The TL1451A incorporates on a single monolithic chip all the functions required in the construction of two pulse-width-modulation (PWM) control circuits. Designed primarily for power-supply control, the TL1451A contains an on-chip 2.5-V regulator, two error amplifiers, an adjustable oscillator, two dead-time comparators, undervoltage lockout circuitry, and dual common-emitter output transistor circuits.
The uncommitted output transistors provide common-emitter output capability for each controller. The internal amplifiers exhibit a common-mode voltage range from 1.04 V to 1.45 V. The dead-time control (DTC) comparator has no offset unless externally altered and can provide 0% to 100% dead time. The on-chip oscillator can be operated by terminating RT and CT. During low VCC conditions, the undervoltage lockout control circuit feature locks the outputs off until the internal circuitry is operational.
The TL1451AC is characterized for operation from -20°C to 85°C. The TL1451AQ is characterized for operation from -40°C to 125°C. The TL1451AM is characterized for operation from -55°C to 125°C.
| Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | Dual Pulse-Width-Modulation Control Circuits datasheet (Rev. E) | 13 Mar 2002 | |
| Application note | 스트컨버터의 전력계 기본 계산 (Rev. D) | PDF | HTML | 21 Nov 2022 | |
| Application note | Basic Calculation of a Boost Converter's Power Stage (Rev. D) | PDF | HTML | 28 Oct 2022 | |
| Application note | Understanding Inverting Buck-Boost Power Stages in Switch Mode Power Supplies (Rev. B) | 12 Mar 2019 | ||
| Application note | Understanding Boost Power Stages In Switchmode Power Supplies | 04 Mar 1999 | ||
| Application note | Understanding Buck Power Stages In Switchmode Power Supplies | 04 Mar 1999 |
For additional terms or required resources, click any title below to view the detail page where available.
This tool helps a power supply engineer to select the right isolated DC-DC topology based on the specifications. Depending on the topology chosen, the calculator also recommends the right IC for the design.
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| PDIP (N) | 16 | Ultra Librarian |
| SOIC (D) | 16 | Ultra Librarian |
| SOP (NS) | 16 | Ultra Librarian |
| SSOP (DB) | 16 | Ultra Librarian |
| TSSOP (PW) | 16 | Ultra Librarian |
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.