Home Motor drivers Brushless DC (BLDC) motor drivers BLDC drivers
Home
Motor drivers
Brushless DC (BLDC) motor drivers
BLDC drivers

DRV8317

ACTIVE

24-V max 5-A peak three-phase motor driver with integrated FETs and current sensing

Order now
Data sheet

DRV8317

ACTIVE
Data sheet Order now

Product details

Rating Catalog Architecture Integrated FET Control interface 3xPWM, 6xPWM RDS(ON) (HS + LS) (mΩ) 130 Peak output current (A) 5 Vs (min) (V) 4.5 Vs ABS (max) (V) 24 Features Integrated FETs, Current sense Amplifier, Slew Rate Adjustment, LDO Regulator Operating temperature range (°C) -40 to 125
Rating Catalog Architecture Integrated FET Control interface 3xPWM, 6xPWM RDS(ON) (HS + LS) (mΩ) 130 Peak output current (A) 5 Vs (min) (V) 4.5 Vs ABS (max) (V) 24 Features Integrated FETs, Current sense Amplifier, Slew Rate Adjustment, LDO Regulator Operating temperature range (°C) -40 to 125
WQFN (REE) 36 20 mm² 4 x 5
  • Three-phase BLDC motor driver
    • Configurable slew rate for EMI mitigation
    • Programmable gain current sensing
    • Supports up to 200-kHz PWM frequency
    • Integrated shoot through protection
  • 4.5-V to 20-V operating voltage
    • 24-V absolute maximum voltage
  • High output current capability
    • 5-A peak current drive
  • Low on-state resistance MOSFETs
    • RDS(ON) (HS + LS) at TA = 25°C : 130-mΩ (typical)
  • Ultra-low Q-current sleep mode
    • 3-µA (max.) at VVM = 12-V, TA = 25°C
  • Multiple control interface options
    • 6x PWM control interface
    • 3x PWM control interface
  • Integrated current sensing
    • No external current sense resistor required
    • Three-phase current sense outputs
  • SPI and hardware device variants
    • 10-MHz SPI interface variant for flexibility
    • Pin configurable variant for simplicity
  • Supports 1.8-V, 3.3-V, and 5-V logic inputs
  • Built-in 3.3-V ± 4.5%, 80-mA LDO regulator
  • Integrated protection features
    • VM under voltage lockout (UVLO)
    • VM over voltage protection (OVP)
    • Charge pump under voltage (CPUV)
    • Over current protection (OCP)
    • Over temperature warning and shutdown (OTW/OTS)
    • Fault condition indication pin (nFAULT)
  • Three-phase BLDC motor driver
    • Configurable slew rate for EMI mitigation
    • Programmable gain current sensing
    • Supports up to 200-kHz PWM frequency
    • Integrated shoot through protection
  • 4.5-V to 20-V operating voltage
    • 24-V absolute maximum voltage
  • High output current capability
    • 5-A peak current drive
  • Low on-state resistance MOSFETs
    • RDS(ON) (HS + LS) at TA = 25°C : 130-mΩ (typical)
  • Ultra-low Q-current sleep mode
    • 3-µA (max.) at VVM = 12-V, TA = 25°C
  • Multiple control interface options
    • 6x PWM control interface
    • 3x PWM control interface
  • Integrated current sensing
    • No external current sense resistor required
    • Three-phase current sense outputs
  • SPI and hardware device variants
    • 10-MHz SPI interface variant for flexibility
    • Pin configurable variant for simplicity
  • Supports 1.8-V, 3.3-V, and 5-V logic inputs
  • Built-in 3.3-V ± 4.5%, 80-mA LDO regulator
  • Integrated protection features
    • VM under voltage lockout (UVLO)
    • VM over voltage protection (OVP)
    • Charge pump under voltage (CPUV)
    • Over current protection (OCP)
    • Over temperature warning and shutdown (OTW/OTS)
    • Fault condition indication pin (nFAULT)

DRV8317 provides three integrated MOSFET half-bridges for driving three-phase brushless DC (BLDC) motors with 5-V, 9-V, 12-V, or 18-V DC rails or 2s to 4s batteries. The device provides integrated three-phase current sensing which eliminates the need for external sense resistors. DRV8317 has an integrated LDO that provides a regulated 3.3-V rail capable of delivering up to 80mA for external loads like MCU, logic circuits, hall sensors etc.,

DRV8317 provides a configurable 6x or 3x PWM control scheme which can be used to implement sensored or sensorless field-oriented control (FOC), sinusoidal control, or trapezoidal control using an external microcontroller. DRV8317 is capable of driving a PWM frequency of up to 200 kHz. DRV8317 is highly configurable either through SPI (DRV8317S) or pins (DRV8317H) - PWM mode, slew rate, current sense gain are some of the configurable features.

A number of protection features including supply under voltage lockout (UVLO), over voltage protection (OVP), charge pump under voltage (CPUV), over current protection (OCP), over temperature warning (OTW) and over temperature shutdown (OTS) are integrated into DRV8317 to protect the device, motor, and system against fault events. Fault conditions are indicated by the nFAULT pin.

DRV8317 provides three integrated MOSFET half-bridges for driving three-phase brushless DC (BLDC) motors with 5-V, 9-V, 12-V, or 18-V DC rails or 2s to 4s batteries. The device provides integrated three-phase current sensing which eliminates the need for external sense resistors. DRV8317 has an integrated LDO that provides a regulated 3.3-V rail capable of delivering up to 80mA for external loads like MCU, logic circuits, hall sensors etc.,

DRV8317 provides a configurable 6x or 3x PWM control scheme which can be used to implement sensored or sensorless field-oriented control (FOC), sinusoidal control, or trapezoidal control using an external microcontroller. DRV8317 is capable of driving a PWM frequency of up to 200 kHz. DRV8317 is highly configurable either through SPI (DRV8317S) or pins (DRV8317H) - PWM mode, slew rate, current sense gain are some of the configurable features.

A number of protection features including supply under voltage lockout (UVLO), over voltage protection (OVP), charge pump under voltage (CPUV), over current protection (OCP), over temperature warning (OTW) and over temperature shutdown (OTS) are integrated into DRV8317 to protect the device, motor, and system against fault events. Fault conditions are indicated by the nFAULT pin.
filter Find other BLDC drivers
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 4
Top documentation Type Title Format options Date
* Data sheet DRV8317 Three-Phase PWM Motor Driver datasheet PDF | HTML 22 Feb 2022
Application note Improving Thermal Performance for Integrated FET Drivers PDF | HTML 23 Aug 2024
Product overview DRV8317 versus Competitor M (Rev. A) PDF | HTML 21 Aug 2023
Certificate DRV8317HEVM EU RoHS Declaration of Conformity (DoC) 04 Nov 2022

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

DRV8317HEVM — DRV8317 evaluation module for three-phase brushless DC (BLDC) gate driver

The DRV8317 is a 4.5-V to 20-V, 5-A peak integrated three-phase FET-driver IC for motor drive applications. It provides three integrated half-bridges capable of directly driving a three-phase brushless DC motor. The DRV8317 integrates multiple control interface options, low-side integrated current (...)
User guide: PDF | HTML
Not available on TI.com
Getting started

MSP-MOTOR-CONTROL — MSP firmware solutions for motor control

MSP Motor Control is a collection of software, tools and examples to spin motors in 30 minutes or less with MSPM0 Arm® Cortex® M0+ MCUs and popular motor driver solutions.

MSP Motor Control provides examples for supported hardware kits to spin brushed, stepper, and three-phase motors with sensored (...)

Supported products & hardware

Supported products & hardware
Get started Download options
Calculation tool

BLDC-MOSFET-THERMAL-CALC — BLDC integrated MOSFET driver thermal calculator tool

Calculates the thermals of a BLDC integrated MOSFET driver based on user input system parameters
Supported products & hardware

Supported products & hardware
Download
Design tool

SLVRBN8 — DRV8317 2-Layer Thermal Board Design Files

Supported products & hardware

Supported products & hardware
Download
Package Pins CAD symbols, footprints & 3D models
WQFN (REE) 36 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos