Home
Design & development

DRV8889-Q1EVM

DRV8889-Q1 automotive stepper driver with 1/256 microstepping and stall detection evaluation module

Order now

DRV8889-Q1EVM

Order now

Overview

The DRV8889-Q1 evaluation module (EVM) allows easy evaluation of the DRV8889-Q1 device. The DRV8889-Q1 device is an integrated, dual H-bridge driver for automotive stepper motor applications.

The evaluation module allows the device to be configured for all of its functional modes including microstepping down to 1/256 step resolution, multiple decay modes for smart tuning, stall detection, and slip detection. An MSP430F2617 on the board provides the STEP, DIR (direction), and SPI signals to control the DRV8889-Q1. These settings are configured in the downloadable device GUI available for this EVM.

For more information on this evaluation module please refer to the DRV8889-Q1EVM hardware and GUI user guides.

Features
  • 4.5-V to 40-V operating voltage range
  • Full stepping and microstepping modes down to 1/256
  • Programmable decay modes for stepper tuning, including dynamic decay and ripple control smart tuning modes
  • Stall detection
  • Slip detection

  • DRV8889-Q1EVM board
  • USB cable

Stepper motor drivers
DRV8889-Q1 — Automotive, 50-V, 1.5-A, bipolar stepper motor driver w/integrated current sensing & stall detection

 

MSP430 microcontrollers
MSP430F2617 — 16 MHz MCU with 92KB Flash, 8KB SRAM, 12-bit ADC, Dual 12-bit DAC, I2C/SPI/UART, HW multiplier, DMA
Download View video with transcript Video

Get started

  1. Order the DRV8889-Q1EVM evaluation module
  2. Download the DRV8889-Q1 software
  3. Read the user guide

Order & start development

Evaluation board

DRV8889-Q1EVM — DRV8889-Q1 automotive stepper driver with 1/256 microstepping and stall detection evaluation module

Log in to order
lock Log in to view inventory
In stock / Out of stock
Limit:
Not available on TI.com
GUI for evaluation module (EVM)

DRV8889-Q1EVM-GUI-CLOUD — DRV88x9-Q1 GUI on TI Resource Explorer Cloud

Evaluate in the cloud
Getting started

MSP-MOTOR-CONTROL — MSP firmware solutions for motor control

Supported products & hardware
Get started
Download options

MSP-MOTOR-CONTROL — MSP firmware solutions for motor control

close
Latest version
Version: 2.2.0
Release date: 29 Aug 2024
open-in-new Release notes
open-in-new View all versions
Get started
download PMSM Sensorless FOC Firmware (MSPM0Gx5xx)  — 0 K

Sensorless FOC firmware for MSPM0Gx5xx + Motor Driver solutions

download PMSM HALL Sensored FOC Firmware (MSPM0Gx5xx)  — 0 K

Hall Sensor Based FOC firmware for MSPM0Gx5xx + Motor Driver solutions

Checksum
download BLDC Sensored Trap Firmware (MSPM0G)  — 0 K

BLDC sensored trap firmware for MSPM0G + DRV83xx motor drivers

download BLDC Sensored Trap Firmware (MSPM0L)  — 0 K

BLDC sensored trap firmware for MSPM0L + DRV83xx motor drivers

download Stepper Firmware (MSPM0L)  — 0 K

Stepper motor firmware for MSPM0L + DRV8xxx motor drivers

download Brushed-DC Firmware (MSPM0L)  — 0 K

Brushed-DC firmware for MSPM0L + DRV8xxx motor drivers
Products
Arm Cortex-M0+ MCUs
MSPM0G1105 — 80MHz Arm® Cortex®-M0+ MCU with 32KB flash 16KB SRAM 2×12bit 4Msps ADC, op-amp MSPM0G1106 — 80MHz Arm® Cortex®-M0+ MCU with 64KB flash 32KB SRAM 2x12-bit 4Msps ADC, op-amp MSPM0G1107 — 80MHz Arm® Cortex®-M0+ MCU with 128KB flash 32KB SRAM 2x12-bit 4Msps ADC, op-amp MSPM0G1505 — 80MHz Arm® Cortex®-M0+ MCU with 32KB flash 16KB SRAM 2x4Msps ADC, 12-bit DAC, 3xCOMP, 2xOPA, MATHACL MSPM0G1506 — 80MHz Arm® Cortex®-M0+ MCU with 64KB flash 32KB SRAM 2x4Msps ADC, 12-bit DAC, 3xCOMP, 2xOPA, MATHACL MSPM0G1507 — 80MHz Arm® Cortex®-M0+ MCU with 128KB flash 32KB SRAM 2x4Msps ADC, 12-bit DAC, 3xCOMP, 2xOPA, MATHAC MSPM0G3105 — 80MHz Arm® Cortex®-M0+ MCU with 32KB flash 16KB SRAM 2x12-bit 4Msps ADC, op-amp, CAN-FD MSPM0G3105-Q1 — Automotive 80MHz Arm® Cortex®-M0+ MCU with 32KB flash 16KB SRAM 2×12bit 4Msps ADC, op-amp, CAN-FD MSPM0G3106 — 80MHz Arm® Cortex®-M0+ MCU with 64KB flash 32KB SRAM 2x12-bit 4Msps ADC, op-amp, CAN-FD MSPM0G3106-Q1 — Automotive 80MHz Arm® Cortex®-M0+ MCU with 64KB flash 32KB SRAM 2×12bit 4Msps ADC, op-amp, CAN-FD MSPM0G3107 — 80MHz Arm® Cortex®-M0+ MCU with 128KB flash 32KB SRAM 2x12-bit 4Msps ADC, op-amp, CAN-FD MSPM0G3107-Q1 — Automotive 80MHz Arm® Cortex®-M0+ MCU with 128KB flash 32KB SRAM 2×12bit 4Msps ADC, op-amp, CAN-FD MSPM0G3505 — 80MHz Arm® Cortex®-M0+ MCU with 32KB flash 16KB SRAM 2x4Msps ADC, DAC, 3xCOMP, 2xOPA, CAN-FD, MAT MSPM0G3505-Q1 — Automotive 80MHz Arm® Cortex®-M0+ MCU with 32KB flash 16KB SRAM ADC, DAC, COMP, OPA, CAN-FD, MATHACL MSPM0G3506 — 80MHz Arm® Cortex®-M0+ MCU with 64KB flash 32KB SRAM 2x4Msps ADC, DAC, 3xCOMP, 2xOPA, CAN-FD, MATHAC MSPM0G3506-Q1 — Automotive 80MHz Arm® Cortex®-M0+ MCU with 64KB flash 32KB SRAM ADC, DAC, COMP, OPA, CAN-FD, MATHACL MSPM0G3507 — 80MHz Arm® Cortex®-M0+ MCU with 128KB flash 32KB SRAM 2x4Msps ADC, DAC, 3xCOMP, 2xOPA, CAN-FD, MATHA MSPM0G3507-Q1 — Automotive 80MHz Arm® Cortex®-M0+ MCU with 128KB flash 32KB SRAM ADC, DAC, COMP, OPA, CAN-FD, MATHAC MSPM0G3519 — 80 MHz ARM® Cortex®-M0+ MCU with dual-bank 512kB flash, 128kB SRAM, 2xCAN-FD, 2xADC, DAC, COMP MSPM0L1303 — 32-MHz Arm® Cortex®-M0+ MCU with 8-KB flash, 2-KB SRAM, 12-bit ADC, comparator, OPA MSPM0L1304 — 32-MHz Arm® Cortex®-M0+ MCU with 16-KB flash, 2-KB SRAM, 12-bit ADC, comparator, OPA MSPM0L1304-Q1 — Automotive 32-Mhz Arm® Cortex®-M0+ with 16-KB flash, 2-KB RAM, 12-bit ADC,OPA, LIN MSPM0L1305 — 32-MHz Arm® Cortex®-M0+ MCU with 32-KB flash, 4-KB SRAM, 12-bit ADC, comparator, OPA MSPM0L1305-Q1 — Automotive 32-Mhz Arm® Cortex®-M0+ with 32-KB flash, 4-KB RAM, 12-bit ADC, OPA, LIN MSPM0L1306 — 32-MHz Arm® Cortex®-M0+ MCU with 64-KB flash, 4-KB SRAM, 12-bit ADC, comparator, OPA MSPM0L1306-Q1 — Automotive 32-Mhz Arm® Cortex®-M0+ with 64-KB flash, 4-KB RAM, 12-bit ADC, OPA,LIN MSPM0L1343 — 32-MHz Arm® Cortex®-M0+ MCU with 8-KB flash, 2-KB SRAM, 12-bit ADC, comparator, TIA MSPM0L1344 — 32-MHz Arm® Cortex®-M0+ MCU with 16-KB flash, 2-KB SRAM, 12-bit ADC, comparator, TIA MSPM0L1345 — 32-MHz Arm® Cortex®-M0+ MCU with 32-KB flash, 4-KB SRAM, 12-bit ADC, comparator, TIA MSPM0L1346 — 32-MHz Arm® Cortex®-M0+ MCU with 64-KB flash, 4-KB SRAM, 12-bit ADC, comparator, TIA
BLDC drivers
DRV8300 — 100-V max simple 3-phase gate driver with bootstrap diodes DRV8300-Q1 — Automotive 100-V max simple 3-phase gate driver with bootstrap diodes DRV8300U — 100-V max, simple three-phase gate driver with bootstrap diodes and enhanced UVLO protection DRV8311 — 24-V abs max, 3 to 20-V, three-phase brushless-DC motor driver with integrated FETs DRV8316 — 40-V max 8-A peak 3-phase motor driver with integrated current sensing and integrated FETs DRV8316-Q1 — Automotive 40-V max 8-A peak three-phase motor driver with integrated current sensing DRV8316C-Q1 — Automotive 40-V max 8-A peak three-phase motor driver with integrated current sensing DRV8317 — 24-V max 5-A peak three-phase motor driver with integrated FETs and current sensing DRV8323 — 65-V max 3-phase smart gate driver with current shunt amplifiers DRV8323R — 65-V max 3-phase smart gate driver with buck regulator & current shunt amplifiers DRV8328 — 60 V 1000/2000 mA 3-phase gate driver DRV8329 — 60V three-phase gate driver with single current-sense amplifier DRV8353 — 102-V max 3-phase smart gate driver with current shunt amplifiers DRV8353F — 102-V max 3-phase Functional Safety Quality-Managed smart gate driver with 3x CSA DRV8353R — 102-V max 3-phase smart gate driver with buck regulator & current shunt amplifiers
Stepper motor drivers
DRV8411A — 1.65V-to-11V, 4A dual H-bridge motor driver with IPROPI current regulation DRV8889-Q1 — Automotive, 50-V, 1.5-A, bipolar stepper motor driver w/integrated current sensing & stall detection
Brushed DC (BDC) motor drivers
DRV8706-Q1 — Automotive 40-V H-bridge smart gate driver with offline diagnostics & inline current sense am
Hardware development
Evaluation board
BOOSTXL-DRV8323RH — DRV8323RH Three-Phase Smart Gate Driver With Buck, Shunt Amps (Hardware Interface) Evaluation Module BOOSTXL-DRV8323RS — DRV8323RS three-phase smart gate driver with buck, shunt amps (SPI interface) evaluation module DRV8300DIPW-EVM — DRV8300DIPW evaluation module for three-phase BLDC DRV8300DRGE-EVM — DRV8300DRGE three phase BLDC evaluation module DRV8311HEVM — DRV8311H three-phase PWM motor driver evaluation module DRV8316REVM — DRV8316R three-phase PWM motor driver evaluation module DRV8317HEVM — DRV8317 evaluation module for three-phase brushless DC (BLDC) gate driver DRV8328AEVM — DRV8328A three-phase PWM motor driver evaluation module DRV8329AEVM — DRV8329A evaluation module for three-phase BLDC gate driver DRV8353RH-EVM — DRV8353RH evaluation module, three-phase brushless DC smart gate driver DRV8353RS-EVM — DRV8353RS evaluation module, three-phase brushless DC smart gate driver  DRV8411AEVM — DRV8411A evaluation module for dual H-bridge motor driver with current regulation DRV8706S-Q1EVM — Automotive H-bridge smart gate driver EVM with wide common mode current sense amplifier DRV8889-Q1EVM — DRV8889-Q1 automotive stepper driver with 1/256 microstepping and stall detection evaluation module LP-MSPM0G3507 — MSPM0G3507 LaunchPad™ development kit for 80-MHz Arm® Cortex®-M0+ MCU LP-MSPM0G3519 — MSPM0G3519 LaunchPad™ development kit for 80MHz Arm® Cortex®-M0+ MCU LP-MSPM0L1306 — MSPM0L1306 LaunchPad™ development kit for 32-MHz Arm® Cortex®-M0+ MCU

Documentation

open-in-new MSPM0 Motor Control Application Note

MSPM0 Motor Control Application Note

open-in-new MSPM0 Sensorless FOC Tuning Guide

Tuning Guide for MSPM0 based Sensorless FOC

open-in-new MSPM0 BLDC Sensorless FOC Documentation

MSPM0 BLDC Sensorless FOC Documentation

open-in-new MSPM0 Hall Sensored FOC Tuning Guide

Application Tuning Guide for MSPM0 Based Hall Sensor FOC

open-in-new MSPM0 BLDC Sensored Trap Control Documentation

MSPM0 BLDC Sensored Trap Control Documentation

open-in-new MSPM0 Stepper Motor Control Documentation

MSPM0 Stepper Motor Control Documentation

open-in-new MSPM0 Brushed Motor Control Documentation

MSPM0 Brushed Motor Control Documentation

open-in-new MSPM0_SDK_2.02.00.xx_manifest.html

open-in-new MSPM0_HALL_SENSORED_FOC_SW_1.00.00_manifest.html

open-in-new MSPM0_SENSORLESS_FOC_SW_2.02.00.00_manifest.html

Release Infomation

MSP Motor Control is a collection of software, tools, and examples to spin motors in 30 minutes or less with MSPM0 Arm Cortex M0+ MCUs and popular motor driver solutions. 

MSP Motor Control provides examples for supported hardware kits to spin brushed, stepper, and 3-phase motors with sensored and sensorless control algorithms optimized for performance, integration, and ease-of-use. Spin your motor today by ordering hardware, connecting a motor, and using our Graphical User Interfaces or online code examples.

MSP Motor Control includes:

  • Complete software and evaluation ecosystem for MSPM0 MCU motor control applications inside MSPM0-SDK
  • Support for brushed, stepper, and 3-phase motors with sensored and sensorless algorithms using MSPM0L/MSPM0G devices
  • Getting started collateral to spin a motor in 30 minutes or less optimized for efficiency, power delivery, or speed/torque control 
  • Solutions for field-oriented control (FOC) with a comprehensive suite of features optimized for motor performance
  • Hardware support for reference designs, MSPM0 LaunchPads and TI's portfolio of DRV8xxx motor drivers
  • Future support for code-free GUI-based motor control, communication interfaces, and automatic tuning

 

What's new

  • Hall Sensor Based FOC and Sensorless Field Oriented Control.
  • Support for BLDC & PMSM motors in Three Shunt, Two Shunt and Single Shunt Configurations
  • Initial Speed detection and Initial Position detection feature support
  • Configurable Start up and Stop options to meet wide range of application needs.
  • Dead Time Compensation for best acoustic performance at lower Motor speeds.
  • Maximum Torque Per Ampere algorithm for efficiently driving Salient PMSM Motors
  • Field Weakening to spin the motors beyond the Rated Speeds.
  • Speed Control, Power Control, Torque Control and Voltage Control modes.
  • Evaluation Motor Control GUI to quickly Tune and Test your motors.
Support software

SLVC796 — DRV8889-Q1EVM Software

Supported products & hardware
Download

SLVC796 — DRV8889-Q1EVM Software

close
Latest version
Version: 01.00.00.0B
Release date: 08 Dec 2019
open-in-new View all versions
download DRV8889-Q1EVM Software (zip)  — 110884 K

Checksum
Hardware development
Evaluation board
DRV8889-Q1EVM — DRV8889-Q1 automotive stepper driver with 1/256 microstepping and stall detection evaluation module

Release Infomation

The design resource accessed as www.ti.com/lit/zip/slvc796 or www.ti.com/lit/xx/slvc796b/slvc796b.zip has been migrated to a new user experience at www.ti.com/tool/download/SLVC796. Please update any bookmarks accordingly.
TI's Standard Terms and Conditions for Evaluation Items apply.

Design files

download DRV8889-Q1EVM Design Files
SLVC795.ZIP (2112 KB)

Technical documentation

star
= Top documentation selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* EVM User's guide DRV8889-Q1 Evaluation Module User's Guide 17 Apr 2019
Certificate DRV8889-Q1EVM EU Declaration of Conformity (DoC) (Rev. A) 07 Nov 2019
More literature DRV8889-Q1EVM Software User's Guide (Rev. A) 10 Oct 2019

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​

Videos