LMX2571EPEVM
LMX2571-EP 1.34GHz、低消費電力、極限温度拡張 RF シンセサイザの評価基板
LMX2571EPEVM
概要
LMX2571-EP 評価基板は、LMX2571-EP の開発向けのプラットフォームです。この製品は、低消費電力の高性能 RF シンセサイザであり、10MHz ~ 1,344MHz の範囲内で周波数を生成できるほか、-55℃ ~ 125℃ の拡張温度範囲全体で動作します。
特長
- 外部電圧制御発振器 (VCO) オプション
- 出力チャネル・デバイダは、10MHz ~ 1,400MHz の動作をサポート
- ダイレクト・デジタル FSK (周波数シフト・キーイング、周波数偏移) 変調
- –55℃ ~ 125℃ の拡張温度範囲
開始する
- LMX2571EPEVM のご注文
- TICSPRO SW と PLLATINUMSIM-SW のダウンロードとインストール
- LMX2571EPEVM ユーザー ガイドを読みます
- TICSPRO SW を使用して複数のレジスタを構成し、PLLATINUMSIM-SW で性能をシミュレート
購入と開発の開始
評価ボード
LMX2571EPEVM — LMX2571-EP evaluation module for 1.34-GHz, low-power, extreme-temperature RF synthesizer
TI.com で取り扱いなし
PLLATINUMSIM-SW — PLLatinum Sim Tool
バージョン: 1.6.8
リリース日: 26 12 2024
製品
クロック・バッファ
クロック・ジェネレータ
クロック ジッタ クリーナ
発振器
ハードウェア開発
評価ボード
リリース情報
Bug fixes
最新情報
- Added LMK6H/D/C/P family of oscillators
- Added LMK61 oscillator
- Added LMK3H oscillator
- Added LMX1205
サポート・ソフトウェア
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
バージョン: 1.7.8.0
リリース日: 10 3 2025
TICS Pro 1.7.8.0 installer binary for Windows operating system
製品
クロック・ジェネレータ
クロック・バッファ
発振器
クロック ジッタ クリーナ
クロック ネットワーク シンクロナイザ
RF PLL / シンセサイザ
ハードウェア開発
評価ボード
ドキュメント
TICS Pro 1.7.8.0 Release Notes
TICS Pro 1.7.8.0 Software Manifest
リリース情報
Added
- LMK5C23208A
Improvements
- TCP server returns error descriptions
- TICSPro_TCP.py updated for python ≥ 3.10. Remove type annotations if backward compatibility with older python versions is required.
- LMK5B/5C:
- Warn when GPIOx selects REFx monitor, but REFx is not programmed
- Relative calculation of DPLLx_PH_OFFSET value
- Added fields and improved frequency planning for 1-PPS outputs
- PLLx_RDIV_MUX_SEL only sets recommended values when dropdown is changed; no longer changed by DPLL loop filter calculation or TCS file load
- Advanced Options checkbox added on Getting Started page
- GPIOx descriptions updated for accuracy
- LMK5B12212, LMK5C12212A:
- New step added to Start Page process to reduce current consumption and noise
- SRAM sequence EEPROM generation sets optimized values from new step in Start Page process
- LMK5B33414, LMK5C33414A:
- Simplified programming sequence by combining writes for the output divider synchronization sequence generator
Bug Fixes
- LMK5B12212, LMK5C12212A:
- Some controls which were not register-backed have been updated to be register-backed.
- LMK5B33414, LMK5C33414A:
- Fixed "Set SYNC Enable" buttons on "SYNC/SYSREF/1-PPS" page
Known Issues
- LMK5B and LMK5C family - In some cases, "Assign Selected VCO Settings to Device" and "Apply Output Clock Settings to Device" may need to be pressed twice for certain cascaded configurations to display correctly
- LMK05318 - In some cases, it is necessary to press "Calculate Frequency Plan" twice for correct VCO2 frequency. This issue is resolved in LMK05318B GUI.
- Burst mode page looping requires long delays to halt, and halting may crash the GUI. If possible, do not loop in burst mode.
- User Controls page can sometimes become desynchronized from Raw Registers and other pages. Refer to Raw Registers or other pages for correct values. Saving/Loading and Import/Export of register data is unaffected, and register data will still be written to and read from connected devices correctly.
設計ファイル
技術資料
= TI が選択した主要ドキュメント
結果が見つかりませんでした。検索条件をクリアして、もう一度検索を行ってください。
すべて表示 2
種類 | タイトル | 英語版のダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | EVM ユーザー ガイド (英語) | LMX2571EPEVM User's Guide (Rev. A) | PDF | HTML | 2022年 5月 5日 | ||
証明書 | LMX2571EPEVM EU Declaration of Conformity (DoC) | 2021年 3月 9日 |