Home Sensors Temperature sensors Digital temperature sensors
Home
Sensors
Temperature sensors
Digital temperature sensors

LM95214

ACTIVE

±2°C Quad Remote and Local Temperature Sensor with SMBus Interface

Order now
Data sheet

LM95214

ACTIVE
Data sheet Order now

Product details

Local sensor accuracy (max) 2 Type Remote Operating temperature range (°C) -40 to 140 Supply voltage (min) (V) 3 Interface type I2C, SMBus Supply voltage (max) (V) 3.6 Features ALERT, One-shot conversion Supply current (max) (µA) 800 Temp resolution (max) (bps) 11 Remote channels (#) 4 Addresses 3 Rating Catalog
Local sensor accuracy (max) 2 Type Remote Operating temperature range (°C) -40 to 140 Supply voltage (min) (V) 3 Interface type I2C, SMBus Supply voltage (max) (V) 3.6 Features ALERT, One-shot conversion Supply current (max) (µA) 800 Temp resolution (max) (bps) 11 Remote channels (#) 4 Addresses 3 Rating Catalog
WSON (NHL) 14 16 mm² 4 x 4
  • Accurately Senses Die Temperature of 4 Remote ICs or Diode Junctions and Local Temperature
  • Local Temperature Accuracy ±2.0°C (Maximum)
  • Remote Diode Temperature Accuracy ±1.1°C (Maximum)
  • Supply Voltage: 3 V to 3.6 V
  • Average Supply Current (1-Hz Conversion Rate) 0.57 mA (Typical)
  • Programmable Digital Filters and Analog Front-End Filter
  • 0.125°C LSB Temperature Resolution
  • 0.03125°C LSB Remote Temperature Resolution With Digital Filter Enabled
  • Signed Format: +127.875°C/–128°C Remote Range
  • Unsigned Format: 0°C/255°C Remote Range
  • Remote Diode Fault Detection, Model Selection, and Offset Correction
  • Mask and Status Register Support
  • 3 Programmable TCRIT Outputs With Programmable Shared Hysteresis and Fault-Queue
  • Programmable Conversion Rate and Shutdown Mode One-Shot Conversion Control
  • SMBus 2.0 Compatible Interface, Supports TIMEOUT
  • Three-Level Address Pin
  • Accurately Senses Die Temperature of 4 Remote ICs or Diode Junctions and Local Temperature
  • Local Temperature Accuracy ±2.0°C (Maximum)
  • Remote Diode Temperature Accuracy ±1.1°C (Maximum)
  • Supply Voltage: 3 V to 3.6 V
  • Average Supply Current (1-Hz Conversion Rate) 0.57 mA (Typical)
  • Programmable Digital Filters and Analog Front-End Filter
  • 0.125°C LSB Temperature Resolution
  • 0.03125°C LSB Remote Temperature Resolution With Digital Filter Enabled
  • Signed Format: +127.875°C/–128°C Remote Range
  • Unsigned Format: 0°C/255°C Remote Range
  • Remote Diode Fault Detection, Model Selection, and Offset Correction
  • Mask and Status Register Support
  • 3 Programmable TCRIT Outputs With Programmable Shared Hysteresis and Fault-Queue
  • Programmable Conversion Rate and Shutdown Mode One-Shot Conversion Control
  • SMBus 2.0 Compatible Interface, Supports TIMEOUT
  • Three-Level Address Pin

The LM95214 device is an 11-bit digital temperature sensor with a 2-wire System Management Bus (SMBus) interface that can very accurately monitor the temperature of four remote diodes as well as its own temperature. The four remote diodes can be external devices such as microprocessors, graphics processors that target the ideality of a 2N3904 transistor or diode-connected 2N3904s.

The LM95214 reports temperature in two different formats for +127.875°C/–128°C range and 0°C/255°C range. The LM95214 TCRIT1, TCRIT2 and TCRIT3 outputs are triggered when any unmasked channel exceeds its corresponding programmable limit and can be used to shutdown the system, to turn on the system fans or as a microcontroller interrupt function. The current status of the TCRIT1, TCRIT2, and TCRIT3 pins can be read back from the status registers. Mask registers are available for further control of the TCRIT outputs.

Two LM95214 remote temperature channels have programmable digital filters while the other two remote channels use a fault-queue to minimize unwanted TCRIT events when temperature spikes are encountered.

For optimum flexibility and accuracy, each LM95214 channel includes registers for offset correction. A three-level address pin allows connection of up to 3 LM95214s to the same SMBus master. The LM95214 includes power saving functions such as: programmable conversion rate, shutdown mode, and disabling of unused channels.

The LM95214 device is an 11-bit digital temperature sensor with a 2-wire System Management Bus (SMBus) interface that can very accurately monitor the temperature of four remote diodes as well as its own temperature. The four remote diodes can be external devices such as microprocessors, graphics processors that target the ideality of a 2N3904 transistor or diode-connected 2N3904s.

The LM95214 reports temperature in two different formats for +127.875°C/–128°C range and 0°C/255°C range. The LM95214 TCRIT1, TCRIT2 and TCRIT3 outputs are triggered when any unmasked channel exceeds its corresponding programmable limit and can be used to shutdown the system, to turn on the system fans or as a microcontroller interrupt function. The current status of the TCRIT1, TCRIT2, and TCRIT3 pins can be read back from the status registers. Mask registers are available for further control of the TCRIT outputs.

Two LM95214 remote temperature channels have programmable digital filters while the other two remote channels use a fault-queue to minimize unwanted TCRIT events when temperature spikes are encountered.

For optimum flexibility and accuracy, each LM95214 channel includes registers for offset correction. A three-level address pin allows connection of up to 3 LM95214s to the same SMBus master. The LM95214 includes power saving functions such as: programmable conversion rate, shutdown mode, and disabling of unused channels.
filter Find other Digital temperature sensors
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Pin-for-pin with same functionality to the compared device
LM95234 ACTIVE ±2°C Quad Remote and Local Temperature Sensor with TruTherm Technology and SMBus Interface TruTherm technology BJT beta compensation.

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 1
Type Title Date
* Data sheet LM95214 Quad Remote Diode and Local Temperature Sensor With SMBus Interface datasheet (Rev. B) PDF | HTML 29 Aug 2017

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Support software

SENSOREVAL — Eval Board Software For Hardware Monitors And Digital Temperature Sensors

SensorEval
SensorEval software supports the latest TI temperature sensor and hardware monitor evaluation boards via USB interface. It also allows access to sensors mounted directly on motherboards that support Intel chip sets.

  • Download SensorEval Software and Manual
  • Windows XP support is offered for (...)
Supported products & hardware

Supported products & hardware

Products
Digital temperature sensors
  • LM63 — 1 remote and local temperature sensor with fan control
  • LM64 — 1 remote and local temp sensor with fan control and 5 GPIO's
  • LM71 — ±1.5°C Temperature Sensor with SPI Interface
  • LM71-Q1 — Automotive Grade, ±1.5°C Temperature Sensor with SPI Interface
  • LM73 — ±1°C Temperature Sensor with I2C/SMBus Interface
  • LM75A — 2C industry standard temperature sensor, I2C/SMBus interface
  • LM86 — ±0.75°C remote and local temperature sensor with SMBus interface
  • LM89 — ±0.75°C remote and local temperature sensor with SMBus interface and 2 addresses for bus sharing
  • LM90 — Remote and Local Temperature Sensor with SMBus Interface
  • LM93 — 2 remote, 1 local temp sensor with hardware monitor and 16 power supply voltage monitors
  • LM95010 — ±2°C Temperature Sensor with SensorPath Interface
  • LM95071 — ±1°C Temperature Sensor with SPI Interface
  • LM95172-Q1 — Automotive Grade, ±1°C Temperature Sensor with 200°C Capability and SPI Interface
  • LM95214 — ±2°C Quad Remote and Local Temperature Sensor with SMBus Interface
  • LM95221 — ±3°C dual remote & local temperature sensor with beta compensation and SMBus, I2C
  • LM95231 — Dual Remote and Local Temperature Sensor with TruTherm Technology and SMBus Interface
  • LM95233 — ±2°C Dual Remote and Local Temperature Sensor with TruTherm Technology and SMBus Interface
  • LM95234 — ±2°C Quad Remote and Local Temperature Sensor with TruTherm Technology and SMBus Interface
  • LM95235 — ±0.75°C remote & local temperature sensor with SMBus, beta compensation for 65/90n
  • LM95235-Q1 — Automotive Grade, ±2°C Remote and Local Temperature Sensor with TruTherm Technology and SMBus
  • LM95241 — ±1.25°C dual remote & local temperature sensor with beta compensation and SMBus, I
  • LM95245 — ±0.75°C remote & local temperature sensor with SMBus, beta compensation for 45nm d
  • LM96000 — Hardware monitor with fan control and 6 power supply voltage monitors
  • LM96080 — 1 local temp sensor with fan speed and power supply voltage monitor
  • LM96163 — 1 remote and local temp sensor with beta compensation and fan control
  • LM99 — Remote and Local Temperature Sensor with TruTherm Technology and SMBus Interface
Precision ADCs
  • ADC128D818 — 12-Bit, 82SPS, 8-Ch Delta-Sigma ADC with Temp Sensor, INT / EXT Voltage Reference & I2C Interface
Download
Simulation model

LM95214 IBIS Model

SNIM011.ZIP (20 KB) - IBIS Model
Download
Package Pins CAD symbols, footprints & 3D models
WSON (NHL) 14 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos