The TUSB1064 s a VESA USB Type-C™ Alt Mode redriving switch supporting USB 3.1 data rates up to 10 Gbps and DisplayPort 1.4 up to 8.1 Gbps for upstream facing port (Sink). The device is used for UFP_D pin assignments C, D, and E from the VESA DisplayPort Alt Mode on USB Type-C Standard.
The TUSB1064 provides several levels of receive linear equalization to compensate for inter symbol interference (ISI) due to cable and board trace loss. Operates on a single 3.3-V supply and comes in a commercial temperature range and industrial temperature range.
| Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | TUSB1064 USB TYPE-C™ DP Alt Mode 10 Gbps Sink-Side Linear Redriver Crosspoint Switch datasheet (Rev. C) | PDF | HTML | 24 Sep 2019 |
| Technical article | 6 key questions when designing for USB protocol interfaces | PDF | HTML | 31 Jul 2020 | |
| White paper | USB3.x Linear Redriver Signal Conditioning Theory and Practical Tuning Method | 01 Aug 2018 | ||
| Application note | TUSB1064 Configuration Guide | 23 Jul 2018 | ||
| White paper | Strengthening the USB Type-C signal chain through redrivers | 21 Aug 2017 | ||
| White paper | Alternate Mode for USB Type-C™: Going Beyond USB | 26 Sep 2016 | ||
| White paper | Transition existing products from USB 2.0 OTG to USB Type-C | 10 Jul 2015 | ||
| White paper | Low-cost implementation of USB Type-C | 07 Jul 2015 |
For additional terms or required resources, click any title below to view the detail page where available.
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| WQFN (RNQ) | 40 | Ultra Librarian |
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.