Design tool
LM654XXDESIGN-CALC — LM654XX-Q1 QuickStart design tool
QuickStart design calculator for the LM654XX-Q1
LM654B0-Q1
Automotive, 36VIN, 20A synchronous step-down converter for high efficiency and low EMC
Data sheet
LM654B0-Q1
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, TA
- Built in clocking for stacking of converters
- Internal or external compensation
- Pin selectable output voltage 3.3V and 5V fixed or adjustable from 0.8V to 0.9 × VIN
- Wide input voltage range: 3V to 36V
- Mitigated interference and noise technology – architecture 1 (MINT 1)
- Optimized for low EMI requirements
- Facilitates CISPR 25 Class 5 compliance
- Mode pin configurable +8.5% or +17% dual-random spread spectrum reducing peak emissions
- Enhanced HotRod™ QFN package with symmetrical pinout
- Switching frequency from 300kHz to 2.2MHz
- Pin-configurable AUTO or FPWM operation
- Can be synchronized to external clock
- Low minimum on time: 32ns (typical)
- Enables 36V to 3.3V conversion at 2.2MHz
- High-efficiency and high power density
- > 94% efficiency at 12VIN to 5VOUT, IOUT = 15A, 400kHz
- 8µA PFM no-load input current with bias pin at VOUT
- 4.5mm × 4.5mm eQFN-26 with wettable flanks
The LM654xx-Q1 is a buck converter family designed for high efficiency, high-power density, and low EMI performance with mitigated interference and noise technology (MINT 1) switcher technology for automotive applications. The converter operates over a wide input voltage range of 3V to 36V with pin selectable fixed output voltages of 3.3V and 5V or an adjustable output.
The low EMI operation is enabled with minimized loop inductance, optimized SW node slew-rate, and pin-selectable +8.5% or +17% dual-random spread spectrum (DRSS). The DRSS significantly reduces peak emissions through a combination of triangular and pseudo-random modulation while keeping output voltage ripple very low.
The current-mode control architecture with 32ns typical minimum on-time allows high conversion ratios at high frequencies, fast transient response, and excellent load and line regulation.
Request more information
The full data sheet, calculator tool and other information is available. Request now
Technical documentation
No results found. Please clear your search and try again.
View all 2
| Top documentation | Type | Title | Format options | Date |
|---|---|---|---|---|
| * | Data sheet | LM654xx-Q1 Pin-Compatible 20A (25A Peak), 15A, 12A, 10A, Stackable Automotive Buck Converters With Mitigated Interference and Noise Technology (MINT) datasheet (Rev. A) | PDF | HTML | 29 Jun 2026 |
| Functional safety information | LM6x4xx Functional Safety FIT Rate, FMD and Pin FMA | PDF | HTML | 30 Jun 2026 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Evaluation board
LM654B0EVM-1PH — LM654B0-Q1 evaluation module
The Texas Instruments LM654B0EVM evaluation module (EVM) helps designers evaluate the operation and performance of the LM654xx family of wide input voltage buck converters. The LM654xx family are easy to use synchronous step-down converters capable of supplying up to 10A, 12A, 15A, or 20A of load (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| WQFN-FCRLF (VDA) | 26 | Ultra Librarian |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.