Home Battery management ICs Battery monitors & balancers
Home
Battery management ICs
Battery monitors & balancers

BQ79606A-Q1

ACTIVE

6-S automotive precision battery monitor, balancer and integrated protector with ASIL-D compliance

Order now
Data sheet

A newer version of this product is available

open-in-new Compare alternates
Same functionality with different pin-out to the compared device
BQ79616-Q1 ACTIVE 16-S automotive precision battery monitor, balancer and integrated protector with ASIL-D compliance ASIL-D compliant with improved cell voltage measurements within 200 µs for all cell channels and balancing current up to 240 mA

BQ79606A-Q1

ACTIVE
Data sheet Order now

Product details

Rating Automotive Number of series cells (max) 6 Number of series cells (min) 3 Features Cell balancing, Integrated ADC, Multi-cell support, Open-wire detection, Overtemperature protection, Overvoltage protection, Separate MCU requirement, Stackable (built-in interface), Temperature sensing, Undertemperature protection, Undervoltage protection Vin (max) (V) 33 Communication interface Differential Daisy Chain, UART Device type Cell monitor and balancer Operating temperature range (°C) -40 to 105 Battery overvoltage protection (min) (V) 2 Battery overvoltage protection (max) (V) 5 TI functional safety category Functional Safety-Compliant Operating current (typ) (µA) 4200
Rating Automotive Number of series cells (max) 6 Number of series cells (min) 3 Features Cell balancing, Integrated ADC, Multi-cell support, Open-wire detection, Overtemperature protection, Overvoltage protection, Separate MCU requirement, Stackable (built-in interface), Temperature sensing, Undertemperature protection, Undervoltage protection Vin (max) (V) 33 Communication interface Differential Daisy Chain, UART Device type Cell monitor and balancer Operating temperature range (°C) -40 to 105 Battery overvoltage protection (min) (V) 2 Battery overvoltage protection (max) (V) 5 TI functional safety category Functional Safety-Compliant Operating current (typ) (µA) 4200
HTQFP (PHP) 48 81 mm² 9 x 9
  • Qualified for automotive applications
  • AEC-Q100 Qualified with the following results:
    • Device temperature grade 2: –40°C to +105°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • Voltage monitor, temperature monitor and communication functions: SafeTI™-26262 ASIL-D compliant
  • ± 1.1mV Cell voltage measurement accuracy with an offset
  • Configurable digital low pass filter as low as 1.2Hz
  • Supports simultaneous cell voltage measurements
    • Full-accuracy stack measurements in less than 1 ms (for 96 cells)
  • Optional ring architecture to ensure stack communication even with communication cable break
  • Monitors 3 to 6 cell connections and up to 6 NTC/auxiliary channels
    • Integrated 16-bit analog-to-digital converters (ADC)
  • Integrated high-voltage AFE filter components
  • Designed for robust hot-plug performance
  • Stackable configuration up to 64 devices (1 base + 63 stack, 384-series cells)
  • Isolated differential daisy chain communication
    • Supports transformer or capacitor based isolation
  • Configurable SINC3 digital filter
  • Integrated hardware protector
    • Secondary protection for cell overtemperature and undertemperature
    • Secondary protection for cell overvoltage and undervoltage
  • Hardware protector function: SafeTI™-26262 ASIL-B compliant
  • Integrated cell-balancing MOSFET’s up to 150 mA
  • Designed to pass BCI testing
  • UART Host interface
  • Qualified for automotive applications
  • AEC-Q100 Qualified with the following results:
    • Device temperature grade 2: –40°C to +105°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • Voltage monitor, temperature monitor and communication functions: SafeTI™-26262 ASIL-D compliant
  • ± 1.1mV Cell voltage measurement accuracy with an offset
  • Configurable digital low pass filter as low as 1.2Hz
  • Supports simultaneous cell voltage measurements
    • Full-accuracy stack measurements in less than 1 ms (for 96 cells)
  • Optional ring architecture to ensure stack communication even with communication cable break
  • Monitors 3 to 6 cell connections and up to 6 NTC/auxiliary channels
    • Integrated 16-bit analog-to-digital converters (ADC)
  • Integrated high-voltage AFE filter components
  • Designed for robust hot-plug performance
  • Stackable configuration up to 64 devices (1 base + 63 stack, 384-series cells)
  • Isolated differential daisy chain communication
    • Supports transformer or capacitor based isolation
  • Configurable SINC3 digital filter
  • Integrated hardware protector
    • Secondary protection for cell overtemperature and undertemperature
    • Secondary protection for cell overvoltage and undervoltage
  • Hardware protector function: SafeTI™-26262 ASIL-B compliant
  • Integrated cell-balancing MOSFET’s up to 150 mA
  • Designed to pass BCI testing
  • UART Host interface

The BQ79606A-Q1 device provides simultaneous, high accuracy, channel measurements for three to six battery cells. With the inclusion of a daisy chain communication port, the BQ79606A-Q1 device is stackable (up to 64 devices) to support the large stack configurations found in battery packs for electrified automotive drive trains. Providing a Delta Sigma converter per cell input, the BQ79606A-Q1 allows simultaneous measurement of the battery voltages.

The BQ79606A-Q1 includes an auxiliary ADC that supports cell temperature measurements for up to six NTCs as well as internal rails to enable safety checks for the device. A die temperature measurement ADC is also included to provide temperature correction to enable high accuracy results over an extended temperature range.

Host communication to the BQ79606A-Q1 device is done via dedicated UART interface. Additionally, an isolated, differential daisy-chain communication interface that supports either capacitor or transformer isolation allows the host to communicate with the entire battery stack. The daisy-chain communication interface can be configured (optional) in a ring architecture that allows the host to talk to devices at either end of the stack in cases of communication line breaks.

The BQ79606A-Q1 device provides simultaneous, high accuracy, channel measurements for three to six battery cells. With the inclusion of a daisy chain communication port, the BQ79606A-Q1 device is stackable (up to 64 devices) to support the large stack configurations found in battery packs for electrified automotive drive trains. Providing a Delta Sigma converter per cell input, the BQ79606A-Q1 allows simultaneous measurement of the battery voltages.

The BQ79606A-Q1 includes an auxiliary ADC that supports cell temperature measurements for up to six NTCs as well as internal rails to enable safety checks for the device. A die temperature measurement ADC is also included to provide temperature correction to enable high accuracy results over an extended temperature range.

Host communication to the BQ79606A-Q1 device is done via dedicated UART interface. Additionally, an isolated, differential daisy-chain communication interface that supports either capacitor or transformer isolation allows the host to communicate with the entire battery stack. The daisy-chain communication interface can be configured (optional) in a ring architecture that allows the host to talk to devices at either end of the stack in cases of communication line breaks.
filter Find other Battery monitors & balancers
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 14
Type Title Date
* Data sheet BQ79606A-Q1 SafeTI™ Precision Monitor With Integrated Hardware Protector for Automotive Battery Pack Applications datasheet PDF | HTML 25 Apr 2019
White paper 유선 통신과 무선 통신 비교 - EV 배터리 관리 (Rev. A) PDF | HTML 15 Jun 2023
White paper Wired vs. Wireless Communications In EV Battery Management (Rev. A) PDF | HTML 06 Jun 2023
Functional safety information Functional Safety Considerations in Battery Management for Vehicles 17 Sep 2020
White paper 차량 전기화를 위한 배터리 관리시 기능적 안전성 고려 사항 17 Sep 2020
Application note BQ79606A-Q1 Software Design Reference (Rev. E) 07 Aug 2019
Application note BQ79606 Daisy Chain Communication Robustness and Timing 26 Jun 2019
Technical article Eight questions about monitoring and protection in hybrid and electric vehicles PDF | HTML 22 May 2019
Functional safety information Safety Manual for BQ79606A-Q1 Precision Monitor (Rev. C) 06 May 2019
Design guide Scalable Automotive HEV/EV 6s to 96s Li-Ion Cell Supervision Demonstrator (Rev. A) 30 Apr 2019
User guide BQ79606A-Q1 GUI User's Guide (Rev. C) 29 Apr 2019
Application note BQ79606A-Q1 Design Recommendation (Rev. C) 26 Apr 2019
User guide BQ79606A-Q1 Evaluation Module (Rev. E) 26 Apr 2019
Application note BQ79606AA-Q1 Example Bring Up Procedure 16 Mar 2018

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

BQ79606EVM-897 — 6-Channel precision monitor with integrated protector evaluation module

The bq79606EVM is an evaluation board for the bq79606A -Q1. The bq79606A -Q1 provides simultaneous, high accuracy, channel measurements for three to six battery cells. With the inclusion of a daisy chain communication port, the bq79606A -Q1 device is stackable (up to 64 devices) to support the (...)

User guide: PDF
Not available on TI.com
Code example or demo

BQ79606A-EXAMPLE-CODE — BQ79606A-Q1 example code of automotive battery pack applications

The BQ79606A-EXAMPLE-CODE is BQ79606A-Q1 example code of automotive battery pack applications for the Hercules™ LAUNCHXL-TMS57004 LaunchPad™ development kit.
Download
Driver or library

BQ79606-Q1-DESIGN — Design & Other Doc Files for BQ79606-Q1

Design & Other Doc Files for BQ79606-Q1
Supported products & hardware

Supported products & hardware

Products
Battery monitors & balancers
  • BQ79606A-Q1 — 6-S automotive precision battery monitor, balancer and integrated protector with ASIL-D compliance
Request
Driver or library

BQ79606-Q1-EXAMPLE-CODE — Example Code Files for BQ79606-Q1

Example Code Files for BQ79606-Q1
Supported products & hardware

Supported products & hardware

Products
Battery monitors & balancers
  • BQ79606A-Q1 — 6-S automotive precision battery monitor, balancer and integrated protector with ASIL-D compliance
Request
Driver or library

BQ79606A-AUTOSAR-CDD — BQ79606A Complex Device Driver software

BQ79606A Complex Device Driver software
Supported products & hardware

Supported products & hardware

Products
Battery monitors & balancers
  • BQ79606A-Q1 — 6-S automotive precision battery monitor, balancer and integrated protector with ASIL-D compliance
Request
Driver or library

BQ79606A-Q1-FMEDA — BQ79606A-Q1 FMEDA files

BQ79606A-Q1 FMEDA files
Supported products & hardware

Supported products & hardware

Products
Battery monitors & balancers
  • BQ79606A-Q1 — 6-S automotive precision battery monitor, balancer and integrated protector with ASIL-D compliance
Request
Simulation tool

MNOVA-3P-NOVACARTS — MicroNova NovaCarts cell module controller (CMC) simulator for validating battery management systems

The NovaCarts cell module controller (CMC) simulation can simulate up to 35 cell monitoring integrated circuits of the automotive battery cell monitors family. The simulator is connected to the battery management system (BMS) host via a daisy chain interface. Typical applications of the simulator (...)
From: MicroNova
Visit partner site
Package Pins CAD symbols, footprints & 3D models
HTQFP (PHP) 48 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos