ISO7321-Q1

Name: ISO7321-Q1
Brand: TI
SKU: ISO7321-Q1
Price: 4.388 USD

ACTIVE

Automotive, low-power, dual-channel, 1/1, 25-Mbps digital isolator

Order now

Data sheet

document-pdfAcrobat ISO732x-Q1 Robust EMC, Low Power, Dual-Channel Digital Isolators datasheet PDF | HTML

A newer version of this product is available

open-in-new

Compare alternates

Pin-for-pin with same functionality to the compared device

ISO6721-Q1

ACTIVE

Automotive, general-purpose, dual-channel, 1/1 digital isolator Supports 50-Mbps data rate

ISO7321-Q1

ACTIVE

Data sheet

Order now

Product details

Rating

Automotive

Integrated isolated power

No

Number of channels

2

Forward/reverse channels

1 forward / 1 reverse

Data rate (max) (Mbps)

25

Protocols

GPIO, PWM, SPI

Propagation delay time (typ) (ns)

31

Isolation rating

Basic

Withstand isolation voltage (VISO) (Vrms)

3000

Surge isolation voltage (VIOSM) (kVPK)

7.8

CMTI (min) (kV/µs)

25

Default output

High, Low

Creepage (min) (mm)

4

Current consumption per channel (DC) (typ) (mA)

1.2

Current consumption per channel (1 Mbps) (typ) (mA)

1.2

Supply voltage (min) (V)

3.3

Supply voltage (max) (V)

5

Operating temperature range (°C)

-40 to 125

Transient isolation voltage (VIOTM) (VPK)

4242

Clearance (min) (mm)

4

Rating

Automotive

Integrated isolated power

No

Number of channels

2

Forward/reverse channels

1 forward / 1 reverse

Data rate (max) (Mbps)

25

Protocols

GPIO, PWM, SPI

Propagation delay time (typ) (ns)

31

Isolation rating

Basic

Withstand isolation voltage (VISO) (Vrms)

3000

Surge isolation voltage (VIOSM) (kVPK)

7.8

CMTI (min) (kV/µs)

25

Default output

High, Low

Creepage (min) (mm)

4

Current consumption per channel (DC) (typ) (mA)

1.2

Current consumption per channel (1 Mbps) (typ) (mA)

1.2

Supply voltage (min) (V)

3.3

Supply voltage (max) (V)

5

Operating temperature range (°C)

-40 to 125

Transient isolation voltage (VIOTM) (VPK)

4242

Clearance (min) (mm)

4

SOIC (D)

8

29.4 mm² 4.9 x 6

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
- Device HBM Classification Level 3A
- Device CDM Classification Level C6
Signaling Rate: 25 Mbps
Integrated Noise Filter on the Inputs
Default Output and Options
Low Power Consumption: Typical I_CC per Channel at 1 Mbps:
- ISO7320-Q1: 1.2 mA (5-V Supplies),
  0.9 mA (3.3-V Supplies)
- ISO7321-Q1: 1.7 mA (5-V Supplies),
  1.2 mA (3.3-V Supplies)
Low Propagation Delay: 33 ns
Typical (5-V Supplies)
3.3-V and 5-V Level Translation
65-kV/μs Transient Immunity,
Typical (5-V Supplies)
Robust Electromagnetic Compatibility (EMC)
- System-level ESD, EFT, and Surge Immunity
- Low Emissions
Isolation Barrier Life: > 25 Years
Operates from 3.3-V and 5-V Supplies
Narrow Body SOIC-8 Package
Safety and Regulatory Approvals:
- 4242-V_PK Isolation per DIN V VDE V 0884-10 and DIN EN 61010-1
- 3000-V_RMS Isolation for 1 minute per UL 1577
- CSA Component Acceptance Notice 5A, IEC 60950-1 and IEC 61010-1 Standards
- Planned CQC Certification per GB4943.1-2011

All trademarks are the property of their respective owners.

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
- Device HBM Classification Level 3A
- Device CDM Classification Level C6
Signaling Rate: 25 Mbps
Integrated Noise Filter on the Inputs
Default Output and Options
Low Power Consumption: Typical I_CC per Channel at 1 Mbps:
- ISO7320-Q1: 1.2 mA (5-V Supplies),
  0.9 mA (3.3-V Supplies)
- ISO7321-Q1: 1.7 mA (5-V Supplies),
  1.2 mA (3.3-V Supplies)
Low Propagation Delay: 33 ns
Typical (5-V Supplies)
3.3-V and 5-V Level Translation
65-kV/μs Transient Immunity,
Typical (5-V Supplies)
Robust Electromagnetic Compatibility (EMC)
- System-level ESD, EFT, and Surge Immunity
- Low Emissions
Isolation Barrier Life: > 25 Years
Operates from 3.3-V and 5-V Supplies
Narrow Body SOIC-8 Package
Safety and Regulatory Approvals:
- 4242-V_PK Isolation per DIN V VDE V 0884-10 and DIN EN 61010-1
- 3000-V_RMS Isolation for 1 minute per UL 1577
- CSA Component Acceptance Notice 5A, IEC 60950-1 and IEC 61010-1 Standards
- Planned CQC Certification per GB4943.1-2011

All trademarks are the property of their respective owners.

The ISO732x-Q1 family of devices provides galvanic isolation up to 3000 V_RMS for 1 minute per UL 1577 and 4242 V_PKper VDE V 0884-10. These devices have two isolated channels comprised of logic input and output buffers separated by silicon dioxide (SiO₂) insulation barriers.

The ISO7320-Q1 has both channels in the same direction while ISO7321-Q1 has the two channels in opposite direction. In case of input power or signal loss, the default output is for orderable part numbers with suffix and for orderable part numbers without suffix . See for more information. Used in conjunction with isolated power supplies, these devices prevent noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry. The ISO732x-Q1 family of devices has integrated noise filters for harsh industrial environment where short noise pulses may be present at the device input pins. The ISO732x-Q1 family of devices has TTL input thresholds and operate from 3-V to 5.5-V supply levels.

Through innovative chip design and layout techniques, electromagnetic compatibility of the ISO732x-Q1 family of devices has been significantly enhanced to enable system-level ESD, EFT, Surge and Emissions compliance.

For all available packages, see the orderable addendum at the end of the datasheet.

The ISO732x-Q1 family of devices provides galvanic isolation up to 3000 V_RMS for 1 minute per UL 1577 and 4242 V_PKper VDE V 0884-10. These devices have two isolated channels comprised of logic input and output buffers separated by silicon dioxide (SiO₂) insulation barriers.

The ISO7320-Q1 has both channels in the same direction while ISO7321-Q1 has the two channels in opposite direction. In case of input power or signal loss, the default output is for orderable part numbers with suffix and for orderable part numbers without suffix . See for more information. Used in conjunction with isolated power supplies, these devices prevent noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry. The ISO732x-Q1 family of devices has integrated noise filters for harsh industrial environment where short noise pulses may be present at the device input pins. The ISO732x-Q1 family of devices has TTL input thresholds and operate from 3-V to 5.5-V supply levels.

Through innovative chip design and layout techniques, electromagnetic compatibility of the ISO732x-Q1 family of devices has been significantly enhanced to enable system-level ESD, EFT, Surge and Emissions compliance.

For all available packages, see the orderable addendum at the end of the datasheet.

filter

Find other Digital isolators

Download View video with transcript Video

Technical documentation

star

=Top documentation for this product selected by TI

No results found. Please clear your search and try again.

View all 9

Top documentation	Type	Title	Format options	Date
*	Data sheet	ISO732x-Q1 Robust EMC, Low Power, Dual-Channel Digital Isolators datasheet	PDF \| HTML	16 Nov 2015
	Certificate	VDE Certificate for Basic Isolation for DIN EN IEC 60747-17 (Rev. Z)		29 May 2026
	Certificate	UL Certificate of Compliance File E181974 Vol 4 Sec 6 (Rev. S)		07 May 2026
	White paper	Improve Your System Performance by Replacing Optocouplers with Digital Isolators (Rev. D)	PDF \| HTML	07 Nov 2025
	Certificate	CQC Certificate for ISOxxD (Rev. B)		19 Aug 2025
	Certificate	CSA Certificate for ISO73xxD		22 Feb 2023
	White paper	Why are Digital Isolators Certified to Meet Electrical Equipment Standards?		16 Nov 2021
	White paper	Distance Through Insulation: How Digital Isolators Meet Certification Requiremen	PDF \| HTML	11 Jun 2021
	Application brief	How to Replace Optocouplers with Digital Isolators in Standard Interface Circuit (Rev. A)	PDF \| HTML	19 May 2021

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

DIGI-ISO-EVM — Universal digital isolator evaluation module

DIGI-ISO-EVM is an evaluation module (EVM) used to evaluate any of the TI single-channel, dual-channel, triple-channel, quad-channel or six-channel digital isolator devices in five different packages - 8-pin narrow-body SOIC (D), 8-pin wide-body SOIC (DWV), 16-pin wide-body SOIC (DW), 16-pin ultra- (...)

User guide: PDF | HTML

Not available on TI.com

Evaluation board

ISO7310C-EVM — Single-channel digital isolator evaluation module

The ISO7310C-EVM evaluation module (EVM) helps you evaluate device performance, supporting the fast development and analysis of isolated systems. This EVM board supports evaluation of any of our single-channel or dual-channel digital isolators in an 8-pin SOIC package.

The ISO7310C digital isolator (...)