Home
Power management
Power switches
High-side switches
Home
Power management
Power switches
High-side switches

TPS1HC100-Q1

ACTIVE

Automotive, 100-mΩ, 2.5-A, one-channel smart high-side switch

alarmNotifications Order now
Data sheet

TPS1HC100-Q1

ACTIVE
Data sheet Order now

Product details

Number of channels 1 Operating voltage (max) (V) 28 Operating voltage (min) (V) 3 Ron (typ) (mΩ) 100 Imax (A) 2.5 Current limit (min) (A) 0.633 Current limit (max) (A) 6.9 Current limit type Adjustable TI functional safety category Functional Safety-Capable Current limit accuracy +/-18% @ 1.9A Current sense accuracy +/-6% @ 1A FET Internal Features Adjustable current limit, Automotive load dump, Current sense output, Fault reporting, Inductive load, Inrush current control, Short circuit protection, Thermal shutdown, Under voltage lock out Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown Rating Automotive
Number of channels 1 Operating voltage (max) (V) 28 Operating voltage (min) (V) 3 Ron (typ) (mΩ) 100 Imax (A) 2.5 Current limit (min) (A) 0.633 Current limit (max) (A) 6.9 Current limit type Adjustable TI functional safety category Functional Safety-Capable Current limit accuracy +/-18% @ 1.9A Current sense accuracy +/-6% @ 1A FET Internal Features Adjustable current limit, Automotive load dump, Current sense output, Fault reporting, Inductive load, Inrush current control, Short circuit protection, Thermal shutdown, Under voltage lock out Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown Rating Automotive
HTSSOP (PWP) 14 32 mm² 5 x 6.4
  • Single-channel smart high-side power switch for 12V automotive systems with full diagnostics
    • Open-drain status output
    • Current sense analog output
  • Wide operating voltage 3V to 28V
  • Low standby current, < 0.5µA at 85°C
  • Operating junction temperature, –40°C to 150°C
  • 1.8V, 3.3V, and 5V logic compatible
  • Fault sense voltage scaling for ADC protection
  • Programmable current limit accuracy ±18% at 1.9A
  • High-accuracy current sense, ±6% at 1A
  • Protection
    • Overload and short-circuit protection
    • Inductive load negative voltage clamp
    • Undervoltage lockout (UVLO) protection
    • Thermal shutdown and swing with self recovery
    • Loss of GND, loss of supply protection
    • Reverse battery protection with external components
  • Diagnostic
    • On- and off-state output open-load and short-to-battery detection
    • Overload and short-to-ground detection
    • Thermal shutdown and swing detection
  • Qualifications
  • 14-pin thermally-enhanced PWP package
  • Single-channel smart high-side power switch for 12V automotive systems with full diagnostics
    • Open-drain status output
    • Current sense analog output
  • Wide operating voltage 3V to 28V
  • Low standby current, < 0.5µA at 85°C
  • Operating junction temperature, –40°C to 150°C
  • 1.8V, 3.3V, and 5V logic compatible
  • Fault sense voltage scaling for ADC protection
  • Programmable current limit accuracy ±18% at 1.9A
  • High-accuracy current sense, ±6% at 1A
  • Protection
    • Overload and short-circuit protection
    • Inductive load negative voltage clamp
    • Undervoltage lockout (UVLO) protection
    • Thermal shutdown and swing with self recovery
    • Loss of GND, loss of supply protection
    • Reverse battery protection with external components
  • Diagnostic
    • On- and off-state output open-load and short-to-battery detection
    • Overload and short-to-ground detection
    • Thermal shutdown and swing detection
  • Qualifications
  • 14-pin thermally-enhanced PWP package

The TPS1HC100-Q1 device is a fully protected high-side power switch, with integrated NMOS power FET and charge pump, targeted for the intelligent control of various loads. Accurate current sense and programmable current limit features differentiate it from the market.

Low logic high threshold, VIH, of 1.5V on the input pins allow use of MCUs GPIO signals to 1.8V. High-accuracy current sensing provides a better real-time monitoring effect and more accurate diagnostics without further calibration. The external high-accuracy current limit allows setting the current limit value by application. The device highly improves the reliability of the system by effectively clamping the inrush current under start-up or short-circuit conditions. The TPS1HC100-Q1 device can be used as a high-side power switch for a wide variety of resistive, inductive, and capacitive loads, including low-wattage bulbs, LEDs, relays, solenoids, and heaters.

The TPS1HC100-Q1 device is a fully protected high-side power switch, with integrated NMOS power FET and charge pump, targeted for the intelligent control of various loads. Accurate current sense and programmable current limit features differentiate it from the market.

Low logic high threshold, VIH, of 1.5V on the input pins allow use of MCUs GPIO signals to 1.8V. High-accuracy current sensing provides a better real-time monitoring effect and more accurate diagnostics without further calibration. The external high-accuracy current limit allows setting the current limit value by application. The device highly improves the reliability of the system by effectively clamping the inrush current under start-up or short-circuit conditions. The TPS1HC100-Q1 device can be used as a high-side power switch for a wide variety of resistive, inductive, and capacitive loads, including low-wattage bulbs, LEDs, relays, solenoids, and heaters.
filter Find other High-side switches
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Pin-for-pin with same functionality to the compared device
TPS1HC30-Q1 ACTIVE Automotive, 30-mΩ, 5-A single-channel smart high-side switch Same functionality and size with 30-mΩ high-side switch.

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 5
Type Title Date
* Data sheet TPS1HC100-Q1 100mΩ, 2.5A Single-Channel Automotive Smart High-Side Switch datasheet (Rev. B) PDF | HTML 27 Feb 2025
Application note Efficiently Driving Automotive Dashboard Loads with TPS1HC100-Q1 PDF | HTML 10 Feb 2022
Functional safety information TPS1HC100-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 09 Dec 2021
Application brief Driving Front Camera Modules with TPS1HC100-Q1 PDF | HTML 31 Aug 2021
EVM User's guide TPS1HC100 Evaluation Module PDF | HTML 19 Jul 2021

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS1HC100EVM — TPS1HC100-Q1 evaluation module for automotive 100-mΩ high-side switch

The TPS1HC100EVM is a hardware evaluation module (EVM) used to enable hardware engineers to evaluate the full performance and functionality of the TPS1HC100-Q1 automotive high-side switch. The TPS1HC100EVM contains everything needed to test and assess the TPS1HC100-Q1 before designing it into part (...)
User guide: PDF | HTML
Buy from a distributor
Simulation model

TPS1HC100-Q1 PSpice Transient Model

SLVMDR0.ZIP (64 KB) - PSpice Model
Download
Calculation tool

TPS1HC100-Q1-ILIM-CALC — TPS1HC100-Q1 current limit calculator

Spreadsheet calculator which will give a minimum and maximum current limit value for the TPS1HC100-Q1 based off of a RILIM value (taking into account resistor tolerances)
Supported products & hardware

Supported products & hardware

Products
High-side switches
TPS1HC100-Q1 — Automotive, 100-mΩ, 2.5-A, one-channel smart high-side switch
Download
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Package Pins CAD symbols, footprints & 3D models
HTSSOP (PWP) 14 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos