Home Interface USB ICs USB Type-C & USB Power Delivery ICs
Home
Interface
USB ICs
USB Type-C & USB Power Delivery ICs

TPS25772-Q1

ACTIVE

Automotive dual-port USB Type-C® PD controller with buck-boost regulator and smart power management

Order now
Data sheet
User guides

TPS25772-Q1

ACTIVE
Data sheet Order now

Product details

Function Type-C Type DC/DC converter, PD controller Power role Source Alternate mode No External power-path control I2C Data role Dataless Internal power path 20 V 3 A Rating Automotive Dead battery support No Operating temperature range (°C) -40 to 125
Function Type-C Type DC/DC converter, PD controller Power role Source Alternate mode No External power-path control I2C Data role Dataless Internal power path 20 V 3 A Rating Automotive Dead battery support No Operating temperature range (°C) -40 to 125
VQFN-HR (RQL) 29 30 mm² 6 x 5
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C2b
    • Enhanced connector pin ESD protection
  • USB power delivery (PD) controller with programmable power supply (PPS) support
    • Wide VIN: 5.5V to 18V (40V maximum)
    • Integrated buck-boost with 4 power switches supporting up to 65W USB PD output power
    • VBUS output: 3.3–21V with ±20mV step size
    • IBUS output: 0–3A with ±50mA current limit step size
    • VBUS short circuit to VBAT and GND protection
    • VBUS cable droop compensation
    • MFi overcurrent protection
    • Switching frequency: 300, 400, 450kHz
    • DC/DC sync in/out with dithering
  • USB port configuration options
    • 1 USB-PD port (TPS25762-Q1)
    • 1 USB-PD port with DisplayPort™ over USB-C™ (DP alternate mode) (TPS25763-Q1)
    • 2 USB-PD ports (TPS25772-Q1)
  • Compliant to USB
    • USB Type-C power delivery Rev 3.1
      • TPS25762-Q1: USB–IF certification with PPS, TID: 9509
      • TPS25772-Q1: USB–IF certification with PPS, TID: 9161
      • CC logic, VCONN source and discharge
      • USB cable polarity detection
    • Battery charging specification v1.2 (BC1.2)
      • DCP: dedicated charging port
  • Legacy fast charging
    • 2.7V divider-3 mode
    • 1.2V divider mode
    • high voltage DCP Protocol
  • Microcontroller core allows
  • Short to VBUS and VBAT protection
    • VBUS
    • Px_ DP and Px_DM
    • Px_CC1 and Px_CC2
  • HotRod™ QFN package with wettable flank
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C2b
    • Enhanced connector pin ESD protection
  • USB power delivery (PD) controller with programmable power supply (PPS) support
    • Wide VIN: 5.5V to 18V (40V maximum)
    • Integrated buck-boost with 4 power switches supporting up to 65W USB PD output power
    • VBUS output: 3.3–21V with ±20mV step size
    • IBUS output: 0–3A with ±50mA current limit step size
    • VBUS short circuit to VBAT and GND protection
    • VBUS cable droop compensation
    • MFi overcurrent protection
    • Switching frequency: 300, 400, 450kHz
    • DC/DC sync in/out with dithering
  • USB port configuration options
    • 1 USB-PD port (TPS25762-Q1)
    • 1 USB-PD port with DisplayPort™ over USB-C™ (DP alternate mode) (TPS25763-Q1)
    • 2 USB-PD ports (TPS25772-Q1)
  • Compliant to USB
    • USB Type-C power delivery Rev 3.1
      • TPS25762-Q1: USB–IF certification with PPS, TID: 9509
      • TPS25772-Q1: USB–IF certification with PPS, TID: 9161
      • CC logic, VCONN source and discharge
      • USB cable polarity detection
    • Battery charging specification v1.2 (BC1.2)
      • DCP: dedicated charging port
  • Legacy fast charging
    • 2.7V divider-3 mode
    • 1.2V divider mode
    • high voltage DCP Protocol
  • Microcontroller core allows
  • Short to VBUS and VBAT protection
    • VBUS
    • Px_ DP and Px_DM
    • Px_CC1 and Px_CC2
  • HotRod™ QFN package with wettable flank

The TPS25772-Q1 is a fully integrated dual-port USB Type-C® Power Delivery (PD) solution with integrated buck-boost converter for automotive dual USB port applications. Functionality includes: integrated Buck-Boost converter with 4 power switches; an ARM Cortex-M0; USB port controller with Type-C cable plug and orientation detection; USB Battery Charging Specification Version 1.2 (BC1.2) detection; USB Endpoint PHY; device power management and supervisory circuitry; and connector pin over-voltage and short-circuit protection;

An intelligent System Power Management (SPM) Engine maximizes delivered USB power while protecting the system from automotive battery transient and over-temperature conditions.

Device configuration settings are selected through an intuitive graphical user interface (GUI).

The TPS25772-Q1 is a fully integrated dual-port USB Type-C® Power Delivery (PD) solution with integrated buck-boost converter for automotive dual USB port applications. Functionality includes: integrated Buck-Boost converter with 4 power switches; an ARM Cortex-M0; USB port controller with Type-C cable plug and orientation detection; USB Battery Charging Specification Version 1.2 (BC1.2) detection; USB Endpoint PHY; device power management and supervisory circuitry; and connector pin over-voltage and short-circuit protection;

An intelligent System Power Management (SPM) Engine maximizes delivered USB power while protecting the system from automotive battery transient and over-temperature conditions.

Device configuration settings are selected through an intuitive graphical user interface (GUI).
filter Find other USB Type-C & USB Power Delivery ICs
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Similar functionality to the compared device
TPS25762-Q1 ACTIVE Automotive USB Type-C® PD controller with integrated buck-boost regulator Automotive single USB PD controller

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 12
Type Title Date
* Data sheet TPS25772-Q1 Automotive Dual USB Type-C® Power Delivery Controller with Buck-Boost Regulator datasheet (Rev. B) PDF | HTML 21 Oct 2024
* User guide TPS257XX-Q1-GUI Configuration Guide (Rev. B) PDF | HTML 27 Feb 2024
* Application note TPS2576x/TPS2577x-Q1 Source Power Policy Management (Rev. A) PDF | HTML 08 Nov 2023
EVM User's guide TPS25772-Q1 Evaluation Module User's Guide (Rev. A) PDF | HTML 18 Sep 2024
EVM User's guide TPS25772Q1EVM-CD-150 Evaluation Module User's Guide (Rev. A) PDF | HTML 18 Sep 2024
Technical article 適用於車載資訊娛樂的高效率、平價 USB 電力輸送 PDF | HTML 14 May 2024
Technical article 차량 인포테인먼트를 위한 효율적이고 경제적인 USB 전원 공급 PDF | HTML 14 May 2024
Technical article Efficient, affordable USB power delivery for vehicle infotainment PDF | HTML 01 Mar 2024
Application note TPS257xx-Q1 Pass Compliance and QuadraMAX Best Practice PDF | HTML 06 Feb 2024
Application brief TPS257x2-Q1 Startup with Astable Supply Voltage PDF | HTML 19 Sep 2023
EVM User's guide TPS25762/72-Q1 EVM User's Guide PDF | HTML 30 Nov 2022
Application brief TI Automotive USB Charging Port Solution PDF | HTML 18 Feb 2022

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS25772DQ1EVM — TPS25772-Q1 evaluation module for D version with dual-port charging

The TPS25772DQ1EVM is an evaluation module (EVM) for TPS25772-Q1 D version, a highly integrated USB Type-C® Power Delivery (PD) controller for use in dual USB port applications including: charging only; charging with USB 2.0/3.0 data. This EVM supports dual ports charging only.

User guide: PDF | HTML
Not available on TI.com
Evaluation board

TPS25772Q1EVM-CD-150 — TPS25772-Q1 evaluation module for dual-port USB Type-C® Power Delivery charger with USB 2.0 HUB

The TPS25772Q1EVM-150 is an evaluation module (EVM) for TPS25772-Q1, a highly integrated USB Type-C® Power Delivery (PD) controller for use in dual-port USB applications including charging only and charging with USB 2.0 or USB 3.0 data. This EVM supports dual-port charging with USB 2.0 data.

User guide: PDF | HTML
Not available on TI.com
GUI for evaluation module (EVM)

TPS257XX-Q1-GUI — Graphical user interface for the TPS2576x-Q1 and TPS2577x-Q1 USB Power Delivery controller device family and EVMs

The TPS257XX-Q1-GUI enables application-specific device configuration and programming of the TPS2576x-Q1 and TPS2577x-Q1 USB Power Delivery controller device family. The GUI is compatible with the corresponding hardware evaluation modules (EVMs) as well as custom hardware designs using the (...)

Supported products & hardware

Supported products & hardware

Products
USB Type-C & USB Power Delivery ICs
TPS25772-Q1 — Automotive dual-port USB Type-C® PD controller with buck-boost regulator and smart power management TPS25762-Q1 — Automotive USB Type-C® PD controller with integrated buck-boost regulator TPS25763-Q1 — Automotive single-port USB Type-C® PD controller with buck-boost regulator and DisplayPort Alt mode
Hardware development
Evaluation board
TPS25772Q1EVM-CD-150 — TPS25772-Q1 evaluation module for dual-port USB Type-C® Power Delivery charger with USB 2.0 HUB TPS25772DQ1EVM — TPS25772-Q1 evaluation module for D version with dual-port charging TPS25763Q1EVM — TPS25763-Q1 evaluation module TPS25762DQ1EVM — TPS25762-Q1 evaluation module for D version with single-port charging
Launch Download
Calculation tool

TPS257XX-Q1-EFFICIENCY-CALC — TPS257xx-Q1 power loss and efficiency calculation spreadsheet

TPS257XX-Q1-EFFICIENCY-CALC is a spreadsheet tool used to estimate power loss and efficiency calculation results for the TPS2576x-Q1 and TPS2577x-Q1 devices. Results are calculated based on fixed device parameters and user-defined parameters.
Supported products & hardware

Supported products & hardware

Products
USB Type-C & USB Power Delivery ICs
TPS25772-Q1 — Automotive dual-port USB Type-C® PD controller with buck-boost regulator and smart power management TPS25762-Q1 — Automotive USB Type-C® PD controller with integrated buck-boost regulator
Download
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
User guide: PDF
View Options
Reference designs

PMP41092 — CISPR 25 Class 5, 400kHz-rated, 60W automotive dual USB Type-C® and USB PD charger reference desi

This reference design is a 60W automotive charger for dual USB Type-C® power delivery (PD) with 45W maximum power per port. The TPS25772-Q1 is used as a dual USB Type-C PD controller with a buck-boost regulator. The TPS55289-Q1 is used as a buck-boost regulator for another port. The board maximum (...)
Test report: PDF
Reference designs

PMP40933 — CISPR 25, Class 5, 400-kHz-rated, 120-W, automotive dual USB Type-C® PD charger reference design

This reference design is an Electromagnetic Interface (EMI)-optimized design for automotive dual USB Type-C® power delivery (PD) charger with 60 W per port. TPS25772-Q1 is used as a dual Type-C PD controller with buck-boost regulator. TPS55288-Q1 is used as a buck-boost regulator for another port. (...)
Test report: PDF
Package Pins CAD symbols, footprints & 3D models
VQFN-HR (RQL) 29 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos