audio Class-D Amplifier Evaluation Module
  • TAS5760XXEVM — TAS5760M/MD/L/LD Evaluation Module
  • TAS5782MEVM — TAS5782M Digital Input Closed-Loop Class-D Audio Amplifier with 96-kHz Processing Evaluation Module
  • TAS5805MEVM — TAS5805M Digital Input Stereo Closed-Loop Class-D Audio Amplifier with Enhanced Processing EVM
  • TAS5825MEVM — Digital-input closed-loop class-D audio amp with 96kHz/192kHz extended processing evaluation module
  • TAS5411Q1EVM — TAS5411-Q1 8-W Automotive Mono Analog Input Class-D Audio Amp Evaluation Module
  • TAS5421EVM — TAS5421EVM audio amplifier eval board for eCall, telematics, instrument cluster and infotainment
  • TAS5431Q1EVM — TAS5431-Q1 8-W automotive mono analog input class-D audio amp evaluation module
  • TAS5441Q1EVM — Audio amplifier evaluation module for eCall, telematics, instrument cluster and infotainment
  • TAS6421Q1EVM — TAS6421-Q1 2.1MHz 1Ch digital input Class-D audio amplifier w/I2C diagnostics evaluation module
  • TAS6422EQ1EVM — 2-MHz, 2-channel digital input Class-D audio amplifier with I2C diagnostics evaluation module
  • TAS6422Q1EVM — TAS6422Q1 2.1MHz 2Ch Digital Input Class-D Audio Amplifier w/I2C Diagnostics Evaluation Module
  • TAS6424EQ1EVM — TAS6424E-Q1 evaluation module 75-W, 2-MHz, quad-channel digital input Class-D audio amplifier
  • TAS6424LQ1EVM — TAS6424LQ1 2.1MHz 4Ch Digital Input Class-D Audio Amplifier w/I2C Diagnostics Evaluation Module
  • TAS6424MSQ1EVM — 2.1-MHz, 4-ch digital input Class-D audio amplifier with I2C diagnostics evaluation module
  • TAS6511Q1EVM — TAS6511-Q1 evaluation module
  • TAS6584Q1EVM — TAS6584-Q1 evaluation module for 45-V, 10-A digital input, four-channel Class-D audio amp
  • TAS6684Q1EVM — TAS6684-Q1 evaluation module
  • TAS6754Q1EVM — TAS6754-Q1 evaluation module
  • TPA6304Q1EVM — 2.1-MHz analog input 4-channel automotive Class-D audio amplifier evaluation module
  • TPA6404Q1EVM — TPA6404-Q1 50-W, 2-MHz Analog Input 4-Channel Automotive Class-D Audio Amplifier Evaluation Module
Development kit
Request
Driver or library

TAC5X1X-LINUX-DRIVER — These Linux drivers support our TAC5x1x family including ADC, DAC and CODEC.

These Linux drivers support our TAC5x1x family including ADC, DAC and CODEC. These drivers include both .c and .h files.
Supported products & hardware

Supported products & hardware

Products
Audio CODECs
  • TAC5111 — Low-power mono audio codec with 105dB dynamic range ADC and 114dB dynamic range DAC
  • TAC5111-Q1 — Automotive low-power mono audio codec with 105dB dynamic range ADC, 114dB dynamic range DAC
  • TAC5211 — High-performance mono audio codec with 119dB dynamic range ADC and 120dB dynamic range DAC
  • TAC5301-Q1 — Automotive mono audio codec with 101dB ADC, 110dB DAC and programmable high-voltage mic bias
  • TAC5311-Q1 — Automotive mono audio codec with 104dB ADC, 114dB DAC, high-voltage input, mic bias & diagnostics
  • TAC5412-Q1 — Automotive stereo audio codec with 112dB ADC, 120dB DAC, high-voltage input, mic bias & diagnostics
  • TAC5112 — Low-power stereo audio codec with 105dB dynamic range ADC and 114dB dynamic range DAC
  • TAC5112-Q1 — Automotive low-power stereo audio codec with 105dB dynamic range ADC, 114dB dynamic range DAC
  • TAC5312-Q1 — Automotive stereo audio codec with 104dB ADC 114dB DAC, high-voltage input, mic bias & diagnostics
  • TAC5212 — High-performance stereo audio codec with 119dB dynamic range ADC and 120dB dynamic range DAC
Audio DACs
  • TAD5212 — High-performance stereo audio DAC with 120dB dynamic range, and headphone and line driver
  • TAD5112 — Low-power stereo audio DAC with 110dB dynamic range, and headphone and line driver
  • TAD5212-Q1 — Automotive high-performance stereo audio DAC with 120dB dynamic range and headphone & line driver
  • TAD5112-Q1 — Automotive low-power stereo audio DAC with 110dB dynamic range and headphone & line driver
Audio ADCs
  • TAA5212 — High-performance stereo audio ADC with 119dB dynamic range and configurable digital filters
  • TAA5412-Q1 — Automotive stereo audio ADC with 112dB dynamic range, high-voltage input, mic bias and diagnostics
Download options
Support software

TAC5X1X-Q1-SW — TAx5x1x-Q1 files. Requires PUREPATHCONSOLE installed.

TAx5x1x-Q1 files. Requires PUREPATHCONSOLE installed.
Supported products & hardware

Supported products & hardware

Products
Audio CODECs
  • TAC5112 — Low-power stereo audio codec with 105dB dynamic range ADC and 114dB dynamic range DAC
  • TAC5111 — Low-power mono audio codec with 105dB dynamic range ADC and 114dB dynamic range DAC
  • TAC5111-Q1 — Automotive low-power mono audio codec with 105dB dynamic range ADC, 114dB dynamic range DAC
  • TAC5112-Q1 — Automotive low-power stereo audio codec with 105dB dynamic range ADC, 114dB dynamic range DAC
  • TAC5212 — High-performance stereo audio codec with 119dB dynamic range ADC and 120dB dynamic range DAC
  • TAC5211 — High-performance mono audio codec with 119dB dynamic range ADC and 120dB dynamic range DAC
  • TAC5412-Q1 — Automotive stereo audio codec with 112dB ADC, 120dB DAC, high-voltage input, mic bias & diagnostics
  • TAC5301-Q1 — Automotive mono audio codec with 101dB ADC, 110dB DAC and programmable high-voltage mic bias
  • TAC5311-Q1 — Automotive mono audio codec with 104dB ADC, 114dB DAC, high-voltage input, mic bias & diagnostics
  • TAC5312-Q1 — Automotive stereo audio codec with 104dB ADC 114dB DAC, high-voltage input, mic bias & diagnostics
Audio DACs
  • TAD5212 — High-performance stereo audio DAC with 120dB dynamic range, and headphone and line driver
  • TAD5212-Q1 — Automotive high-performance stereo audio DAC with 120dB dynamic range and headphone & line driver
  • TAD5112 — Low-power stereo audio DAC with 110dB dynamic range, and headphone and line driver
  • TAD5112-Q1 — Automotive low-power stereo audio DAC with 110dB dynamic range and headphone & line driver
Audio ADCs
  • TAA5212 — High-performance stereo audio ADC with 119dB dynamic range and configurable digital filters
  • TAA5412-Q1 — Automotive stereo audio ADC with 112dB dynamic range, high-voltage input, mic bias and diagnostics
Hardware development
Evaluation board
Request
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Package Pins CAD symbols, footprints & 3D models
VQFN (RGE) 24 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos