Calculation tool
SLVRBG8 — TPS61378-Q1 Calculation Tool
Supported products & hardware
Products
AC/DC & DC/DC converters (integrated FET)
- TPS61378-Q1 — 18.5V output, 4.8A synchronous boost converter with load disconnect
Data sheet
TPS61378-Q1
- AEC-Q100 qualified for automotive applications
- Device temperature grade 1: –40°C to 125°C ambient operating temperature range
- TPS61378-Q1 Wettable Flank
- TPS61378L-Q1 Immersion Sn
- Provides shorter production cycle time and longer shelf life
- Function Safety-Capable
- Flexible input and output operation range
- Input voltage range: 2.3V to 14V
- Programmable output voltage : 4.0V to 18.5V
- Input voltage range: 2.3V to 14V
- Fixed output options: 5V, 5.25V, and 5.5V
- Programmable peak current limit: 1A to 4.8A
- Avoid AM band interference and crosstalk
- Dynamically programmable switching frequency: 200kHz to 2.2MHz
- Spread spectrum frequency modulation at FPWM mode
- Optional clock synchronization
- Minimize solution size for space constraint applications
- Integrated LS/HS/ISO FET: RDS(ON) 50mΩ/50mΩ/100mΩ
- Support up to 2.2MHz with small L-C
- Minimized light load and idle state current consumption
- 25µA quiescent current into VIN pin
- 0.5µA shutdown current into VIN pin
- Selectable auto PFM and forced PWM mode
- True load disconnect during shutdown or fault conditions
- Integrated protection features
- Supports VIN close to VOUT operation
- Input undervoltage lockout and output overvoltage protection
- Hiccup output short circuit protection
- Power good indicator
- Thermal shutdown protection at 165°C
- Higher than 90% efficiency under 0.8A load from 3.3V to 9V conversion
The TPS61378-Q1 is a fully-integrated synchronous boost converter with an integrated load disconnect function. The input voltage covers 2.3V to 14V while the maximal output voltage covers up to 18.5V. The switching current limit is programmable from 1A to 4.8A. The device consumes 25µA quiescent current from VIN.
The TPS61378-Q1 employs peak current mode control with the switching frequency programmable from 200kHz to 2.2MHz. The device works in fixed frequency PWM operation in medium to heavy loads. There are two optional modes in light load by configuring the MODE pin: auto PFM mode and forced PWM to balance the efficiency and noise immunity in light load. The switching frequency can be synchronized to an external clock. The TPS61378-Q1 uses the spread spectrum of the internal clock to be more EMI friendly at FPWM mode. In addition, there is an internal soft-start time to limit the inrush current.
The TPS61378-Q1 has various fixed output voltage versions to save the external feedback resistor. It supports the external loop compensation so that the stability and transient response can be optimized at wider VOUT/VIN ranges. It also integrates robust protection features including output short protection, output overvoltage protection, and thermal shutdown protection. The TPS61378-Q1 is available in a 3mm × 3mm 16-pin QFN package with wettable flank.
Similar products you might be interested in
Pin-for-pin with same functionality to the compared device
Same functionality with different pin-out to the compared device
Technical documentation
No results found. Please clear your search and try again.
View all 5 | Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | TPS61378-Q1 25-µA Quiescent Current Synchronous Boost Converter with Load Disconnect datasheet (Rev. E) | PDF | HTML | 17 Oct 2024 |
| Application brief | Novel Plating Technology for Wettable-Flank QFN and SON Packages (Rev. A) | 15 Oct 2024 | ||
| Application note | Measuring and Understanding the Output Voltage Ripple of a Boost Converter | PDF | HTML | 22 Feb 2021 | |
| Functional safety information | TPS61378-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. C) | PDF | HTML | 20 Oct 2020 | |
| User guide | TPS61378Q1EVM-060 Evaluation Module (Rev. A) | PDF | HTML | 11 Sep 2020 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Evaluation board
TPS61378Q1EVM-060 — TPS61378QRTE evaluation module
The TPS61378Q1EVM-060 allows you to evaluate the TPS61378-Q1 fully-integrated synchronous boost converter with optional load disconnect function. The device is suitable as a post-boost for automotive applications, boosting from a regulated 3.3-V or 5-V rail with a programmable current limit up to (...)
Evaluation board
TPS61379Q1EVM-082 — TPS61379Q1 25uA IQ synchronous boost converter evaluation module
The TPS61379-Q1 is a fully-integrated synchronous boost converter with load disconnect function integrated. The device is suitable as a post-boost for automotive applications with a current limit of 2-A and maximum 18.5 V output voltage. It supports an input voltage from 2.3 V to 14 V and 25-uA (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| WQFN (RTE) | 16 | Ultra Librarian |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.