CC1110-CC1111

アクティブ

最大 32kB のフラッシュ メモリ搭載、Sub-1GHz ワイヤレス マイコン (MCU)

製品詳細

Protocols Proprietary Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, ASK, OOK Frequency bands 300-348, 391-464, 782-928 Type Wireless MCU TX power (max) (dBm) 10 RAM (kByte) 4 Flash memory (kByte) 32 CPU 8051 Peripherals 12-bit ADC 8-channel, 2 SPI, 2 UART, 5 timers, I2S, USB Sensitivity (best) (dBm) -110 Number of GPIOs 21 RX current (lowest) (mA) 16.2 Data rate (max) (Mbps) 0.5 Rating Catalog Operating temperature range (°C) -40 to 85 Edge AI enabled No
Protocols Proprietary Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, ASK, OOK Frequency bands 300-348, 391-464, 782-928 Type Wireless MCU TX power (max) (dBm) 10 RAM (kByte) 4 Flash memory (kByte) 32 CPU 8051 Peripherals 12-bit ADC 8-channel, 2 SPI, 2 UART, 5 timers, I2S, USB Sensitivity (best) (dBm) -110 Number of GPIOs 21 RX current (lowest) (mA) 16.2 Data rate (max) (Mbps) 0.5 Rating Catalog Operating temperature range (°C) -40 to 85 Edge AI enabled No
VQFN (RHH) 36 36 mm² 6 x 6 VQFNP (RSP) 36 36 mm² 6 x 6
  • Radio
    • High-performance RF transceiver based on the
      market-leading CC1101
    • Excellent receiver selectivity and blocking
      performance
    • High sensitivity (–110 dBm at 1.2 kBaud)
    • Programmable data rate up to 500 kBaud
    • Programmable output power up to 10 dBm
      for all supported frequencies
    • Frequency range: 300 – 348 MHz, 391 – 464 MHz
      and 782 – 928 MHz
    • Digital RSSI / LQI support
  • Low Power
    • Low current consumption (RX: 16.2 mA at 1.2 kBaud, TX: 15.2
      mA at −6 dBm output power)
    • 0.3 µA in PM3 (the operating mode with the lowest
      power consumption)
    • 0.5 µA in PM2 (operating mode with the second lowest power
      consumption, timer or external interrupt wakeup)
    • RoHS Compliant 6 mm × 6 mm QFN-40 Package
  • MCU, Memory, and Peripherals
    • High performance and low power 8051 microcontroller
      core.
    • Powerful DMA functionality
    • 8/16/32 KB in-system programmable flash, and 1, 2, 4 KB RAM
    • Full-Speed USB Controller with 1 KB FIFO (CC1111Fx)
    • 128-bit AES security coprocessor
    • 7 – 12 bit ADC with up to eight inputs
    • I2S interface
    • Two USARTs
    • 16-bit timer with DSM mode
    • Three 8-bit timers
    • Hardware debug support
    • 21 (CC1110Fx) or 19 (CC1111Fx) GPIO pins
    • SW compatible with CC2510Fx, CC2511Fx
  • General
    • Wide supply voltage range (2.0V – 3.6V)
    • RoHS compliant 6×6 mm QFN 36 package
  • Radio
    • High-performance RF transceiver based on the
      market-leading CC1101
    • Excellent receiver selectivity and blocking
      performance
    • High sensitivity (–110 dBm at 1.2 kBaud)
    • Programmable data rate up to 500 kBaud
    • Programmable output power up to 10 dBm
      for all supported frequencies
    • Frequency range: 300 – 348 MHz, 391 – 464 MHz
      and 782 – 928 MHz
    • Digital RSSI / LQI support
  • Low Power
    • Low current consumption (RX: 16.2 mA at 1.2 kBaud, TX: 15.2
      mA at −6 dBm output power)
    • 0.3 µA in PM3 (the operating mode with the lowest
      power consumption)
    • 0.5 µA in PM2 (operating mode with the second lowest power
      consumption, timer or external interrupt wakeup)
    • RoHS Compliant 6 mm × 6 mm QFN-40 Package
  • MCU, Memory, and Peripherals
    • High performance and low power 8051 microcontroller
      core.
    • Powerful DMA functionality
    • 8/16/32 KB in-system programmable flash, and 1, 2, 4 KB RAM
    • Full-Speed USB Controller with 1 KB FIFO (CC1111Fx)
    • 128-bit AES security coprocessor
    • 7 – 12 bit ADC with up to eight inputs
    • I2S interface
    • Two USARTs
    • 16-bit timer with DSM mode
    • Three 8-bit timers
    • Hardware debug support
    • 21 (CC1110Fx) or 19 (CC1111Fx) GPIO pins
    • SW compatible with CC2510Fx, CC2511Fx
  • General
    • Wide supply voltage range (2.0V – 3.6V)
    • RoHS compliant 6×6 mm QFN 36 package

The CC1110Fx, CC1111Fx is a true low-power sub- 1 GHz system-on-chip (SoC) designed for low power wireless applications. The CC1110Fx, CC1111Fx combines the excellent performance of the state-of-the-art RF transceiver CC1101 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and up to 4 kB of RAM, and many other powerful features. The small 6x6 mm package makes it very suited for applications with size limitations.

The CC1110Fx, CC1111Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC1111Fx adds a full-speed USB 2.0 interface to the feature set of the CC1110Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.

The CC1110Fx, CC1111Fx is a true low-power sub- 1 GHz system-on-chip (SoC) designed for low power wireless applications. The CC1110Fx, CC1111Fx combines the excellent performance of the state-of-the-art RF transceiver CC1101 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and up to 4 kB of RAM, and many other powerful features. The small 6x6 mm package makes it very suited for applications with size limitations.

The CC1110Fx, CC1111Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC1111Fx adds a full-speed USB 2.0 interface to the feature set of the CC1110Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
36 をすべて表示
上位の文書 タイプ タイトル フォーマットオプション 最新の英語版をダウンロード 日付
* データシート True System-on-Chip with Low-Power RF Transceiver and 8051 MCU データシート (Rev. H) 2013年 7月 10日
* エラッタ CC1110Fx/CC1111Fx Errata Note (Rev. C) 2012年 12月 4日
アプリケーション・ノート DN035 -- Antenna Quick Guide (Rev. B) 2022年 2月 9日
アプリケーション・ノート DN507 -- FEC Decoding 2019年 3月 21日
ホワイト・ペーパー Migrating your proprietary solution to the SimpleLink™ WMCU 2018年 11月 7日
アプリケーション・ノート CC11xx Sensitivity Versus Frequency Offset and Crystal Accuracy (Rev. D) PDF | HTML 2018年 9月 27日
アプリケーション・ノート CRC Implementation (Rev. E) PDF | HTML 2018年 9月 27日
その他の技術資料 無線通信ソリューション 2015年 11月 4日
アプリケーション・ノート DN024 -- 868 MHz, 915 MHz and 955 MHz Monopole PCB Antenna (Rev. E) 2013年 2月 22日
アプリケーション・ノート DN119 -- Asynchronous Serial Mode for CC111xFx and CC251xFx (Rev. A) 2012年 3月 21日
アプリケーション・ノート DN022 -- CC110x CC111x OOK ASK Register Settings (Rev. E) 2012年 3月 8日
アプリケーション・ノート DN036 -- CC1101+CC1190 600 kbps Data Rate, +19 dBm Transmit (Rev. A) 2011年 11月 7日
アプリケーション・ノート DN025 -- Johanson Technology Matched Balun Filters (Rev. A) 2011年 10月 13日
アプリケーション・ノート AN101 - Bootloader for CC2510/11 and CC1110/1111 Soc(System-on-Chip) Transceiver (Rev. A) 2011年 9月 8日
アプリケーション・ノート DN023 -- 868 MHz, 915 MHz and 955 MHz Inverted F Antenna (Rev. C) 2011年 8月 30日
アプリケーション・ノート AN099 - Wireless Microphone with USB Interface 2011年 6月 1日
アプリケーション・ノート AN096 Using CC1190 Front End with CC1101 under FCC 15.247 (Rev. A) 2011年 5月 2日
アプリケーション・ノート AN094 -- Using the CC1190 Front End with CC1101 under EN 300 220 2011年 1月 11日
アプリケーション・ノート AN058 -- Antenna Selection Guide (Rev. B) 2010年 10月 6日
アプリケーション・ノート AN082 -- One Way and Two-Way Audio Communications using the CC1110 or CC2 (Rev. A) 2010年 9月 30日
アプリケーション・ノート DN031 -- CC-Antenna-DK Documentation and Antenna Measurements Summary 2010年 8月 26日
アプリケーション・ノート DN006 -- CC11xx Settings for FCC15.247 Solutions (Rev. B) 2010年 8月 17日
アプリケーション・ノート DN505 -- RSSI interpretation and timing (Rev. D) 2010年 6月 16日
アプリケーション・ノート DN107 -- DMA and Radio Configuration (Rev. A) 2009年 12月 17日
アプリケーション・ノート DN118 -- Porting SimpliciTI to the SmartRF CCxx10 Target Board 2009年 12月 1日
アプリケーション・ノート DN117 -- SimpliciTI-compatible UART Driver 2009年 9月 22日
アプリケーション・ノート AN080 -- LED Lighting with Remote Control using CC2510 and CC1110 2009年 9月 16日
アプリケーション・ノート DN112 -- Using UART in CC111xFx CC243x CC251xFx and CC253xFx (Rev. B) 2009年 8月 11日
アプリケーション・ノート DN113 CC111xFx CC243xFx CC251xFx CC253xFx SPI Interface (Rev. A) 2009年 8月 11日
アプリケーション・ノート DN116 -- Clearing Module Interrupt Flags in LPW SoC Devices 2009年 8月 3日
アプリケーション・ノート DN115 -- Using PWM for Dimmer Function in LED Lighting 2009年 6月 16日
アプリケーション・ノート DN111 - Current Consumption for a Polling Receiver (Rev. A) 2009年 3月 24日
アプリケーション・ノート DN017 -- CC11xx 868/915 MHz RF Matching (Rev. A) 2008年 3月 31日
アプリケーション・ノート DN101 -- Using the ADC to Measure Supply Voltage (Rev. A) 2007年 10月 22日
アプリケーション・ノート DN102 -- SoC Temperature Sensor (Rev. A) 2007年 10月 22日
アプリケーション・ノート DN504 -- FEC Implementation (Rev. A) 2007年 10月 22日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

デバッグ・プローブ

CC-DEBUGGER — デバッガおよびプログラマ、RF システム・オン・チップ用

The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling (...)

ユーザー ガイド: PDF
サンプル・コードまたはデモ

SWRC085 CC1110/CC2510 Example Software Supported on IAR Embedded Workbench

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

サンプル・コードまたはデモ

SWRC117 CC1110, CC2510 Basic Software Examples

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

ファームウェア

SWRC088 CC USB Firmware Library and Examples

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

サポート・ソフトウェア

PACKET-SNIFFER SmartRF™ Packet Sniffer 2.18.1

The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

サポート・ソフトウェア

RF-RANGE-ESTIMATOR RF Range Estimator

This tool is used to calculate a range estimate for indoor and outdoor RF links using TI wireless devices. The outdoor calculation is based upon Line-of-Sight (LOS). For the indoor estimation, construction materials can be selected that are between the Tx and Rx unit. The greater the attenuation (...)
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

計算ツール

SMARTRF-STUDIO-7 SmartRF スタジオ

SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

ダウンロードオプション
設計ツール

3P-WIRELESS-MODULES — サードパーティ無線モジュール検索ツール

サード パーティーのワイヤレス モジュール検索ツールを使用すると、開発中の最終製品の仕様を満たす製品を特定し、製造に対応したワイヤレス モジュールを調達することができます。この検索ツールに掲載されているサード パーティーのモジュール ベンダ各社は、TI のワイヤレス コネクティビティ製品を活用したワイヤレス モジュールの設計や製造に関する専門知識がある独立系サード パーティー企業です。
設計ツール

SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS — SimplElink™ CC1xxx デバイス向けハードウェア設計レビュー

SimpleLink Sub-1GHz ハードウェアの設計レビュー プロセスの開始方法:
  • ステップ 1:レビューを依頼する前に、対応する製品ページ (以下の CC1xxx 製品ページへのリンクを参照) に掲載されている技術資料と設計や開発向けのリソースをお客様の側で参照することが重要です。
  • ステップ 2:Hardware Design Review Request Form (ハードウェア設計のレビュー依頼フォーム) をダウンロードして入力します。
  • ステップ 3:入力が完了した Hardware Design Review Request Form (ハードウェア設計のレビュー依頼フォーム) (...)
パッケージ ピン数 CAD シンボル、フットプリント、および 3D モデル
VQFN (RHH) 36 Ultra Librarian
VQFNP (RSP) 36 Ultra Librarian

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 使用材料
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブ拠点
  • アセンブリ拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ