LDC2114EVM

LDC2114 1.8V 4-Channel Inductive Touch Evaluation Module

LDC2114EVM

Order now

Overview

The LDC2114EVM (Evaluation Module) demonstrates the use of inductive sensing to detect a button press on a monolithic piece of metal. The EVM can connect up to 4 buttons using the LDCTOUCHCOMCOILEVM or customized coils designed through Webench. Button presses & levels of pressure are indicated by onboard LEDs to indicated through onboard LEDs. The device can also be configured at different duty cycles to reduce power consumption.

Features

<7µA at 0.625 samples per second
Up to 4 buttons supported
Dedicated button logic outputs
Integrated and configurable algorithms for button press detection

USB A - micro USB cable
Sensor interconnect cable WM11299-ND

Inductive sensor AFEs

LDC2112 — 2-Ch inductance to digital converter with baseline tracking for low power touch buttons

LDC2114 — 4-Ch inductance to digital converter with baseline tracking for low power touch buttons

Linear & low-dropout (LDO) regulators

LP5951 — 150-mA, low-IQ, low-dropout voltage regulator with enable

Download View video with transcript Video

Order & start development

Explore packages of hardware, software and documentation

Evaluate with LDC2114

close

Start evaluating with the hardware, software, and key documentation that you will need to evaluate the LDC2114.

Evaluation board

LDC2114EVM — LDC2114 1.8V 4-Channel Inductive Touch Evaluation Module

Required

Why do I need this?

This evaluation module allows you to quickly evaluate the functionality and analog performance for the LDC2114EVM device.

Not available on TI.com

Evaluation board

LDCTOUCHCOMCOILEVM — Inductive Touch Sensor Coil Evaluation Board

Required if

Needing an external LC tank.

Why do I need this?

This evaluation module provides some common LC coil design that helps in quick evaluation of the design.

Not available on TI.com

GUI for evaluation module (EVM)

SNOC028 — Sensing Solutions EVM GUI Tool v1.10.0

Required if

You want to use LDC2114EVM.

Why do I need this?

This GUI is the accompanying software to the LDC2114EVM that can assist in configuration and also is capable of measuring the dataoutput from the LDC2114 device.

Supported products & hardware

Download

SNOC028 — Sensing Solutions EVM GUI Tool v1.10.0

close

Latest version

Version: 01.00.00.0F

Release date: 24 Feb 2019

open-in-new

View all versions

lock

Sensing Solutions EVM GUI Tool v1.10.0 (zip) — 61513 K

Checksum

lock

= Requires export approval (1 minute)

Products

Humidity sensors

HDC1000 — Low Power, 3% Accuracy Digital Humidity Sensor with Integrated Temperature Sensor

HDC1050 — ±3% low-power, digital humidity sensor with temperature sensor

HDC2010 — 2% RH ultra-small, low-power digital relative humidity sensor

HDC2080 — 2% RH ultra-low-power digital relative humidity sensor, interrupt/DRDY

Inductive sensor AFEs

LDC1001-Q1 — Automotive, 5V, grade-0, Inductance to Digital Converter

LDC1041 — 1-Ch, 5V, 24-bit L, 8-bit Rp, inductance to digital converter

LDC1051 — 1-Ch, 5V, 8-bit Rp, inductance to digital converter

LDC1101 — 1-Ch, 1.8V, 24-bit L, 16-bit Rp, inductance to digital converter for high speed applications

LDC1312 — 2-Ch, 12-bit, general purpose inductance to digital converter

LDC1312-Q1 — 2-Ch, 12-bit, general purpose automotive inductance to digital converter

LDC1314 — 4-Ch, 12-bit, general purpose inductance to digital converter

LDC1314-Q1 — 4-Ch, 12-bit, general purpose automotive inductance to digital converter

LDC1612 — 2-Ch, 28-bit, high-resolution Inductance to digital converter

LDC1612-Q1 — 2-Ch, 28-bit, high-resolution automotive inductance to digital converter

LDC1614 — 4-Ch, 28-bit, high-resolution Inductance to digital converter

LDC1614-Q1 — 4-Ch, 28-bit, high-resolution automotive inductance to digital converter

LDC2112 — 2-Ch inductance to digital converter with baseline tracking for low power touch buttons

LDC2114 — 4-Ch inductance to digital converter with baseline tracking for low power touch buttons

Signal conditioners

FDC1004 — 4-channel 16-bit capacitance-to-digital converter with active shield driver for EMC protection

FDC1004-Q1 — Automotive, 4-channel 16-bit capacitance-to-digital converter with active shield driver for EMC

FDC2112 — 2-Ch, 12-bit, capacitance to digital converter

FDC2112-Q1 — 2-Ch, 12-bit, automotive capacitance to digital converter

FDC2114 — 4-Ch, 12-bit, capacitance to digital converter

FDC2114-Q1 — 4-Ch, 12-bit, automotive capacitance to digital converter

FDC2212 — 2-Ch, 28-bit, capacitance to digital converter

FDC2212-Q1 — 2-Ch, 28-bit, automotive capacitance to digital converter

FDC2214 — 4-Ch, 28-bit, capacitance to digital converter

FDC2214-Q1 — 4-Ch, 28-bit, automotive capacitance to digital converter

Hardware development

Evaluation board

FDC1004EVM — FDC1004EVM - 4 Channel Capacitive to Digital Converter Evaluation Module

FDC1004QEVM — Automotive 4-Channel Capacitive to Digital Converter Evaluation Module

FDC2114EVM — FDC2114 with Two Capacitive Sensors Evaluation Module

FDC2214EVM — FDC2214 with Two Capacitive Sensors Evaluation Module

HDC1010EVM — HDC1010 Low Power Humidity and Temperature Sensor Evaluation Module

HDC1080EVM — HDC1080 low-power humidity and temperature sensor evaluation module

HDC2010EVM — HDC2010 Low Power Humidity and Temperature Sensor Evaluation Module

HDC2080EVM — HDC2080 Low Power Humidity and Temperature Sensor Evaluation Module

LDC1000EVM — LDC1000EVM - Evaluation Module for Inductance to Digital Converter with Sample PCB Coil

LDC1312EVM — LDC1312 Evaluation Module for Inductance to Digital Converter with Sample PCB Coils

LDC1314EVM — LDC1314 Evaluation Module for Inductance to Digital Converter with Sample PCB Coils

LDC1612EVM — LDC1612 Evaluation Module for Inductance to Digital Converter with Sample PCB Coils

LDC1614EVM — LDC1614 Evaluation Module for Inductance to Digital Converter with Sample PCB Coils

LDC2114EVM — LDC2114 1.8V 4-Channel Inductive Touch Evaluation Module

Release Infomation

The design resource accessed as www.ti.com/lit/zip/snoc028 or www.ti.com/lit/xx/snoc028f/snoc028f.zip has been migrated to a new user experience at www.ti.com/tool/download/SNOC028. Please update any bookmarks accordingly.

Documentation & related resources

User guide

LDC2114 Evaluation Module for Inductive Touch Inductance to Digital Converter

HARDWARE AND SOFTWARE PACKAGE

Evaluate with LDC2114

View package

Order this hardware only

Evaluation board

LDC2114EVM — LDC2114 1.8V 4-Channel Inductive Touch Evaluation Module

Not available on TI.com

TI's Standard Terms and Conditions for Evaluation Items apply.

Technical documentation

star

= Top documentation selected by TI

No results found. Please clear your search and try again.

View all 2

	Type	Title		Date
*	User guide	LDC2114 Evaluation Module for Inductive Touch Inductance to Digital Converter		14 Dec 2016
	Certificate	LDC2114EVM EU Declaration of Conformity (DoC)		02 Jan 2019

LDC2114EVM

LDC2114 1.8V 4-Channel Inductive Touch Evaluation Module

LDC2114EVM

Overview

Features

Inductive sensor AFEs

Linear & low-dropout (LDO) regulators

Order & start development

Explore packages of hardware, software and documentation

Evaluate with LDC2114

LDC2114EVM — LDC2114 1.8V 4-Channel Inductive Touch Evaluation Module

LDCTOUCHCOMCOILEVM — Inductive Touch Sensor Coil Evaluation Board

SNOC028 — Sensing Solutions EVM GUI Tool v1.10.0

SNOC028 — Sensing Solutions EVM GUI Tool v1.10.0

Products

Humidity sensors

Inductive sensor AFEs

Signal conditioners

Hardware development

Evaluation board

Release Infomation

Documentation & related resources

Evaluate with LDC2114

Order this hardware only

LDC2114EVM — LDC2114 1.8V 4-Channel Inductive Touch Evaluation Module

Technical documentation

Support & training

TI E2E™ forums with technical support from TI engineers

Video series

Videos

Download options

SNOC028 — Sensing Solutions EVM GUI Tool v1.10.0

Products

Humidity sensors

Inductive sensor AFEs

Signal conditioners

Hardware development

Evaluation board

Release Infomation

Supported products & hardware

Products

Humidity sensors

Inductive sensor AFEs

Signal conditioners

Hardware development

Evaluation board