WL18XXCOM82SDMMC

Order now

Overview

The WiLink SDIO board is a SDMMC adapter board and is an easy to use connector between a WiLink COM8 Evaluation module [WL1837MODCOM8i and WL1835MODCOM8B] and a generic SD/MMC card slot on a host processor EVM. The adapter card enables the WiLink Wi-Fi module to operate over SDIO. It also provides UART connection for Bluetooth® over a FPC connector or wire cables.

In addition the adapter is a standalone evaluation platform using TI wireless PC debug tools for any WiLink module/chip solution with a PCB 100-pin edge connector.

This board is designed for use with various platforms such as the TI Sitara AM335 and AM437.

Features

Easy to connect WiLink8 modules to platforms over SDMMC
3v level-shifter to 1.8v IO
BT and WiFi debug pins

Wi-Fi products

WL1801MOD — WiLink™ 8 single band Wi-Fi® module

WL1805MOD — WiLink™ 8 single band, 2x2 MIMO Wi-Fi® module

WL1807MOD — WiLink™ 8 industrial dual band combo, 2x2 MIMO Wi-Fi module

WL1831MOD — WiLink™ 8 industrial Wi-Fi, Bluetooth & Bluetooth Smart (Low energy) module

WL1835MOD — WiLink™ 8 single band combo 2x2 MIMO Wi-Fi®, Bluetooth® & Bluetooth Smart module

WL1837MOD — WiLink™ 8 industrial dual band, 2x2 MIMO Wi-Fi®, Bluetooth® & Bluetooth Smart module

Download View video with transcript Video

Order & start development

Explore packages of hardware, software and documentation

Get started and develop with Wilink 8 Wifi and Bluetooth solutions

Start Wi-FI and Bluetooth development on Linux based processors with our example code, software, hardware, tools, and documentation.

Daughter card

WL1835MODCOM8B — WiLink™ 8 Module 2.4 GHz WiFi + Bluetooth COM8 Kit for Sitara

Required

None.

Why do I need this?

This EVM allows you to get started and develop on our latest Wilink 8 Wi-FI and dual-mode Bluetooth 5.1 certified device.

Not available on TI.com

Evaluation board

TMDXEVM3358 — AM335x evaluation module

Required if

Developing with a Sitara Arm®-based Linux processor.

Why do I need this?

This tool, a Linux based host processor EVM with integrated COM8 connector, allows you to start development and directly plug-in to the Wilink 8 COM8 EVM.

Not available on TI.com

Evaluation board

TMDSEVM437X — AM437x high security evaluation module

Required if

Developing with a Sitara Arm®-based Linux processor.

Why do I need this?

This tool, a Linux based host processor EVM with integrated COM8 connector, allows you to start development and directly plug-in to the Wilink 8 COM8 EVM.

Not available on TI.com

Evaluation board

TMDSEVM572X — AM572x evaluation module

Required if

Developing with a Sitara Arm®-based Linux processor.

Why do I need this?

This tool, a Linux based host processor EVM with integrated COM8 connector, allows you to start development and directly plug-in to the Wilink 8 COM8 EVM.

Not available on TI.com

Evaluation board

WL18XXCOM82SDMMC — WL18XXCOM82SDMMC

Required if

Developing for Wi-Fi protocols on any host processor EVM without COM8 connector.

Why do I need this?

This adapter card allows the COM8 EVM to work with a host processor EVM that doesn't have a COM8 connector, but does have a SDMMC slot. For example the Sitara AM65x EVM.

Not available on TI.com

Driver or library

TI-BT-4-2-STACK-LINUX-ADDON — TI Bluetooth 4.2 Stack Add-On for Linux Platforms With WL183x and CC2564C

lock

= Requires export approval (1 minute)

Required

None.

Why do I need this?

This software provides you support for Bluetopia Bluetooth stack on a Linnux processor.

lock

Download

Driver or library

WL18XX-BT-SP — Bluetooth service pack for WL18xx

lock

= Requires export approval (1 minute)

Required

None.

Why do I need this?

The service pack is loaded during initialization time and, and you will need it for Bluetooth operations, regardless of the stack selection.

lock

Download

Application software & framework

WILINK-BT_WIFI-WIRELESS_TOOLS — WiLink™ Wireless Tools for WL18XX modules

lock

= Requires export approval (1 minute)

Required if

Testing and debugging tools.

Why do I need this?

This software supports firmware logging for Wi-Fi and Bluetooth, as well as helps you with RF testing and tuning tools.

lock

Download

Application software & framework

WILINK-WIFI_MESH_VISUALIZATION_TOOL — WiLink™ Mesh Visualization Tool for WL18XX modules

lock

= Requires export approval (1 minute)

Required if

Developing and testing mesh network configurations.

Why do I need this?

This software, a Windows based visualization tool, helps you use Wilink 8 Wi-Fi devices.

lock

Download

Driver or library

WILINK8-WIFI-NLCP — WiLink8 NLCP Wi-Fi driver package for Linux OS

Required

None.

Why do I need this?

This tool allows you start development on a Linux based processor.

Supported products & hardware

Download options

WILINK8-WIFI-NLCP — WiLink8 NLCP Wi-Fi driver package for Linux OS

Latest version

Version: R8.8

Release date: 08 Oct 2020

download

WiLink™ 8 Solutions Overview — 711 K

Link to WiLink™ 8 Solutions Overview

download

Getting Started User's Guide — 711 K

Link to the Getting Started User's Guide

download

Wilink8 Calibrator Tool User's Guide — 711 K

Link to the Wilink8 Calibrator Tool User's Guide

Products

Wi-Fi products

WL1801 — WiLink™8 single-band industrial Wi-Fi® transceiver

WL1801MOD — WiLink™ 8 single band Wi-Fi® module

WL1805MOD — WiLink™ 8 single band, 2x2 MIMO Wi-Fi® module

WL1807MOD — WiLink™ 8 industrial dual band combo, 2x2 MIMO Wi-Fi module

WL1831 — WiLink™8 single-band industrial Wi-Fi®, Bluetooth® and Bluetooth Low Energy transceiver

WL1831MOD — WiLink™ 8 industrial Wi-Fi, Bluetooth & Bluetooth Smart (Low energy) module

WL1835MOD — WiLink™ 8 single band combo 2x2 MIMO Wi-Fi®, Bluetooth® & Bluetooth Smart module

WL1837MOD — WiLink™ 8 industrial dual band, 2x2 MIMO Wi-Fi®, Bluetooth® & Bluetooth Smart module

Documentation

open-in-new

R8.8 Release Notes

Link to R8.8 Release Notes

open-in-new

Software Manifest

Software Manifest of components inside the release

Release Infomation

This page contains specific information about WL18xx WLAN IP R8.8 software release package. The information in this page and reference is targeted to cover the feature content, build instructions, and prebuilt images for quick start.

Documentation & related resources

User guide

WiLink8 R8.8 Linux Wi-Fi Driver Release Build User's Guide PDF | HTML

WiLink8 Getting Started Guide PDF | HTML

HARDWARE AND SOFTWARE PACKAGE

Get started and develop with Wilink 8 Wifi and Bluetooth solutions

View package

Get started and develop with dual-mode Bluetooth solutions with Linux

Start Bluetooth development on Linux based processors with our example code, software, hardware, tools, and documentation.

Evaluation board

CC256XCQFN-EM — CC2564C Dual-Mode Bluetooth® Controller Evaluation Module

Required

None.

Why do I need this?

This EVM allows you to get started and develop on our latest dual-mode BT5.1 certified devices.

Not available on TI.com

Evaluation board

TMDXEVM3358 — AM335x evaluation module

Required if

Developing with a Sitara Arm®-based Linux processor.

Why do I need this?

This tool, a Linux based host processor EVM with integrated COM8 connector, allows you to start development and directly plug-in to the dual-mode BT COM8 EVM.

Not available on TI.com

Evaluation board

TMDSEVM437X — AM437x high security evaluation module

Required if

Developing with a Sitara Arm®-based Linux processor.

Why do I need this?

This tool, a Linux based host processor EVM with integrated COM8 connector, allows you to start development and directly plug-in to the Dual-mode BT COM8 EVM.

Not available on TI.com

Evaluation board

TMDSEVM572X — AM572x evaluation module

Required if

Developing with a Sitara Arm®-based Linux processor.

Why do I need this?

This tool, a Linux based host processor EVM with integrated COM8 connector, allows you to start development and directly plug-in to the dual-mode BT COM8 EVM.

Not available on TI.com

Evaluation board

WL18XXCOM82SDMMC — WL18XXCOM82SDMMC

Required if

Developing for Wi-Fi protocols on any host processor EVM without COM8 connector.

Why do I need this?

This adapter card allows the COM8 EVM to work with a host processor EVM that doesn't have a COM8 connector, but does have a SDMMC slot. For example the Sitara AM65x EVM.

Not available on TI.com

Driver or library

TI-BT-4-2-STACK-LINUX-ADDON — TI Bluetooth 4.2 Stack Add-On for Linux Platforms With WL183x and CC2564C

lock

= Requires export approval (1 minute)

Required

None.

Why do I need this?

This software provides you support for Bluetopia Bluetooth stack on a Linnux processor.

lock

Download

Driver or library

CC256XC-BT-SP — Bluetooth® Service Pack for CC256xC

lock

= Requires export approval (1 minute)

Required

None.

Why do I need this?

The service pack is loaded during initialization time and, and you will need it for Bluetooth operations, regardless of the stack selection.

lock

Download

Documentation & related resources

More literature

Dual-Mode Bluetooth® CC256xCQFNEM Evaluation Board PDF | HTML

HARDWARE AND SOFTWARE PACKAGE

Get started and develop with dual-mode Bluetooth solutions with Linux

View package

Order this hardware only

Evaluation board

WL18XXCOM82SDMMC — WL18XXCOM82SDMMC

Not available on TI.com

TI's Standard Terms and Conditions for Evaluation Items apply.

Design files

download

WiLink WL18xx SDIO Board Schematic

SWRR140.ZIP (433 KB)

download

WiLink WL18xx SDIO Board Assembly Drawings

SWRR142.PDF (538 KB)

download

WiLink WL18xx SDIO Board Bill of Materials (BOM)

SWRR139.ZIP (15 KB)

download

WiLink WL18xx SDIO Board Gerber Files

SWRC307.ZIP (337 KB)

download

WiLink WL18xx SDIO Board PCB .asc Layout

TIDRGH6.ZIP (307 KB)

download

WiLink WL18xx SDIO Board PCB Layout

SWRR141.ZIP (426 KB)

Technical documentation

star

= Top documentation selected by TI

No results found. Please clear your search and try again.

View all 2

	Type	Title		Date
*	User guide	WL18xxCOM82SDMMC WL18XX SDMMC and UART Adapter Board User's Guide		12 Jan 2015
	Certificate	WL18XXCOM82SDMMC EC Declaration of Conformity (DoC) (Rev. A)		02 Jan 2019

Related design resources

Software development

DRIVER OR LIBRARY

TI-BT-STACK-LINUX-ADDON — TI Bluetooth Linux Add-On for AM335x EVM, AM437x EVM and BeagleBone With WL18xx and CC256x

WILINK8-WIFI-MCP8 — WiLink™ 8 Proprietary Wi-Fi Driver – QNX, WinCE, Nucleus RTOS baseline

WILINK8-WIFI-NLCP — WiLink™ 8 Wi-Fi Driver for Linux OS

WL18XX-BT-SP — Bluetooth service pack for WL18xx

Reference designs

REFERENCE DESIGN

TIDC-WL1835MODCOM8B — 2.4 GHz WiFi® + Bluetooth® Certified Antenna Design on WiLink™ 1835 Module

TIDC-WL1837MODCOM8I — 2.4 & 5 GHz Dual Band Wi-Fi® + Bluetooth® Antenna Design on WiLink™ 1837 Module

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support.

Video series

View all videos

WL18XXCOM82SDMMC