All trademarks are the property of their respective owners.
The DS10BR254 is a 1.5 Gbps 1:4 LVDS repeater optimized for high-speed signal routing and distribution over FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure exceptional signal integrity and noise immunity.
The device has two different LVDS input channels and a select pin determines which input is active. A loss-of-signal (LOS) circuit monitors both input channels and a unique LOS pin is asserted when no signal is detected at that input.
Wide input common mode range allows the switch to accept signals with LVDS, CML and LVPECL levels; the output levels are LVDS. A very small package footprint requires a minimal space on the board while the flow-through pinout allows easy board layout. Each differential input and output is internally terminated with a 100Ω resistor to lower device return losses, reduce component count and further minimize board space.
| Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | DS10BR254 1.5 Gbps 1:4 LVDS Repeater datasheet (Rev. D) | 12 Apr 2013 |
For additional terms or required resources, click any title below to view the detail page where available.
The DDC2256AEVM evaluation module (EVM) is an evaluation kit for the DDC2256A, a 256-channel, current input, 24-bit analog-to-digital (A/D) converter. The EVM kit, comprised of a DUT board and a capture board, contains two DDC2256A (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| WQFN (RTA) | 40 | Ultra Librarian |
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.