Home Power management DC/DC switching regulators DC/DC controllers
Home
Power management
DC/DC switching regulators
DC/DC controllers

TPS40210-EP

ACTIVE

Enhanced Product 4.5-V to 52-V Input Current Mode Boost Controller

Order now
Data sheet

TPS40210-EP

ACTIVE
Data sheet Order now

Product details

Rating HiRel Enhanced Product Topology Boost, Flyback, Forward, SEPIC Vin (max) (V) 52 Vin (min) (V) 4.5 Vout (max) (V) 300 Vout (min) (V) 4.5 Features Enable, Frequency synchronization, Nonsynchronous rectification Duty cycle (max) (%) 67.3 Iq (typ) (A) 0.00053 Operating temperature range (°C) -55 to 150
Rating HiRel Enhanced Product Topology Boost, Flyback, Forward, SEPIC Vin (max) (V) 52 Vin (min) (V) 4.5 Vout (max) (V) 300 Vout (min) (V) 4.5 Features Enable, Frequency synchronization, Nonsynchronous rectification Duty cycle (max) (%) 67.3 Iq (typ) (A) 0.00053 Operating temperature range (°C) -55 to 150
VSON (DRC) 10 9 mm² 3 x 3
  • For Boost, Flyback, SEPIC, LED Drive Apps
  • Wide Input Operating Voltage: 4.5 V to 52 V
  • Adjustable Oscillator Frequency
  • Fixed Frequency Current Mode Control
  • Internal Slope Compensation
  • Integrated Low-Side Driver
  • Programmable Closed-Loop Soft-Start
  • Overcurrent Protection
  • External Synchronization Capable
  • Reference 700 mV
  • Low Current Disable Function
  • For Boost, Flyback, SEPIC, LED Drive Apps
  • Wide Input Operating Voltage: 4.5 V to 52 V
  • Adjustable Oscillator Frequency
  • Fixed Frequency Current Mode Control
  • Internal Slope Compensation
  • Integrated Low-Side Driver
  • Programmable Closed-Loop Soft-Start
  • Overcurrent Protection
  • External Synchronization Capable
  • Reference 700 mV
  • Low Current Disable Function

The TPS40210-EP is a wide-input voltage (4.5 to 52 V), nonsynchronous boost controller. The device is suitable for topologies which require a grounded source N-channel FET including boost, flyback, SEPIC, and various LED driver applications. The device features include programmable soft-start, overcurrent protection with automatic retry, and programmable oscillator frequency. Current mode control provides improved transient response and simplified loop compensation.

The TPS40210-EP is a wide-input voltage (4.5 to 52 V), nonsynchronous boost controller. The device is suitable for topologies which require a grounded source N-channel FET including boost, flyback, SEPIC, and various LED driver applications. The device features include programmable soft-start, overcurrent protection with automatic retry, and programmable oscillator frequency. Current mode control provides improved transient response and simplified loop compensation.
filter Find other DC/DC controllers
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 2
Top documentation Type Title Format options Date
* Data sheet TPS40210-EP 4.5-V to 52-V Input Current Mode Boost Controller datasheet PDF | HTML 02 Nov 2015
* Radiation & reliability report TPS40210MDRCTEP Reliability Report 16 Feb 2016

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS40210EVM — Development Boards/EVMs

The TPS40210EVM evaluation module (EVM) is a fixed frequency (600kHz) non-synchronous boost converter providing fixed 24.0-V output at up to 2A from a 12V input bus. The EVM is designed to start up from a single supply, so no additional bias voltage is required for start-up. The module uses the (...)
User guide: PDF
Not available on TI.com
Calculation tool

SLURB11 — TPS4021x Quickstart Calculator for Boost Converter Design

The TPS4021x Quickstart Calculator for Boost Converter Design give assistance with the device configuration and external component selection.
Supported products & hardware

Supported products & hardware
Download
Package Pins CAD symbols, footprints & 3D models
VSON (DRC) 10 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos