CC115L
- KEY FEATURES
- Programmable Output Power up to +12 dBm for all Supported Frequencies
- Programmable Data Rate from 0.6 to 600 kbps
- Frequency Bands: 300 - 348 MHz, 387 - 464 MHz, and 779 - 928 MHz
- 2-FSK, 4-FSK, GFSK, MSK, and OOK Supported
- DIGITAL FEATURES
- Flexible Support for Packet Oriented Systems
- On-chip Support for Sync Word Insertion, Flexible Packet Length, and Automatic CRC Calculation
- LOW-POWER FEATURES
- 200 nA Sleep Mode Current Consumption
- Fast Startup Time; 240 μs From Sleep to TX Mode
- 64-byte TX FIFO
- Few External Components; Fully Integrated Frequency Synthesizer
- Green Package: RoHS Compliant and No Antimony or Bromine
- Small Size (QLP 4x4 mm Package, 20 pins)
- Suited for Systems Targeting Compliance with EN 300 220 (Europe) and FCC CFR Part 15 (US)
- Support for Asynchronous and Synchronous Serial Transmit Mode for Backwards Compatibility with Existing Radio Communication Protocols
The CC115L is a cost optimized sub-1 GHz RF transmitter. The circuit is based on the popular CC1101 RF transceiver, and RF performance characteristics are identical. The CC115L value line transmitter together with the CC113L value line receiver enables a low cost RF link.
The RF transmitter is integrated with a configurable baseband modulator. The modem supports various modulation formats and has a configurable data rates from 0.6 to 600 kbps.
CC115L provides extensive hardware support for packet handling, data buffering and burst transmissions.
The main operating parameters and the 64- byte transmit FIFO of CC115L can be controlled via an SPI interface. In a typical system, the CC115L will be used together with a microcontroller and a few additional passive components.
Technical documentation
Type | Title | Date | ||
---|---|---|---|---|
* | Data sheet | CC115L Value Line Transmitter datasheet (Rev. B) | PDF | HTML | 08 May 2014 |
* | Errata | CC115L Errata Notes | 26 May 2011 | |
Selection guide | Leitfaden zur Auswahl drahtloser Kommunikationstechnologie (Rev. B) | 07 Mar 2022 | ||
Selection guide | 無線連線技術選擇指南 (Rev. B) | 07 Mar 2022 | ||
Selection guide | 무선 연결 기술 선택 가이드 (Rev. B) | 07 Mar 2022 | ||
Selection guide | Wireless Connectivity Technology Selection Guide (Rev. B) | 14 Feb 2022 | ||
Application note | Debugging Communication Range (Rev. A) | PDF | HTML | 23 May 2019 | |
White paper | Migrating your proprietary solution to the SimpleLink™ WMCU | 07 Nov 2018 | ||
Application note | CC-Antenna-DK2 and Antenna Measurements Summary (Rev. A) | 02 Oct 2017 | ||
Application note | TI LPRF EASYMODE | 12 Dec 2014 | ||
Application note | DN038 -- Miniature Helical PCB Antenna for 868 MHz or 915/920 MHz | 27 Nov 2012 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
SMARTRFTRXEBK — SmartRF Transceiver Evaluation Board
The SmartRF Transceiver Evaluation Board (TrxEB) is intended to be used together with Texas Instruments’ low-power RF transceivers for evaluation, performance testing and software development.
The following transceiver evaluation modules are supported:
- CC1101EM*
- CC11xLEM*
- CC112xEM*
- CC1175EM*
- CC1200EM*
- (...)
SWRC219 — TrxEB RF PER Test Software
Supported products & hardware
Products
Sub-1 GHz transceivers
Hardware development
Development kit
SMARTRF-STUDIO-7 — SmartRF Studio 7 application software
SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)
Supported products & hardware
Products
MSP430 microcontrollers
Low-power 2.4-GHz products
Sub-1 GHz wireless MCUs
Sub-1 GHz transceivers
Other wireless products
Automotive wireless connectivity products
Hardware development
Development kit
Evaluation board
Interface adapter
Daughter card
SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS — Hardware design reviews for SimpleLink™ CC1xxx devices
- Step 1: Before requesting a review, it is important that to review the technical documentation and design & development resources available on the corresponding product page (see CC1xxx product page links below).
- Step 2: (...)
Package | Pins | CAD symbols, footprints & 3D models |
---|---|---|
VQFN (RGP) | 20 | Ultra Librarian |
Ordering & quality
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
- Fab location
- Assembly location
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.