Home Power management Gate drivers Half-bridge drivers
Home
Power management
Gate drivers
Half-bridge drivers

UCC27201A-DIE

ACTIVE

120V Boot, 3-A Peak, High Frequency, High-Side/Low-Side Driver

Order now
Data sheet

UCC27201A-DIE

ACTIVE
Data sheet Order now

Product details

Bootstrap supply voltage (max) (V) 110 Power switch IGBT, MOSFET Input supply voltage (min) (V) 8 Input supply voltage (max) (V) 17 Peak output current (A) 3 Operating temperature range (°C) 0 to 0 Undervoltage lockout (typ) (V) 8 Rating Catalog Propagation delay time (µs) 0.02 Rise time (ns) 8 Fall time (ns) 7 Iq (mA) 0.001 Input threshold TTL Channel input logic TTL Switch node voltage (V) -15 Features Negative voltage handling Driver configuration Dual inputs
Bootstrap supply voltage (max) (V) 110 Power switch IGBT, MOSFET Input supply voltage (min) (V) 8 Input supply voltage (max) (V) 17 Peak output current (A) 3 Operating temperature range (°C) 0 to 0 Undervoltage lockout (typ) (V) 8 Rating Catalog Propagation delay time (µs) 0.02 Rise time (ns) 8 Fall time (ns) 7 Iq (mA) 0.001 Input threshold TTL Channel input logic TTL Switch node voltage (V) -15 Features Negative voltage handling Driver configuration Dual inputs
DIESALE (TD) — See data sheet
  • Drives Two N-Channel MOSFETs in
    High-Side/Low-Side Configuration
  • Maximum Boot Voltage
  • Maximum VDD Voltage
  • On-Chip RD Bootstrap Diode
  • Under Voltage Lockout for High-Side and
    Low-Side Driver
  • Drives Two N-Channel MOSFETs in
    High-Side/Low-Side Configuration
  • Maximum Boot Voltage
  • Maximum VDD Voltage
  • On-Chip RD Bootstrap Diode
  • Under Voltage Lockout for High-Side and
    Low-Side Driver

The UCC27201A is a high frequency N-Channel MOSFET driver that includes a bootstrap diode and high-side/low-side driver with independent inputs for maximum control flexibility. This allows for N-Channel MOSFET control in half-bridge, full-bridge, two-switch forward and active clamp forward converters. The low-side and the high-side gate drivers are independently controlled and matched to 1-ns between the turn-on and turn-off of each other. The UCC27201A is based on the popular UCC27201 drivers, but offers some enhancements. In order to improve performance in noisy power supply environments the UCC27201A has an enhanced ESD input structure and also has the ability to withstand a maximum of -18 V on its HS pin.

The UCC27201A is a high frequency N-Channel MOSFET driver that includes a bootstrap diode and high-side/low-side driver with independent inputs for maximum control flexibility. This allows for N-Channel MOSFET control in half-bridge, full-bridge, two-switch forward and active clamp forward converters. The low-side and the high-side gate drivers are independently controlled and matched to 1-ns between the turn-on and turn-off of each other. The UCC27201A is based on the popular UCC27201 drivers, but offers some enhancements. In order to improve performance in noisy power supply environments the UCC27201A has an enhanced ESD input structure and also has the ability to withstand a maximum of -18 V on its HS pin.
filter Find other Half-bridge drivers
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 4
Type Title Date
* Data sheet High Frequency, High-Side/Low-Side Driver datasheet 30 Aug 2012
Application brief External Gate Resistor Selection Guide (Rev. A) 28 Feb 2020
Application brief Understanding Peak IOH and IOL Currents (Rev. A) 28 Feb 2020
More literature Fundamentals of MOSFET and IGBT Gate Driver Circuits (Replaces SLUP169) (Rev. A) 29 Oct 2018

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Calculation tool

SLURB12 — UCC272xx Schematic Review Template

Supported products & hardware

Supported products & hardware

Products
Half-bridge drivers
UCC27200 — 3-A, 120-V half bridge gate driver with 8-V UVLO and CMOS inputs UCC27200-Q1 — Automotive 3-A, 120-V half bridge gate driver with 8-V UVLO and CMOS inputs UCC27200A — 3-A, 120-V half bridge gate driver with 8-V UVLO, negative voltage handling and CMOS inputs UCC27201 — 3-A, 120-V half bridge gate driver with 8-V UVLO and TTL inputs UCC27201A — 3-A, 120-V half bridge gate driver with 8-V UVLO and negative voltage handling UCC27201A-DIE — 120V Boot, 3-A Peak, High Frequency, High-Side/Low-Side Driver UCC27201A-Q1 — Automotive 3-A, 120-V half bridge gate driver with 8-V UVLO and negative voltage handling UCC27210 — 4-A, 120-V half bridge gate driver with 8-V UVLO and CMOS inputs UCC27211 — 4-A, 120-V half bridge gate driver with 8-V UVLO and TTL inputs UCC27211A — 4-A, 120-V half bridge gate driver with 8-V UVLO and negative voltage handling UCC27211A-Q1 — Automotive 4-A, 120-V half bridge gate driver with 8-V UVLO and negative voltage handling UCC27212 — 4-A, 120-V half bridge gate driver with 5-V UVLO and negative voltage handling UCC27212A-Q1 — Automotive, 4-A , 120-V half bridge gate driver with 5-V UVLO UCC27282 — 3-A, 120-V half-bridge gate driver with 5-V UVLO, interlock and enable UCC27282-Q1 — Automotive 3-A, 120-V half bridge driver with 5-V UVLO, interlock and enable UCC27284 — 3-A, 120-V half bridge gate driver with 5-V UVLO and enable UCC27284-Q1 — Automotive 3-A, 120-V half bridge gate driver with 5-V UVLO UCC27288 — 2.5-A to 3.5-A 120-V half-bridge driver with 8-V UVLO and no internal bootstrap diode UCC27289 — 2.5-A to 3.5-A, 120-V half bridge gate driver with 8-V UVLO and enable
Download
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Package Pins CAD symbols, footprints & 3D models
DIESALE (TD) —
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos