UC3879

正在供货

具有可选的 UVLO、温度范围为 0°C 至 70°C 的增强型双极性相移全桥控制器

立即订购

数据表

document-pdfAcrobat Phase Shift Resonant Controller 数据表 (Rev. B) (英语)

UC3879

正在供货

数据表

立即订购

产品详情

Vin (max) (V)

20

Operating temperature range (°C)

0 to 70

Control mode

Current, Feedforward, Voltage

Topology

Boost, Buck, Full bridge

Rating

Catalog

Features

Adjustable switching frequency, Current limiting, Error amplifier, Soft start, Soft switching, Synchronization pin

Vin (max) (V)

20

Operating temperature range (°C)

0 to 70

Control mode

Current, Feedforward, Voltage

Topology

Boost, Buck, Full bridge

Rating

Catalog

Features

Adjustable switching frequency, Current limiting, Error amplifier, Soft start, Soft switching, Synchronization pin

PDIP (N)

20

228.702 mm² 24.33 x 9.4

SOIC (DW)

20

131.84 mm² 12.8 x 10.3

Programmable Output Turn On Delay; Zero Delay Available
Compatible with Voltage Mode or Current Mode Topologies
Practical Operation at Switching Frequencies to 300 kHz
10-MHz Error Amplifier
Pin Programmable Undervoltage Lockout
Low Startup Current — 150 µA
Soft Start Control
Outputs Active Low During UVLO

Programmable Output Turn On Delay; Zero Delay Available
Compatible with Voltage Mode or Current Mode Topologies
Practical Operation at Switching Frequencies to 300 kHz
10-MHz Error Amplifier
Pin Programmable Undervoltage Lockout
Low Startup Current — 150 µA
Soft Start Control
Outputs Active Low During UVLO

The UC3879 controls a bridge power stage by phase shifting the switching of one half-bridge with respect to the other. This allows constant frequency pulse width modulation in combination with resonant, zero-voltage switching for high efficiency performance. The UC3879 can be configured to provide control in either voltage mode or current mode operation, with overcurrent shutdown for fast fault protection.

Independently programmable time delays provide dead-time at the turn-on of each output stage, allowing time for each resonant switching interval.

With the oscillator capable of operating in excess of 600 kHz, overall output switching frequencies to 300 kHz are practical. In addition to the standard free running mode, with the CLKSYNC pin, the user may configure the UC3879 to accept an external clock synchronization signal. Alternatively, up to three units can be locked together with the operational frequency determined by the fastest device.

Protective features include an undervoltage lockout and overcurrent protection. Additional features include a 10-MHz error amplifier, a 5-V precision reference, and soft start. The UC3879 is available in 20 pin N, J, DW, and Q and 28 pin L packages.

The UC3879 controls a bridge power stage by phase shifting the switching of one half-bridge with respect to the other. This allows constant frequency pulse width modulation in combination with resonant, zero-voltage switching for high efficiency performance. The UC3879 can be configured to provide control in either voltage mode or current mode operation, with overcurrent shutdown for fast fault protection.

Independently programmable time delays provide dead-time at the turn-on of each output stage, allowing time for each resonant switching interval.

With the oscillator capable of operating in excess of 600 kHz, overall output switching frequencies to 300 kHz are practical. In addition to the standard free running mode, with the CLKSYNC pin, the user may configure the UC3879 to accept an external clock synchronization signal. Alternatively, up to three units can be locked together with the operational frequency determined by the fastest device.

Protective features include an undervoltage lockout and overcurrent protection. Additional features include a 10-MHz error amplifier, a 5-V precision reference, and soft start. The UC3879 is available in 20 pin N, J, DW, and Q and 28 pin L packages.

filter

查找其他交流/直流和直流/直流控制器（外部 FET）

下载