UCC283

ACTIVE

3-A, 9-V, ultra-low-dropout voltage regulator with reverse current protection from -40°C to +85°C

Order now

Data sheet

document-pdfAcrobat UCC283-x, UCC383-x: Low-Dropout 3-A Linear Regulator Family datasheet (Rev. B)

UCC283

ACTIVE

Data sheet

Order now

Product details

Output options

Adjustable Output, Fixed Output

Iout (max) (A)

3

Vin (max) (V)

9

Vin (min) (V)

2.8

Vout (max) (V)

8.5

Vout (min) (V)

1.2

Fixed output options (V)

3, 3.3, 5

Rating

Catalog

PSRR at 100 KHz (dB)

18

Iq (typ) (mA)

0.4

Thermal resistance θJA (°C/W)

70

Load capacitance (min) (µF)

10

Regulated outputs (#)

1

Features

Reverse Current Protection

Accuracy (%)

2.5

Dropout voltage (Vdo) (typ) (mV)

400

Operating temperature range (°C)

-40 to 85

Output options

Adjustable Output, Fixed Output

Iout (max) (A)

3

Vin (max) (V)

9

Vin (min) (V)

2.8

Vout (max) (V)

8.5

Vout (min) (V)

1.2

Fixed output options (V)

3, 3.3, 5

Rating

Catalog

PSRR at 100 KHz (dB)

18

Iq (typ) (mA)

0.4

Thermal resistance θJA (°C/W)

70

Load capacitance (min) (µF)

10

Regulated outputs (#)

1

Features

Reverse Current Protection

Accuracy (%)

2.5

Dropout voltage (Vdo) (typ) (mV)

400

Operating temperature range (°C)

-40 to 85

TO-220 (KC)

5

45.212 mm² 10.16 x 4.45

TO-263 (KTT)

5

154.8384 mm² 10.16 x 15.24

TO-263 (KTT)

3

154.8384 mm² 10.16 x 15.24

Precision Positive Linear Series Pass Voltage Regulation
0.45 V Dropout at 3 A
50 mV Dropout at 10 mA
Quiescent Current Under 650 µA Irrespective of Load
Adjustable (5-Lead) Output Voltage Version
Fixed (3-Lead) Versions for 3.3-V and 5-V Outputs
Logic Shutdown Capability
Short-Circuit Power Limit of (3% × V_IN × I_SHORT)
Low V_OUT to V_IN Reverse Leakage
Thermal Shutdown

All trademarks are the property of their respective owners.

Precision Positive Linear Series Pass Voltage Regulation
0.45 V Dropout at 3 A
50 mV Dropout at 10 mA
Quiescent Current Under 650 µA Irrespective of Load
Adjustable (5-Lead) Output Voltage Version
Fixed (3-Lead) Versions for 3.3-V and 5-V Outputs
Logic Shutdown Capability
Short-Circuit Power Limit of (3% × V_IN × I_SHORT)
Low V_OUT to V_IN Reverse Leakage
Thermal Shutdown

All trademarks are the property of their respective owners.

The UCC283–3/–5/–ADJ family of positive linear series pass voltage regulators are tailored for low-drop-out applications where low quiescent power is important. Fabricated with a BiCMOS technology ideally suited for low input-to-output differential applications, the UCC283–5 passes 3 A while requiring only 0.45 V of typical input voltage headroom (ensured 0.6-V dropout).

These regulators include reverse voltage sensing that prevents current in the reverse direction. Quiescent current is always less than 650 µA. These devices have been internally compensated in such a way that the need for a minimum output capacitor has been eliminated.

UCC283–3 and UCC283–5 versions are in 3-lead packages and have preset outputs at 3.3 V and 5.0 V respectively. The output voltage is regulated to 1.5% at room temperature. The UCC283–ADJ version, in a 5-lead package, regulates the output voltage programmed by an external resistor ratio.

Short-circuit current is internally limited. The device responds to a sustained overcurrent condition by turning off after a t_ON time delay. The device then stays off for a period, t_OFF, that is 32 times the t_ON delay. The device then begins pulsing on and off at the t_ON/(t_ON +t_OFF) duty cycle of 3%. This drastically reduces the power dissipation during short-circuit and means heat sinks need only accommodate normal operation. On the 3-leaded versions of the device t_ON is fixed at 750 µs, on the adjustable 5-leaded versions an external capacitor sets the on time. The off time is always 32 × t_ON. The external timing control pin, CT, on the 5-leaded versions also serves as a shutdown input when pulled low.

Internal power dissipation is further controlled with thermal overload protection circuitry. Thermal shutdown occurs if the junction temperature exceeds 165°C. The chip remains off until the temperature has dropped 20°C.

The UCC283 series is specified for operation over the industrial range of –40°C to 85°C, and the UCC383 series is specified from 0°C to 70°C. These devices are available in 3- and 5-pin TO–220 and TO–263 power packages.

The UCC283–3/–5/–ADJ family of positive linear series pass voltage regulators are tailored for low-drop-out applications where low quiescent power is important. Fabricated with a BiCMOS technology ideally suited for low input-to-output differential applications, the UCC283–5 passes 3 A while requiring only 0.45 V of typical input voltage headroom (ensured 0.6-V dropout).

These regulators include reverse voltage sensing that prevents current in the reverse direction. Quiescent current is always less than 650 µA. These devices have been internally compensated in such a way that the need for a minimum output capacitor has been eliminated.

UCC283–3 and UCC283–5 versions are in 3-lead packages and have preset outputs at 3.3 V and 5.0 V respectively. The output voltage is regulated to 1.5% at room temperature. The UCC283–ADJ version, in a 5-lead package, regulates the output voltage programmed by an external resistor ratio.

Short-circuit current is internally limited. The device responds to a sustained overcurrent condition by turning off after a t_ON time delay. The device then stays off for a period, t_OFF, that is 32 times the t_ON delay. The device then begins pulsing on and off at the t_ON/(t_ON +t_OFF) duty cycle of 3%. This drastically reduces the power dissipation during short-circuit and means heat sinks need only accommodate normal operation. On the 3-leaded versions of the device t_ON is fixed at 750 µs, on the adjustable 5-leaded versions an external capacitor sets the on time. The off time is always 32 × t_ON. The external timing control pin, CT, on the 5-leaded versions also serves as a shutdown input when pulled low.

Internal power dissipation is further controlled with thermal overload protection circuitry. Thermal shutdown occurs if the junction temperature exceeds 165°C. The chip remains off until the temperature has dropped 20°C.

The UCC283 series is specified for operation over the industrial range of –40°C to 85°C, and the UCC383 series is specified from 0°C to 70°C. These devices are available in 3- and 5-pin TO–220 and TO–263 power packages.

filter

Find other Linear & low-dropout (LDO) regulators

Download