NEMKO IEC60950-1-am1 ed2.0
The TPS255x and TPS255x-1 power-distribution switches are intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered and provide up to 1.5A of continuous load current. These devices offer a programmable current-limit threshold from 75mA to 1.7A (typical) through an external resistor. Current-limit accuracy as tight as ±6% can be achieved at the higher current-limit settings. The power-switch rise and fall times are controlled to minimize current surges during turnon and turnoff.
TPS255x devices limit the output current to a safe level by using a constant-current mode when the output load exceeds the current-limit threshold. TPS255x-1 devices provide circuit breaker functionality by latching off the power switch during overcurrent or reverse-voltage situations. An internal reverse-voltage comparator disables the power-switch when the output voltage is driven higher than the input to protect devices on the input side of the switch. The FAULT output asserts low during overcurrent and reverse-voltage conditions.
The TPS25530-1 devices have an integrated quick output discharge path when the switch is turned off, pulling the output down to ground. The current limit range is also extended to 2.64A (typical) with the 10kΩ ILIM setting for this device.
| Top documentation | Type | Title | Format options | Date |
|---|---|---|---|---|
| * | Data sheet | TPS255xx Precision Adjustable Current-Limited Power-Distribution Switches datasheet (Rev. G) | PDF | HTML | Oct 27, 2026 |
| Certificate | TPS255x UL 2367 Certificate of Compliance E169910-20090213 | Jun 25, 2024 | ||
| Certificate | TPS255x UL Certificate of Compliance IEC 62368-1 (Rev. A) | Jun 24, 2024 | ||
| Selection guide | Power Management Guide 2018 (Rev. R) | Jun 25, 2018 | ||
| EVM User's guide | Power-Distribution Switch with Adjustable Current-Limit Evaluation Module | Oct 8, 2008 |
For additional terms or required resources, click any title below to view the detail page where available.
The TPS2552/3DBVEVM and TPS2552/3DRVEVM are evaluation modules (EVM) for Texas Instruments’family of power-distribution switches with adjustable current-limit. These EVMs operate over a 2.5 V to 6.5 V range. An onboard jumper sets the output current-limit to either 0.5 A or (...)
The TPS2552/3DBVEVM and TPS2552/3DRVEVM are evaluation modules (EVM) for Texas Instruments’family of power-distribution switches with adjustable current-limit. These EVMs operate over a 2.5 V to 6.5 V range. An onboard jumper sets the output current-limit to either 0.5 A or (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
| WSON (DRV) | 6 | Ultra Librarian |
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.