Home Power management AC/DC & DC/DC controllers (external FET)
Home
Power management
AC/DC & DC/DC controllers (external FET)

TPS40322

ACTIVE

Dual Output or Two-phase Synchronous Buck Controller

Order now
Data sheet

TPS40322

ACTIVE
Data sheet Order now

Product details

Vin (min) (V) 3 Vin (max) (V) 20 Iout (max) (A) 60 Operating temperature range (°C) -40 to 125 Control mode Voltage mode Topology Multiphase Rating Catalog Vout (min) (V) 0.6 Vout (max) (V) 5.6 Features Enable, Frequency synchronization, Multiple Outputs, Phase Interleaving, Power good, Remote Sense Iq (typ) (µA) 6000 Duty cycle (max) (%) 95 Number of phases 2
Vin (min) (V) 3 Vin (max) (V) 20 Iout (max) (A) 60 Operating temperature range (°C) -40 to 125 Control mode Voltage mode Topology Multiphase Rating Catalog Vout (min) (V) 0.6 Vout (max) (V) 5.6 Features Enable, Frequency synchronization, Multiple Outputs, Phase Interleaving, Power good, Remote Sense Iq (typ) (µA) 6000 Duty cycle (max) (%) 95 Number of phases 2
VQFN (RHB) 32 25 mm² 5 x 5
  • Dual-Output or Two-Phase Synchronous Buck
    Controller
  • 180° Out-of-Phase Reduces Input Ripple
  • Input Voltage Range: 3 V to 20 V
  • Output Voltage Range: 0.6 V to 5.6 V
  • Adjustable Frequency: 100 kHz to 1 MHz
  • Bidirectional SYNC Pin With 0°/180° or 90°/270°
    Phase Shift
  • Voltage Mode Control With Input Feedforward
  • Accurate Current Sharing for Two-Phase
    Operation
  • Individual Power Good Outputs
  • Individual Enable and Programmable Soft Start,
    With Pre-Bias Start-Up
  • ±0.5%, 600-mV Reference
  • Output UV/OV Protection and Input Undervoltage
    Lockout
  • Individual Overcurrent Limit Setting
  • Hiccup Overcurrent Protection
  • Accurate Inductor DCR or Resistive Current
    Sensing
  • Remote Sense for Two-Phase Applications
  • Internal N-Channel FET Drivers
  • Integrated Bootstrap Switches
  • Available in 5-mm × 5-mm 32-Pin VQFN Package
  • Dual-Output or Two-Phase Synchronous Buck
    Controller
  • 180° Out-of-Phase Reduces Input Ripple
  • Input Voltage Range: 3 V to 20 V
  • Output Voltage Range: 0.6 V to 5.6 V
  • Adjustable Frequency: 100 kHz to 1 MHz
  • Bidirectional SYNC Pin With 0°/180° or 90°/270°
    Phase Shift
  • Voltage Mode Control With Input Feedforward
  • Accurate Current Sharing for Two-Phase
    Operation
  • Individual Power Good Outputs
  • Individual Enable and Programmable Soft Start,
    With Pre-Bias Start-Up
  • ±0.5%, 600-mV Reference
  • Output UV/OV Protection and Input Undervoltage
    Lockout
  • Individual Overcurrent Limit Setting
  • Hiccup Overcurrent Protection
  • Accurate Inductor DCR or Resistive Current
    Sensing
  • Remote Sense for Two-Phase Applications
  • Internal N-Channel FET Drivers
  • Integrated Bootstrap Switches
  • Available in 5-mm × 5-mm 32-Pin VQFN Package

The TPS40322 device is a dual-output, synchronous buck controller. It can also be configured as a single-output, two-phase controller. The 180° out-of-phase operation reduces the input current ripple and extends the input capacitor lifetime. Bidirectional master and slave synchronization function provides evenly distributed phase shift for a four-output system that reduces input ripple further and attenuates the system noise.

The wide input range can support 3.3-V, 5-V, and 12-V buses. The accurate reference voltage satisfies the precision voltage needed by ASICs and potentially reduces the output capacitance requirement. Separate PGOOD signals provide flexibility for system monitoring and sequencing. The two channels are independently controlled and each soft-start time is programmable. Voltage mode control is implemented to reduce noise sensitivity and also ensures low duty ratio conversion.

The TPS40322 device is a dual-output, synchronous buck controller. It can also be configured as a single-output, two-phase controller. The 180° out-of-phase operation reduces the input current ripple and extends the input capacitor lifetime. Bidirectional master and slave synchronization function provides evenly distributed phase shift for a four-output system that reduces input ripple further and attenuates the system noise.

The wide input range can support 3.3-V, 5-V, and 12-V buses. The accurate reference voltage satisfies the precision voltage needed by ASICs and potentially reduces the output capacitance requirement. Separate PGOOD signals provide flexibility for system monitoring and sequencing. The two channels are independently controlled and each soft-start time is programmable. Voltage mode control is implemented to reduce noise sensitivity and also ensures low duty ratio conversion.
filter Find other AC/DC & DC/DC controllers (external FET)
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 7
Type Title Date
* Data sheet TPS40322 Dual Output or Two-Phase Synchronous Buck Controller datasheet (Rev. E) PDF | HTML 07 Jan 2016
Application note Multiphase Buck Design from Start to Finish, Part 1 (Rev. B) 07 Apr 2021
Application note Implementing Output Voltage Offset in the TPS40322 PDF | HTML 23 Nov 2020
Selection guide Power Management Guide 2018 (Rev. R) 25 Jun 2018
Application note SMT Guidelines for Stacked Inductor (Inductor On Top) on Voltage Regulator IC 22 Feb 2016
User guide Using the TPS40322EVM-074 05 Apr 2012
EVM User's guide Using the TPS40322EVM-679 04 May 2011

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS40322EVM-074 — Evaluation Module for TPS40322 Dual Output or Two-phase Synchronous Buck Controller

The Texas Instruments TPS40322EVM-074 evaluation module (EVM) helps designers evaluate the performance of the TPS40322 Dual Output or Two-phase Synchronous Buck Controller. The EVM is designed to use a regulated 4.5Vdc to 15.0Vdc bus to produce a single dual phase 1.2Vdc regulated output at 30A of (...)
User guide: PDF
Not available on TI.com
Evaluation board

TPS40322EVM-679 — Evaluation Module for TPS40322 Dual Output or Two-phase Synchronous Buck Controller

The TPS40322EVM-679 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS40322 Dual Output or Two-phase Synchronous Buck Controller. The EVM is designed to use a regulated 8.0Vdc to 15.0Vdc bus to produce two high current, regulated outputs, one at 1.2Vdc and the (...)
User guide: PDF
Not available on TI.com
Simulation model

TPS40322 PSpice Transient Model

SLUM168.ZIP (161 KB) - PSpice Model
Download
Simulation model

TPS40322 TINA-TI Reference Design

SLUM325.TSC (756 KB) - TINA-TI Reference Design
Download
Simulation model

TPS40322 TINA-TI Transient Spice Model

SLUM326.ZIP (118 KB) - TINA-TI Spice Model
Download
Calculation tool

SLUC263 — Type III Compensation Calculation Tool

Supported products & hardware

Supported products & hardware

Products
AC/DC & DC/DC controllers (external FET)
TPS40007 — 2.25V-5.5V, 300 kHz, Synchronous Buck Controller, Source/ Sink, Prebias Operation TPS40009 — 2.25V-5.5V, 600 kHz, Synchronous Buck Controller, Source/ Sink, Prebias Operation TPS40021 — Enhanced Low Input (2.25V-5.5V) up to 1MHz Frequency, Sync. Buck Controller, source/sink TPS40040 — 2.25 to 5.5 V input, 300 kHz, synchronous buck controller with low pin count TPS40041 — 2.25 to 5.5 V input, 600 kHz, synchronous buck controller with low pin count TPS40055 — Wide Input (8V-40V) up to 1MHz Frequency Synchronous Buck Controller, source/sink TPS40057 — Wide Input (8V-40V) up to 1MHz Frequency Synchronous Buck Controller, source/sink with prebias TPS40075 — 4.5-V to 28-V, synchronous buck controller with voltage feed forward TPS40077 — 4.5-V to 28-V, synchronous buck controller with voltage feed forward in HTSSOP package TPS40101 — 4.5-V to 18-V, synchronous buck controller with advanced sequencing and output margining TPS40170 — 4.5 V to 60 V Wide-Input Synchronous PWM Buck Controller TPS40190 — 4.5-V to 15-V, 20-A synchronous buck controller TPS40192 — 4.5-V to 18-V, 20-A, 600-kHz synchronous buck controller with power good TPS40193 — 4.5-V to 18-V, 20-A, 300-kHz synchronous buck controller with power good TPS40195 — 4.5-V to 20-V, 20-A, synchronous buck controller with power good and synchronization TPS40200 — Wide Input Non-Synchronous Buck DC/DC Controller TPS40303 — 3-V to 20-V, 25-A, 300-kHz synchronous buck controller with FSS TPS40304 — 3-V to 20-V, 25-A, 600-kHz synchronous buck controller with FSS TPS40305 — 3-V to 20-V, 25-A, 1.2-MHz synchronous buck controller with FSS TPS40322 — Dual Output or Two-phase Synchronous Buck Controller TPS40400 — 3-V to 20-V, 30-A, synchronous buck controller with PMBus™, including Telemetry TPS40422 — Dual Output or Multiphase Synchronous Buck Controller with PMBus TPS5130 — 4.5-V to 28-V, triple synchronous buck controller with LDO controller
AC/DC & DC/DC converters (integrated FET)
TPS53311 — 2.9V to 6V Input, 3A Synchronous Step-Down Converter with Eco-Mode and Smooth PWM TPS53313 — 4.5-V to 16-V, 6-A synchronous buck converter with optimized light load efficiency TPS53316 — High-Efficiency, 5-A Step-Down Regulator with Integrated Switcher TPS56121 — 4.5-V to 14-V, 15-A synchronous SWIFT™ buck converter TPS56221 — 4.5-V to 14-V, 25-A synchronous SWIFT™ buck converter
Download
Calculation tool

SLURAZ4 — TPS40322 Resistor Divider Vout Offset Calculator

Supported products & hardware

Supported products & hardware

Products
AC/DC & DC/DC controllers (external FET)
TPS40322 — Dual Output or Two-phase Synchronous Buck Controller
Download
Reference designs

PMP8962 — 12V input, Compact Dual 5V/5.5A Point-of-Load using NexFET Power Block II Reference Design

PMP8962 is a compact dual 5.5A POL solution in 0.63" by 0.74" size. It showcases CSD87381P power block II with high efficiency and excellent thermal performnce. It has programmable frequency, soft-start, external compensation, adjustable current limit and OCP/OVP/OTP features. It is suitable for (...)
Test report: PDF
Schematic: PDF
Reference designs

PMP20516 — 5V 45A Dual Phase Synchronous Buck Reference Design

This is a synchronous buck reference design that uses TPS40322 in a dual phase topology. It is meant for 12V nominal input voltage and outputs 5V and is capable of providing up to 45A combined on both phases with excellent current sharing. The full load efficiency is 96.7% which provides great (...)
Test report: PDF
Schematic: PDF
Package Pins CAD symbols, footprints & 3D models
VQFN (RHB) 32 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos