Home Switches & multiplexers Analog switches & muxes
Home
Switches & multiplexers
Analog switches & muxes
NEW

TMUX582F-SEP

ACTIVE

Radiation-tolerant, +60V protected, latch-up immune 8:1 multiplexer with adjustable fault thresholds

Order now
Data sheet

TMUX582F-SEP

ACTIVE
Data sheet Order now

Product details

Configuration 8:1 Number of channels 1 Power supply voltage - single (V) 8, 12, 16, 20 Protocols Analog Ron (typ) (Ω) 180 CON (typ) (pF) 30 ON-state leakage current (max) (µA) 0.022 Supply current (typ) (µA) 0.14 Bandwidth (MHz) 150 Operating temperature range (°C) -55 to 125 Features 1.8-V compatible control inputs, Break-before-make, Fail-safe logic, Overvoltage protection, Powered-off protection Input/output continuous current (max) (mA) 5 Rating Space Supply voltage (max) (V) 20
Configuration 8:1 Number of channels 1 Power supply voltage - single (V) 8, 12, 16, 20 Protocols Analog Ron (typ) (Ω) 180 CON (typ) (pF) 30 ON-state leakage current (max) (µA) 0.022 Supply current (typ) (µA) 0.14 Bandwidth (MHz) 150 Operating temperature range (°C) -55 to 125 Features 1.8-V compatible control inputs, Break-before-make, Fail-safe logic, Overvoltage protection, Powered-off protection Input/output continuous current (max) (mA) 5 Rating Space Supply voltage (max) (V) 20
TSSOP (PW) 20 41.6 mm² 6.5 x 6.4
  • VID V62/23607-01XE
  • Radiation hardened
    • Single event latch-up (SEL) immune to 43 MeV-cm2/mg at 125°C
    • ELDRS free to 30krad(Si)
    • Total ionizing dose (TID) RLAT for every wafer lot up to 30krad(Si)
    • TID characterized up to 30krad(Si)
    • Single event transient (SET) characterized to 43 MeV-cm2 /mg
  • Supply range: +8V to +22V
  • Integrated powered-off and overvoltage protection
    • Overvoltage and power-off-protected up to +60V
    • Cold sparing capable up to +60V
    • Adjustable fault threshold threshold (VFP) from 3V to supply
    • Interrupt flag feedback indicating faulted channel
    • Non-fault channels continue to operate with low leakage currents
  • Latch-up immune construction
  • Precision performance with ±4.5nA source off leakage current (max) and 4pF off-cap
  • Space enhanced plastic
    • Operating temperature from –55°C to +125°C
    • Controlled baseline
    • Gold wire and NiPdAu lead finish
    • One assembly and test site
    • One fabrication site
    • Extended product life cycle
    • Product traceability
    • Enhanced mold compound for low outgassing
  • Small, industry standard TSSOP-20 packaging
  • VID V62/23607-01XE
  • Radiation hardened
    • Single event latch-up (SEL) immune to 43 MeV-cm2/mg at 125°C
    • ELDRS free to 30krad(Si)
    • Total ionizing dose (TID) RLAT for every wafer lot up to 30krad(Si)
    • TID characterized up to 30krad(Si)
    • Single event transient (SET) characterized to 43 MeV-cm2 /mg
  • Supply range: +8V to +22V
  • Integrated powered-off and overvoltage protection
    • Overvoltage and power-off-protected up to +60V
    • Cold sparing capable up to +60V
    • Adjustable fault threshold threshold (VFP) from 3V to supply
    • Interrupt flag feedback indicating faulted channel
    • Non-fault channels continue to operate with low leakage currents
  • Latch-up immune construction
  • Precision performance with ±4.5nA source off leakage current (max) and 4pF off-cap
  • Space enhanced plastic
    • Operating temperature from –55°C to +125°C
    • Controlled baseline
    • Gold wire and NiPdAu lead finish
    • One assembly and test site
    • One fabrication site
    • Extended product life cycle
    • Product traceability
    • Enhanced mold compound for low outgassing
  • Small, industry standard TSSOP-20 packaging

The TMUX582F-SEP is a modern 8:1 multiplexer suitable for single ended operation. This latch-up immune device offers robust overvoltage protection up to +60V making it optimal for harsh space environments. Additionally, this protection operates in powered-on, powered-off, and floating supply conditions.

During a fault such as an overvoltage or undervoltage event, the offending channel turns OFF and the Sx pin becomes high impedance. If this fault channel is selected, the drain (D) is pulled to the fault rail that is exceeded (Vfp or Vfn). All other Sx pins which are not under fault continue to operate normally. During normal operation, when the source (Sx) does not exceed Vfp or Vfn, the switch operates with low leakage, low capacitance and an ultra-flat on-resistance. This provides high performance signal integrity with minimal distortion.

The TMUX582F-SEP is a fault protected CMOS multiplexer flexible enough to handle almost any application, from system monitoring, to power-up sequencing protection, to high precision front end data acquisition.

The TMUX582F-SEP is a modern 8:1 multiplexer suitable for single ended operation. This latch-up immune device offers robust overvoltage protection up to +60V making it optimal for harsh space environments. Additionally, this protection operates in powered-on, powered-off, and floating supply conditions.

During a fault such as an overvoltage or undervoltage event, the offending channel turns OFF and the Sx pin becomes high impedance. If this fault channel is selected, the drain (D) is pulled to the fault rail that is exceeded (Vfp or Vfn). All other Sx pins which are not under fault continue to operate normally. During normal operation, when the source (Sx) does not exceed Vfp or Vfn, the switch operates with low leakage, low capacitance and an ultra-flat on-resistance. This provides high performance signal integrity with minimal distortion.

The TMUX582F-SEP is a fault protected CMOS multiplexer flexible enough to handle almost any application, from system monitoring, to power-up sequencing protection, to high precision front end data acquisition.

filter Find other Analog switches & muxes
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* Data sheet TMUX582F-SEP Radiation-Tolerant +60V Protected, Latch-Up Immune 8:1 Multiplexer with Adjustable Fault Threshol datasheet (Rev. A) 18 Sep 2024
* Radiation & reliability report TMUX582F-SEP Single-Event Effects (SEE) Radiation Report (Rev. A) PDF | HTML 07 Aug 2024
* Radiation & reliability report TMUX582F-SEP Production Flow and Reliability Report 02 Jan 2024

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TMUX-24PW-EVM — TMUX generic evaluation module for 16-, 20- and 24-pin PW thin shrink small-outline packages (TSSOP)

The TMUX-24PW-EVM evaluation module allows for the quick prototyping and DC characterization of the TI line of TMUX products that use 16-, 20- or 24-pin TSSOP packages (PW) and is rated for high-voltage operation.

User guide: PDF | HTML
Not available on TI.com
Package Pins CAD symbols, footprints & 3D models
TSSOP (PW) 20 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos