3D DMD mechanical geometry
DLP-FLP-2507867-3D-DMD — DLP7000/UV DMD with FLP package (7Type-A) 3D-CAD geometry
This file is a 3D-CAD model of the DMD geometry for use when designing the DMD mounting
Data sheet
DLP7000UV
- 0.7-inch diagonal micromirror array
- 1024 × 768 array of aluminum, micrometer-sized mirrors
- 13.68-µm micromirror pitch
- ±12° micromirror tilt angle (Relative to Flat State)
- Designed for corner illumination
- Designed for use with UV light (363 to 420 nm):
- Window transmission 98% (single pass, through two window surfaces)
- Micromirror reflectivity 88%
- Array diffraction efficiency 85%
- Array fill factor 92% (nominal)
- Two 16-bit, low-voltage Differential Signaling (LVDS) double data rate (DDR) input data buses
- Up to 400-MHz input data clock rate
- 40.64-mm by 31.75-mm by 6.0-mm package footprint
- Hermetic package
DLP7000UV is a digitally controlled MEMS (micro-electromechanical system) spatial light modulator (SLM). When coupled to an appropriate optical system, the DLP7000UV can be used to modulate the amplitude, direction, and/or phase of incoming light.
The DLP7000UV digital micromirror device (DMD) is an addition to the DLP Discovery™ 4100 platform, which enables very fast pattern rates combined with high performance spatial light modulation operating beyond the visible spectrum into the UVA spectrum (363 nm to 420 nm). The DLP7000UV DMD is designed with a special window that is optimized for UV transmission. The DLP Discovery 4100 platform also provides the highest level of individual micromirror control with the option for random row addressing. Combined with a hermetic package, the unique capability and value offered by DLP7000UV makes it well suited to support a wide variety of industrial, medical, and advanced display applications.
The DLP7000UV DMD with a hermetic package is sold with a dedicated DLPC410 controller for high speed pattern rates of >32000 Hz (1-bit binary) and >1900 Hz (8-bit gray), one DLPR410 (DLP Discovery 4100 Configuration PROM), and one DLPA200 (DMD micromirror driver).
Similar products you might be interested in
Similar functionality to the compared device
Technical documentation
No results found. Please clear your search and try again.
View all 14 Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Evaluation board
DLPLCR70UVEVM — DLP7000UV DMD evaluation board
This DLP evaluation module (EVM) houses DLP7000UV, a 0.7 UV XGA 2xLVDS Type A DMD intended for applications using 363 – 420 nm ultraviolet (UV) illumination sources.
Evaluation board
DLPLCRC410EVM — DLPLCRC410 Evaluation Module
The DLPLCRC410EVM, paired with one of five other DMD-based EVMs, is an evaluation platform exhibiting advanced light control for applications like lithography, 3D Printing (SLS and SLA), Machine Vision, and Marking and Coding. This EVM enables evaluations of new customer illumination sources, (...)
Evaluation board
DLI-3P-DLI41XX — DLi D4100, D4120, D4130 Development Kits for DLP Discovery chipsets
DLi kits for DLP® Discovery™ chipsets (DLPC410 with DLP7000, DLP7000UV, DLP9500 or DLP9500UV DMDs) support custom interface development for industrial and medical systems and instrumentation. Choose among kit options based on desired hardware and software support. DLi4120 kits include (...)
Evaluation board
WDST-3P-W4100 — Wintech W4100 High Speed Development Kit
The Wintech W4100 development kit provides users with an alternative to Texas Instruments DLP® Discovery™ 4100 development platform. It utilizes the same FPGA platform and same data interfaces for frame rates up to 32,552 Hz and grayscale operation. The W4100 is compatible with the (...)
Development kit
VIALUX-3P-V-MODULES-410 — ViALUX V-Modules for DLPC410
ViALUX V-Modules are complete subsystems that include a controller board for DLPC410, a digital micromirror device (DLP650LNIR, DLP7000, DLP7000UV, DLP9500, DLP9500UV) and the proven ALP Controller Suite software. The industrial-grade modules support high-performance pixel-level control that is (...)
From: ViALUX
Optical module
VIALUX-3P-DLP7000UV-I — ViALUX GmbH optical modules for industrial using DLP7000UV
ViALUX GmbH is an independent third-party company with expertise in designing and manufacturing optical modules – a compact assembly that includes a digital micromirror device, illumination source, optics and associated mechanics – for industrial applications using the DLP7000UV. The optical (...)
From: ViALUX
Application software & framework
VIALUX-3P-ALP-4 — ViALUX ALP-4.1 Controller Software Suite for DLPLCRC410 Evaluation Module
ViALUX’ ALP-4.1 is an accessory software package compatible with the DLPLCRC410 evaluation module from Texas Instruments. It supports the built-in hardware components and contains the corresponding driver and controller firmware as well as ViALUX’ FPGA logic design for the EVM board. (...)
From: ViALUX
CAD/CAE symbol
DLP6500FLQ DLP7000 Type A Mounting Concept with Compression Springs (Rev. A)
DLPR011A.ZIP (399 KB)
CAD/CAE symbol
DLP6500FLQ DLP7000 Type A Mounting Concept with Tight Part Tolerances (Rev. A)
DLPR012A.ZIP (428 KB)
CAD/CAE symbol
DLP6500FLQ DLP7000 Type A Mounting Concept with Least Number of Parts (Rev. A)
DLPR013A.ZIP (395 KB)
Calculation tool
DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency
This calculator will be used to help customers understand how to model DMD diffraction patterns and efficiency with their specific DMD input parameters and is modeled to the customer’s specific design. Optical modules can also be used with the calculator.
Supported products & hardware
DMD mounting design
DLP-7TYPEA-203I-MOUNTING — TypeA 7Size DMD (203i) mounting and electrical interconnect information
This file includes drawings and 3D-CAD models for Type-A 7 ceramic size DMD mounting concept(s). Information is also included for the socket/interposer used to connect the DMD to a PCB.
Supported products & hardware
Design tool
DLI-3P-ACCESSORIES — DLi Accessories and Assemblies for DLP® Products
Digital Light Innovations (DLi) offers accessories, boards, and assemblies for development and production with DLP® Products. Examples include DMD controller boards, DMD board assemblies, flex cables, DMD mounting hardware assemblies, LED driver boards, and LED & fiber illumination assemblies.
- (...)
Design tool
DLP-OMM-SEARCH — DLP® Products third-party search tools
To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)
Design tool
DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES
The DLP optical design guidelines presentation provides a comprehensive overview of the guidelines specific to designing an optical system with DLP Products and will help enable customers in their design process.
Supported products & hardware
Simulation tool
DLPR410-IBIS — DLPR410 IBIS Model
IBIS file for the DLPR410 PROM device which supports the DLPC410, DLP650LNIR, DLP7000, DLP7000UV, DLP9500 and DLP9500UV.
From: Xilinx
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| DLP-TYPEA.7 (FLP) | 203 | Ultra Librarian |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.